configs: tinker: Enable SDRAM, SPL stack

SPL sets up SDRAM while in its board_init_f()
function, it is possible for the stack to move
there before board_init_r() is reached.

So it is required to reserve the stack for SDRAM,
with a proper location and size otherwise any
operations during SPL handoff would leads to failure.

On, this particular context tinker-rk3288 SPL is
failing to launch U-Boot proper on SDRAM due to
lack of stack.

 U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
 Trying to boot from MMC1
 spl: mmc init failed with error: -110
 SPL: failed to boot from all boot devices
 ### ERROR ### Please RESET the board ###

So, enable SPL_STACK_R_ADDR and it's related-config
items for SDRAM, SPL stack to setup properly.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index adab1cba42c1a715a0910047409750eda79c4b8d..359be078acf969b9bbf40348414783e47f0af6f1 100644 (file)
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x01000000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_TINKER_RK3288=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_SIZE_LIMIT=307200
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
@@ -15,6 +16,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y