]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: dts: at91: sama5d2_xplained: fix QSPI0 node
authorCyrille Pitchen <cyrille.pitchen@microchip.com>
Tue, 18 Jun 2019 08:51:58 +0000 (08:51 +0000)
committerEugen Hristev <eugen.hristev@microchip.com>
Tue, 9 Jul 2019 06:26:43 +0000 (09:26 +0300)
Fix the following:
- use "jedec,spi-nor" binding, we use jedec compatible flashes
- set bus width to 4, we use quad capable flashes
- differentiate bewteen data and clk and cs pins
- drop partions as we don't use them in u-boot.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
[tudor.ambarus@microchip.com: use "jedec,spi-nor", edit commit message]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
arch/arm/dts/at91-sama5d2_xplained.dts

index c0708feeb7b23696c95cdc75437a9aaa3254d97d..7f0d1696ba3eccf6b72db0e6b460998502433235 100644 (file)
                        };
 
                        qspi0: spi@f0020000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_qspi0_sck_cs_default &pinctrl_qspi0_dat_default>;
                                status = "okay";
+                               u-boot,dm-pre-reloc;
 
                                flash@0 {
-                                       compatible = "atmel,sama5d2-qspi-flash";
+                                       compatible = "jedec,spi-nor";
                                        reg = <0>;
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                       pinctrl-names = "default";
-                                       pinctrl-0 = <&pinctrl_qspi0_default>;
                                        spi-max-frequency = <83000000>;
-
-                                       partition@00000000 {
-                                               label = "boot";
-                                               reg = <0x00000000 0x00c00000>;
-                                       };
-
-                                       partition@00c00000 {
-                                               label = "rootfs";
-                                               reg = <0x00c00000 0x00000000>;
-                                       };
+                                       spi-rx-bus-width = <4>;
+                                       spi-tx-bus-width = <4>;
+                                       u-boot,dm-pre-reloc;
                                };
                        };
 
                                                bias-disable;
                                        };
 
-                                       pinctrl_qspi0_default: qspi0_default {
+                                       pinctrl_qspi0_sck_cs_default: qspi0_sck_cs_default {
                                                pinmux = <PIN_PA22__QSPI0_SCK>,
-                                                        <PIN_PA23__QSPI0_CS>,
-                                                        <PIN_PA24__QSPI0_IO0>,
+                                                        <PIN_PA23__QSPI0_CS>;
+                                               bias-disable;
+                                               u-boot,dm-pre-reloc;
+                                       };
+
+                                       pinctrl_qspi0_dat_default: qspi0_dat_default {
+                                               pinmux = <PIN_PA24__QSPI0_IO0>,
                                                         <PIN_PA25__QSPI0_IO1>,
                                                         <PIN_PA26__QSPI0_IO2>,
                                                         <PIN_PA27__QSPI0_IO3>;
-                                               bias-disable;
+                                               bias-pull-up;
+                                               u-boot,dm-pre-reloc;
                                        };
 
                                        pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {