arm: stm32: Enable TCP, IPv6, wget on DH STM32MP15 DHSOM

Enable support for TCP protocol, wget, and IPv6 on this platform.
The former two allow users download payload into the U-Boot from
a web server, which may be more convenient or easier to set up
than TFTP server. The later is enabled to future proof the IP
stack on this platform.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index b6cd0a47fa79433277f73f8d80d8792eac4f460b..08aac878f8ecb305f6560adfe57825700330952a 100644 (file)
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -76,7 +76,10 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -101,6 +104,8 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.1.1"
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
 CONFIG_STM32_ADC=y
 CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_BOOTCOUNT_LIMIT=y

diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index d1acf9c657ec6bfde8cac2d5788bdf7df1e8ea79..8cd6924b5809f0a24f1d69b8e95fd7a9ed88498e 100644 (file)
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -74,7 +74,10 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -99,6 +102,8 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.1.1"
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
 CONFIG_STM32_ADC=y
 CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_BOOTCOUNT_LIMIT=y