mx6cuboxi: Fix the reset delay for the AR8035 PHY

Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is
registered") Ethernet is no longer functional:

Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4

This commit does not have an issue in itself, but it revelead a problem
with the Ethernet initialization.

As per the AR8035 datasheet:

"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."

So do as suggested and keep the reset low for 10ms.

Also add a 100us delay after deasserting the reset line
to guarantee that the PHY ID can be read correctly and the Atheros
PHY can be loaded as per Troy Kisky's suggestion.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Tom Rini <trini@konsulko.com>

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index fc37f1eef06da5147e5403d4272d220836c9cfbc..18b08d12fa29f5f40f507f11bf8a3b2cf04fd96d 100644 (file)
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -143,8 +143,9 @@ static void setup_iomux_enet(void)
        SETUP_IOMUX_PADS(enet_pads);
 
        gpio_direction_output(ETH_PHY_RESET, 0);
-       mdelay(2);
+       mdelay(10);
        gpio_set_value(ETH_PHY_RESET, 1);
+       udelay(100);
 }
 
 int board_phy_config(struct phy_device *phydev)