#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI AM5718 IDK";
linux,default-trigger = "mmc0";
};
};
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+&extcon_usb2 {
+ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
};
};
-&mmc1 {
+&mailbox6 {
status = "okay";
- vmmc-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
};
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI AM5728 IDK";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- };
-
status-leds {
compatible = "gpio-leds";
cpu0-led {
};
};
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
+
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
-&mmc1 {
+&extcon_usb2 {
+ id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+ load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
status = "okay";
- vmmc-supply = <&v3_3d>;
- vmmc_aux-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
};
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
- chosen {
- stdout-path = &uart3;
- };
-
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
display0 = &hdmi0;
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
};
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
- };
-};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
interrupt-controller;
ti,system-power-controller;
+ ti,palmas-override-powerhold;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
};
eeprom: eeprom@50 {
- compatible = "at,24c32";
+ compatible = "atmel,24c32";
reg = <0x50>;
};
};
<&dra7_pmx_core 0x3f8>;
};
+&davinci_mdio {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
&mac {
status = "okay";
dual_emac;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&phy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
};
};
-&pcie1 {
+&pcie1_rc {
+ status = "ok";
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_ep {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
- vmmc-aux-supply = <&ldo1_reg>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
};
--- /dev/null
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
};
&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+
vmmc-supply = <&ldo1_reg>;
};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
+};
--- /dev/null
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra74x.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x";
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led0 {
+ label = "cl-som-am57x:green";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ads7846reg: fixedregulator-ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line Jack",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8731>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ i2c4_pins_default: i2c4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */
+ DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ qspi1_pins: pinmux_qspi1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ >;
+ };
+
+ cpsw_pins_default: cpsw_pins_default {
+ pinctrl-single,pins = <
+ /* Slave at addr 0x0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+ /* Slave at addr 0x1 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_pins_sleep: cpsw_pins_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci_mdio_pins_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ ads7846_pins: pinmux_ads7846_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVA */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* PMIC_3V3 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD / VDDSHV8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* regen1 not used */
+ };
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ rtc0: rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+
+ eeprom_module: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ wm8731: wm8731@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ status = "okay";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi1_pins>;
+
+ spi-max-frequency = <48000000>;
+
+ spi_flash: spi_flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80", "jedec,spi-nor";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <48000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x0>;
+ };
+ };
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <1>; /* CS1 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <31 0>;
+ pendown-gpio = <&gpio1 31 0>;
+
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ wakeup-source;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <0>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb2 {
+ dr_mode = "host";
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&gpio3 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
+
+&gpio2 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
regulator-always-on;
regulator-boot-on;
};
+
+ leds-iio {
+ status = "disabled";
+ compatible = "gpio-leds";
+ led-out0 {
+ label = "out0";
+ gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out1 {
+ label = "out1";
+ gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out2 {
+ label = "out2";
+ gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out3 {
+ label = "out3";
+ gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out4 {
+ label = "out4";
+ gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out5 {
+ label = "out5";
+ gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out6 {
+ label = "out6";
+ gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-out7 {
+ label = "out7";
+ gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
+ >;
+ };
};
&i2c1 {
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
+ ti,palmas-override-powerhold;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ /* ID & VBUS GPIOs provided in board dts */
+ };
+ };
+
+ tpic2810: tpic2810@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
};
};
};
&usb2 {
- dr_mode = "otg";
+ dr_mode = "peripheral";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&v3_3d>;
+ vqmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
max-frequency = <96000000>;
};
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
&qspi {
status = "okay";
spi-max-frequency = <76800000>;
m25p80@0 {
- compatible = "s25fl256s1", "spi-flash", "jedec,spi-nor";
+ compatible = "s25fl256s1", "jedec,spi-nor";
spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
--- /dev/null
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi;
+ };
+};
+
+&dra7_pmx_core {
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */
+ DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ i2c5_pins_default: i2c5_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */
+ >;
+ };
+
+ hdmi_pins: pinmux_hdmi_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ >;
+ };
+
+ hdmi_conn_pins: pinmux_hdmi_conn_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */
+ >;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom_base: atmel@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&dss {
+ status = "ok";
+
+ vdda_video-supply = <&ldoln_reg>;
+
+ port {
+ dpi_lcd_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&lcd0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_default>;
+
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&hdmi_conn {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_conn_pins>;
+
+ hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "dra7:usr1";
+ gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "dra7:usr2";
+ gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "dra7:usr3";
+ gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "dra7:usr4";
+ gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ USER1 {
+ label = "btnUser1";
+ linux,code = <BTN_0>;
+ gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+ };
+
+ USER2 {
+ label = "btnUser2";
+ linux,code = <BTN_1>;
+ gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mcspi1 {
+ status = "okay";
+};
+
+&mcspi2 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ m25p80@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x000010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+ dr_mode = "host";
+};
+
+&atl {
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
-#include <dt-bindings/input/input.h>
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI DRA742";
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
- chosen {
- stdout-path = &uart1;
- tick-timer = &timer2;
- };
-
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ vin-supply = <&smps9_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
regulator-max-microvolt = <1800000>;
};
- extcon_usb1: extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
- };
-
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
- sound0: sound0 {
- compatible = "simple-audio-card";
- simple-audio-card,name = "DRA7xx-EVM";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Line", "Line Out",
- "Microphone", "Mic Jack",
- "Line", "Line In";
- simple-audio-card,routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "Line Out", "LLOUT",
- "Line Out", "RLOUT",
- "MIC3L", "Mic Jack",
- "MIC3R", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "LINE1L", "Line In",
- "LINE1R", "Line In";
- simple-audio-card,format = "dsp_b";
- simple-audio-card,bitclock-master = <&sound0_master>;
- simple-audio-card,frame-master = <&sound0_master>;
- simple-audio-card,bitclock-inversion;
-
- sound0_master: simple-audio-card,cpu {
- sound-dai = <&mcasp3>;
- system-clock-frequency = <5644800>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&tlv320aic3106>;
- clocks = <&atl_clkin2_ck>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led0 {
- label = "dra7:usr1";
- gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led1 {
- label = "dra7:usr2";
- gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led2 {
- label = "dra7:usr3";
- gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led3 {
- label = "dra7:usr4";
- gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- USER1 {
- label = "btnUser1";
- linux,code = <BTN_0>;
- gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
- };
-
- USER2 {
- label = "btnUser2";
- linux,code = <BTN_1>;
- gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
- };
- };
};
&dra7_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&vtt_pin>;
-
- vtt_pin: pinmux_vtt_pin {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
- DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
- >;
- };
-
- mcspi1_pins: pinmux_mcspi1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
- DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
- DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
- DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
- DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
- DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
- DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
- DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
- DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
- DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
- DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
- DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
- DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
- >;
- };
-
- usb1_pins: pinmux_usb1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
- >;
- };
-
- usb2_pins: pinmux_usb2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
- >;
- };
-
- nand_flash_x16: nand_flash_x16 {
- /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
- * So NAND flash requires following switch settings:
- * SW5.1 (NAND_BOOTn) = ON (LOW)
- * SW5.9 (GPMC_WPN) = OFF (HIGH)
- */
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
- DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
- DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
- >;
- };
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
- DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
- DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
- DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
- DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
- DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
- DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
- DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
- DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
- DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
- DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
- DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
-
- /* Slave 2 */
- DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
- >;
-
- };
-
- cpsw_sleep: cpsw_sleep {
- pinctrl-single,pins = <
- /* Slave 1 */
- DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
-
- /* Slave 2 */
- DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
- >;
- };
-
- davinci_mdio_sleep: davinci_mdio_sleep {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
- >;
- };
-
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
>;
};
- atl_pins: pinmux_atl_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
- >;
- };
-
- mcasp3_pins: pinmux_mcasp3_pins {
+ mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
- mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
};
&i2c1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
+ ti,palmas-override-powerhold;
+ ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
- u-boot,i2c-offset-len = <0>;
};
tlv320aic3106: tlv320aic3106@19 {
&i2c2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
pcf_hdmi: gpio@26 {
};
};
-&i2c3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
- clock-frequency = <400000>;
-};
-
-&mcspi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
-};
-
-&uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
- interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x3e0>;
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
&mmc1 {
status = "okay";
vmmc-supply = <&evm_3v3_sd>;
- vmmc_aux-supply = <&ldo1_reg>;
+ vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is always hardwired.
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+ pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
status = "okay";
- vmmc-supply = <&evm_3v3_sw>;
+ vmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
+ pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+ pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+ pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
};
&cpu0 {
cpu0-supply = <&smps123_reg>;
};
-&qspi {
- status = "okay";
-
- spi-max-frequency = <76800000>;
- m25p80@0 {
- compatible = "s25fl256s1", "spi-flash";
- spi-max-frequency = <76800000>;
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* MTD partition table.
- * The ROM checks the first four physical blocks
- * for a valid file to boot and the flash here is
- * 64KiB block size.
- */
- partition@0 {
- label = "QSPI.SPL";
- reg = <0x00000000 0x000010000>;
- };
- partition@1 {
- label = "QSPI.SPL.backup1";
- reg = <0x00010000 0x00010000>;
- };
- partition@2 {
- label = "QSPI.SPL.backup2";
- reg = <0x00020000 0x00010000>;
- };
- partition@3 {
- label = "QSPI.SPL.backup3";
- reg = <0x00030000 0x00010000>;
- };
- partition@4 {
- label = "QSPI.u-boot";
- reg = <0x00040000 0x00100000>;
- };
- partition@5 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00140000 0x00080000>;
- };
- partition@6 {
- label = "QSPI.u-boot-env";
- reg = <0x001c0000 0x00010000>;
- };
- partition@7 {
- label = "QSPI.u-boot-env.backup1";
- reg = <0x001d0000 0x0010000>;
- };
- partition@8 {
- label = "QSPI.kernel";
- reg = <0x001e0000 0x0800000>;
- };
- partition@9 {
- label = "QSPI.file-system";
- reg = <0x009e0000 0x01620000>;
- };
- };
-};
-
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
-&usb1 {
- dr_mode = "peripheral";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_pins>;
-};
-
&elm {
status = "okay";
};
&gpmc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&nand_flash_x16>;
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra7-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
&mac {
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cpsw_default>;
- pinctrl-1 = <&cpsw_sleep>;
dual_emac;
};
dual_emac_res_vlan = <2>;
};
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
-};
-
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
pinctrl-2 = <&dcan1_pins_default>;
};
-&atl {
- pinctrl-names = "default";
- pinctrl-0 = <&atl_pins>;
-
- assigned-clocks = <&abe_dpll_sys_clk_mux>,
- <&atl_gfclk_mux>,
- <&dpll_abe_ck>,
- <&dpll_abe_m2x2_ck>,
- <&atl_clkin2_ck>;
- assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
- assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
+&pcie1_rc {
status = "okay";
-
- atl2 {
- bws = <DRA7_ATL_WS_MCASP2_FSX>;
- aws = <DRA7_ATL_WS_MCASP3_FSX>;
- };
-};
-
-&mcasp3 {
- #sound-dai-cells = <0>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mcasp3_pins>;
- pinctrl-1 = <&mcasp3_sleep_pins>;
-
- assigned-clocks = <&mcasp3_ahclkx_mux>;
- assigned-clock-parents = <&atl_clkin2_ck>;
-
- status = "okay";
-
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- /* 4 serializer */
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 2 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-&mailbox5 {
- status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
- status = "okay";
- };
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
- status = "okay";
- };
-};
-
-&mailbox6 {
- status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
- status = "okay";
- };
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
- status = "okay";
- };
};
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
+ chosen { };
aliases {
i2c0 = &i2c1;
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48211000 0x0 0x1000>,
- <0x0 0x48212000 0x0 0x1000>,
+ <0x0 0x48212000 0x0 0x2000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
compatible = "arm,cortex-a15";
reg = <0>;
- operating-points = <
- /* kHz uV */
- 1000000 1060000
- 1176000 1160000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
};
};
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_wkup>;
+
+ opp_nom-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od-1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ opp-supported-hw = <0xFF 0x02>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
reg = <0x1400 0x0468>;
#address-cells = <1>;
#size-cells = <0>;
+ #pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <32>;
scm_conf1: scm_conf@1c04 {
compatible = "syscon";
reg = <0x1c04 0x0020>;
+ #syscon-cells = <2>;
};
scm_conf_pcie: scm_conf@1c24 {
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
- pcie1: pcie@51000000 {
+ /**
+ * To enable PCI endpoint mode, disable the pcie1_rc
+ * node and enable pcie1_ep mode.
+ */
+ pcie1_rc: pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <0>;
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
+ status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
+
+ pcie1_ep: pcie_ep@51000000 {
+ compatible = "ti,dra7-pcie-ep";
+ reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+ reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+ interrupts = <0 232 0x4>;
+ num-lanes = <1>;
+ num-ib-windows = <4>;
+ num-ob-windows = <16>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ status = "disabled";
+ };
};
axi@1 {
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <1>;
reg = <0x40d00000 0x100>;
};
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
uart1: serial@4806a000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- reg-shift = <2>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
uart2: serial@4806c000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
uart3: serial@48020000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48020000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
uart4: serial@4806e000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
uart5: serial@48066000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48066000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
uart6: serial@48068000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48068000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
uart7: serial@48420000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48420000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
uart8: serial@48422000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48422000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
uart9: serial@48424000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48424000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
uart10: serial@4ae2b000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
- reg-shift = <2>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
+ max-frequency = <192000000>;
};
mmc2: mmc@480b4000 {
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
+ max-frequency = <192000000>;
};
mmc3: mmc@480ad000 {
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
+ /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+ max-frequency = <64000000>;
};
mmc4: mmc@480d1000 {
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
+ max-frequency = <192000000>;
};
mmu0_dsp1: mmu@40d01000 {
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
+ ports-implemented = <0x1>;
};
rtc: rtc@48838000 {
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
cpts_clock_mult = <0x784CFE14>;
cpts_clock_shift = <29>;
- syscon = <&scm_conf>;
reg = <0x48484000 0x1000
0x48485200 0x2E00>;
#address-cells = <1>;
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
ranges;
+ syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@48485000 {
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
+ coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+ coefficients = <0 2000>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+ coefficients = <0 2000>;
+};
+
+&iva_thermal {
+ coefficients = <0 2000>;
+};
+
+&cpu_crit {
+ temperature = <120000>; /* milli Celsius */
};
/include/ "dra7xx-clocks.dtsi"
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
3000000 0x1>;
};
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&lp8732_buck0_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
};
};
+&pcf_lcd {
+ interrupt-parent = <&gpio7>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
&pcf_gpio_21 {
interrupt-parent = <&gpio7>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
&mmc1 {
- vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
};
&mac {
};
&cpsw_emac0 {
- phy-handle = <&dp83867_0>;
+ phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy-handle = <&dp83867_1>;
+ phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
chosen {
stdout-path = &uart1;
- tick-timer = &timer2;
};
evm_12v0: fixedregulator-evm12v0 {
status = "okay";
clock-frequency = <400000>;
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575", "nxp,pcf8575";
- u-boot,i2c-offset-len = <0>;
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
pcf_hdmi: pcf8575@26 {
compatible = "ti,pcf8575", "nxp,pcf8575";
- u-boot,i2c-offset-len = <0>;
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
};
&gpmc {
- status = "okay";
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra72-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
/* To use NAND, DIP switch SW5 must be set like so:
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
};
&usb1 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
};
&usb2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
-
- vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
spi-max-frequency = <76800000>;
m25p80@0 {
- compatible = "s25fl256s1", "spi-flash";
+ compatible = "s25fl256s1";
spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
status = "okay";
};
};
+
+&pcie1_rc {
+ status = "okay";
+};
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
};
&cpsw_emac0 {
- phy-handle = <&dp83867_0>;
+ phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy-handle = <&dp83867_1>;
+ phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
ti,palmas-long-press-seconds = <6>;
};
};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+ vqmmc-supply = <&ldo1_reg>;
+};
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI DRA722";
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
--- /dev/null
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ * 'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
+ 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+};
/ {
compatible = "ti,dra722", "ti,dra72", "ti,dra7";
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
-
- /* cooling options */
- cooling-min-level = <0>;
- cooling-max-level = <2>;
- #cooling-cells = <2>; /* min followed by max */
- };
- };
-
pmu {
compatible = "arm,cortex-a15-pmu";
interrupt-parent = <&wakeupgen>;
<&dss_video1_clk>;
clock-names = "fck", "video1_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+};
--- /dev/null
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50: mmc1_pins_ddr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc4_pins_default: mmc4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_hs: mmc4_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc3_pins_default: mmc3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_hs: mmc3_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr12: mmc3_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr25: mmc3_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr50: mmc3_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr12: mmc4_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr25: mmc4_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+};
compatible = "ti,dra742", "ti,dra74", "ti,dra7";
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
-
- operating-points = <
- /* kHz uV */
- 1000000 1060000
- 1176000 1160000
- >;
-
- clocks = <&dpll_mpu_ck>;
- clock-names = "cpu";
-
- clock-latency = <300000>; /* From omap-cpufreq driver */
-
- /* cooling options */
- cooling-min-level = <0>;
- cooling-max-level = <2>;
- #cooling-cells = <2>; /* min followed by max */
- };
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
};
};
ocp {
+ dsp2_system: dsp_system@41500000 {
+ compatible = "syscon";
+ reg = <0x41500000 0x100>;
+ };
+
omap_dwc3_4: omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
usb4: usb@48950000 {
compatible = "snps,dwc3";
reg = <0x48950000 0x17000>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
- tx-fifo-resize;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
maximum-speed = "high-speed";
dr_mode = "otg";
};
};
+
+ mmu0_dsp2: mmu@41501000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41501000 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp2: mmu@41502000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41502000 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ status = "disabled";
+ };
};
};
+&cpu0_opp_table {
+ opp-shared;
+};
+
&dss {
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
<0x58004300 0x20>,
- <0x58005054 0x4>,
- <0x58005300 0x20>;
+ <0x58009054 0x4>,
+ <0x58009300 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";
<&dss_video2_clk>;
clock-names = "fck", "video1_clk", "video2_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "TI DRA762 EVM";
+ compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ vsys_12v0: fixedregulator-vsys12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_5v0: fixedregulator-vsys5v0 {
+ /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3: fixedregulator-vio_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vio_3v3>;
+ enable-active-high;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ vio_1v8: fixedregulator-vio_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps5_reg>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&vio_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps65917: tps65917@58 {
+ compatible = "ti,tps65917";
+ reg = <0x58>;
+ ti,system-power-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tps65917_pmic {
+ compatible = "ti,tps65917-pmic";
+
+ smps12-in-supply = <&vsys_3v3>;
+ smps3-in-supply = <&vsys_3v3>;
+ smps4-in-supply = <&vsys_3v3>;
+ smps5-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
+ ldo2-in-supply = <&vsys_3v3>;
+ ldo3-in-supply = <&vsys_5v0>;
+ ldo4-in-supply = <&vsys_5v0>;
+ ldo5-in-supply = <&vsys_3v3>;
+
+ tps65917_regulators: regulators {
+ smps12_reg: smps12 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps12";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_CORE */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps4_reg: smps4 {
+ /* VDD_IVA */
+ regulator-name = "smps4";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps5_reg: smps5 {
+ /* VDDS1V8 */
+ regulator-name = "smps5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> VDA_PHY1_1V8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+
+ ldo2_reg: ldo2 {
+ /* LDO2_OUT --> VDA_PHY2_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-bypass;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDA_USB_3V3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDD_SDIO_DV */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
+ };
+
+ lp87565: lp87565@60 {
+ compatible = "ti,lp87565-q1";
+ reg = <0x60>;
+
+ buck10-in-supply =<&vsys_3v3>;
+ buck23-in-supply =<&vsys_3v3>;
+
+ regulators: regulators {
+ buck10_reg: buck10 {
+ /*VDD_MPU*/
+ regulator-name = "buck10";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck23_reg: buck23 {
+ /* VDD_GPU*/
+ regulator-name = "buck23";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcf_lcd: pcf8757@20 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ pcf_gpio_21: pcf8757@21 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_hdmi: pcf8575@26 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vio_3v3>;
+ IOVDD-supply = <&vio_3v3>;
+ DRVDD-supply = <&vio_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&cpu0 {
+ vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vio_3v3_sd>;
+ vmmc_aux-supply = <&ldo4_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is always hardwired.
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vio_1v8>;
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+};
+
+/* No RTC on this device */
+&rtc {
+ status = "disabled";
+};
+
+&mac {
+ status = "okay";
+
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ dp83867_0: ethernet-phy@2 {
+ reg = <2>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+
+ dp83867_1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&qspi {
+ spi-max-frequency = <96000000>;
+ m25p80@0 {
+ spi-max-frequency = <96000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,dra762", "ti,dra7";
+
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+ ti,irqs-skip = <10 67 68 133 139 140>;
+};
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+ assigned-clocks = <&dpll_dsp_ck>;
+ assigned-clock-rates = <600000000>;
};
dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
reg = <0x0244>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_dsp_m2_ck>;
+ assigned-clock-rates = <600000000>;
};
iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+ assigned-clocks = <&dpll_iva_ck>;
+ assigned-clock-rates = <1165000000>;
};
dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
reg = <0x01b0>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_iva_m2_ck>;
+ assigned-clock-rates = <388333334>;
};
iva_dclk: iva_dclk {
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+ assigned-clocks = <&dpll_gpu_ck>;
+ assigned-clock-rates = <1277000000>;
};
dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
reg = <0x02e8>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_gpu_m2_ck>;
+ assigned-clock-rates = <425666667>;
};
dpll_core_m2_ck: dpll_core_m2_ck@130 {
reg = <0x0248>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_dsp_m3x2_ck>;
+ assigned-clock-rates = <400000000>;
};
dpll_gmac_x2_ck: dpll_gmac_x2_ck {
clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
ti,bit-shift = <24>;
reg = <0x0520>;
+ assigned-clocks = <&ipu1_gfclk_mux>;
+ assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 {
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <24>;
reg = <0x1220>;
+ assigned-clocks = <&gpu_core_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <26>;
reg = <0x1220>;
+ assigned-clocks = <&gpu_hyd_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
*/
#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
+/* DRA7 IODELAY configuration parameters */
+#define A_DELAY_PS(val) ((val) & 0xffff)
+#define G_DELAY_PS(val) ((val) & 0xffff)
#endif
projects / u-boot.git / commitdiff
