board: ti: am57xx-idk: Prevent boot for invalid configuation

On am571x-idk there can be following configurations based on Jumper J51
and LCD panel detected.

1) J51 removed (6port): 6 port Ethernet. Disable LCD panel.
2) J51 placed (LCD) + Panel detected: 4 port Ethernet with appropriate LCD.
3) J51 placed (LCD) + Panel not detected/not supported.

Configuration 3 is considered invalid as we can't use display nor ICSS1
ethernet ports due to hardware muxing. Alert the user to fix the
configuration and prevent boot.

Alternative was to allow boot and limit to 4 port Ethernet with no display
but this involved introduction of another DTB for the kernel and was
considered not worth the hassle.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 7528de3e5c3c9955b7f5e54f7a38ff0887d3d7a0..34ca3ec9b02782fdd968fea90b69ed7d76fc936e 100644 (file)
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -36,6 +36,7 @@
 #include <ti-usb-phy-uboot.h>
 #include <mmc.h>
 #include <dm/uclass.h>
+#include <hang.h>
 
 #include "../common/board_detect.h"
 #include "mux_data.h"
@@ -707,6 +708,18 @@ void am57x_idk_lcd_detect(void)
        }
 out:
        env_set("idk_lcd", idk_lcd);
+
+       /*
+        * On AM571x_IDK, no Display with J51 set to LCD is considered as an
+        * invalid configuration and we prevent boot to get user attention.
+        */
+       if (board_is_am571x_idk() && am571x_idk_needs_lcd() &&
+           !strncmp(idk_lcd, "no", 2)) {
+               printf("%s: Invalid HW configuration: display not detected/supported but J51 is set. Remove J51 to boot without display.\n",
+                      __func__);
+               hang();
+       }
+
        return;
 }