dm: usb: exynos: Adjust XHCI driver to support driver model

Support driver model in the exynos XHCI driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
index 3f86fdca8973cb901e88d109e9d65e0f63f86e21..23c7ecc5d8699714b83a9dabc8be59a8df4fc104 100644 (file)
--- a/drivers/usb/host/xhci-exynos5.c
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -14,6 +14,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <fdtdec.h>
 #include <libfdt.h>
 #include <malloc.h>
@@ -32,20 +33,76 @@
 /* Declare global data pointer */
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_DM_USB
+struct exynos_xhci_platdata {
+       fdt_addr_t hcd_base;
+       fdt_addr_t phy_base;
+       struct gpio_desc vbus_gpio;
+};
+#endif
+
 /**
  * Contains pointers to register base addresses
  * for the usb controller.
  */
 struct exynos_xhci {
+#ifdef CONFIG_DM_USB
+       struct usb_platdata usb_plat;
+#endif
+       struct xhci_ctrl ctrl;
        struct exynos_usb3_phy *usb3_phy;
        struct xhci_hccr *hcd;
        struct dwc3 *dwc3_reg;
+#ifndef CONFIG_DM_USB
        struct gpio_desc vbus_gpio;
+#endif
 };
 
+#ifndef CONFIG_DM_USB
 static struct exynos_xhci exynos;
+#endif
 
-#ifdef CONFIG_OF_CONTROL
+#ifdef CONFIG_DM_USB
+static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+       struct exynos_xhci_platdata *plat = dev_get_platdata(dev);
+       const void *blob = gd->fdt_blob;
+       unsigned int node;
+       int depth;
+
+       /*
+        * Get the base address for XHCI controller from the device node
+        */
+       plat->hcd_base = fdtdec_get_addr(blob, dev->of_offset, "reg");
+       if (plat->hcd_base == FDT_ADDR_T_NONE) {
+               debug("Can't get the XHCI register base address\n");
+               return -ENXIO;
+       }
+
+       depth = 0;
+       node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
+                               COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth);
+       if (node <= 0) {
+               debug("XHCI: Can't get device node for usb3-phy controller\n");
+               return -ENODEV;
+       }
+
+       /*
+        * Get the base address for usbphy from the device node
+        */
+       plat->phy_base = fdtdec_get_addr(blob, node, "reg");
+       if (plat->phy_base == FDT_ADDR_T_NONE) {
+               debug("Can't get the usbphy register address\n");
+               return -ENXIO;
+       }
+
+       /* Vbus gpio */
+       gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
+                            &plat->vbus_gpio, GPIOD_IS_OUT);
+
+       return 0;
+}
+#else
 static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
 {
        fdt_addr_t addr;
@@ -283,6 +340,7 @@ static void exynos_xhci_core_exit(struct exynos_xhci *exynos)
        exynos5_usb3_phy_exit(exynos->usb3_phy);
 }
 
+#ifndef CONFIG_DM_USB
 int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
 {
        struct exynos_xhci *ctx = &exynos;
@@ -326,3 +384,63 @@ void xhci_hcd_stop(int index)
 
        exynos_xhci_core_exit(ctx);
 }
+#endif
+
+#ifdef CONFIG_DM_USB
+static int xhci_usb_probe(struct udevice *dev)
+{
+       struct exynos_xhci_platdata *plat = dev_get_platdata(dev);
+       struct exynos_xhci *ctx = dev_get_priv(dev);
+       struct xhci_hcor *hcor;
+       int ret;
+
+       ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
+       ctx->usb3_phy = (struct exynos_usb3_phy *)plat->phy_base;
+       ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+       hcor = (struct xhci_hcor *)((uint32_t)ctx->hcd +
+                       HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
+
+       /* setup the Vbus gpio here */
+       if (dm_gpio_is_valid(&plat->vbus_gpio))
+               dm_gpio_set_value(&plat->vbus_gpio, 1);
+
+       ret = exynos_xhci_core_init(ctx);
+       if (ret) {
+               puts("XHCI: failed to initialize controller\n");
+               return -EINVAL;
+       }
+
+       return xhci_register(dev, ctx->hcd, hcor);
+}
+
+static int xhci_usb_remove(struct udevice *dev)
+{
+       struct exynos_xhci *ctx = dev_get_priv(dev);
+       int ret;
+
+       ret = xhci_deregister(dev);
+       if (ret)
+               return ret;
+       exynos_xhci_core_exit(ctx);
+
+       return 0;
+}
+
+static const struct udevice_id xhci_usb_ids[] = {
+       { .compatible = "samsung,exynos5250-xhci" },
+       { }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+       .name   = "xhci_exynos",
+       .id     = UCLASS_USB,
+       .of_match = xhci_usb_ids,
+       .ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
+       .probe = xhci_usb_probe,
+       .remove = xhci_usb_remove,
+       .ops    = &xhci_usb_ops,
+       .platdata_auto_alloc_size = sizeof(struct exynos_xhci_platdata),
+       .priv_auto_alloc_size = sizeof(struct exynos_xhci),
+       .flags  = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif