nios2: clean up comments style in start.S

Clean up comments style in start.S.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S
index 6c7c7770441bc88c7f4704280055263ba81c3682..501ac39e3fd993343df03844c76e55ab772a63f2 100644 (file)
--- a/arch/nios2/cpu/start.S
+++ b/arch/nios2/cpu/start.S
@@ -9,16 +9,14 @@
 #include <config.h>
 #include <version.h>
 
-/*************************************************************************
- * RESTART
- ************************************************************************/
-
+       /* RESTART */
        .text
        .global _start
 
 _start:
        wrctl   status, r0              /* Disable interrupts */
-       /* ICACHE INIT -- only the icache line at the reset address
+       /*
+        * ICACHE INIT -- only the icache line at the reset address
         * is invalidated at reset. So the init must stay within
         * the cache line size (8 words). If GERMS is used, we'll
         * just be invalidating the cache a second time. If cache
@@ -32,7 +30,8 @@ _start:
        bgt     r5, r0, 0b
        br      _except_end     /* Skip the tramp */
 
-       /* EXCEPTION TRAMPOLINE -- the following gets copied
+       /*
+        * EXCEPTION TRAMPOLINE -- the following gets copied
         * to the exception address (below), but is otherwise at the
         * default exception vector offset (0x0020).
         */
@@ -42,12 +41,14 @@ _except_start:
        jmp     et
 _except_end:
 
-       /* INTERRUPTS -- for now, all interrupts masked and globally
+       /*
+        * INTERRUPTS -- for now, all interrupts masked and globally
         * disabled.
         */
        wrctl   ienable, r0             /* All disabled */
 
-       /* DCACHE INIT -- if dcache not implemented, initd behaves as
+       /*
+        * DCACHE INIT -- if dcache not implemented, initd behaves as
         * nop.
         */
        movhi   r4, %hi(CONFIG_SYS_DCACHELINE_SIZE)
@@ -59,7 +60,8 @@ _except_end:
        add     r6, r6, r4
        bltu    r6, r5, 1b
 
-       /* RELOCATE CODE, DATA & COMMAND TABLE -- the following code
+       /*
+        * RELOCATE CODE, DATA & COMMAND TABLE -- the following code
         * assumes code, data and the command table are all
         * contiguous. This lets us relocate everything as a single
         * block. Make sure the linker script matches this ;-)
@@ -89,7 +91,8 @@ _cur: movhi   r5, %hi(_cur - _start)
        jmp     r4
 _reloc:
 
-       /* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
+       /*
+        * COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
         * exception address. Define CONFIG_ROM_STUBS to prevent
         * the copy (e.g. exception in flash or in other
         * softare/firmware component).
@@ -111,8 +114,7 @@ _reloc:
 7:
 #endif
 
-       /* STACK INIT -- zero top two words for call back chain.
-        */
+       /* STACK INIT -- zero top two words for call back chain. */
        movhi   sp, %hi(CONFIG_SYS_INIT_SP)
        ori     sp, sp, %lo(CONFIG_SYS_INIT_SP)
        addi    sp, sp, -8
@@ -130,34 +132,31 @@ _reloc:
        mov     sp, r2
        mov     fp, sp
 
-       /*
-        * Call board_init_f -- never returns
-        */
+       /* Call board_init_f -- never returns */
        mov     r4, r0
        movhi   r2, %hi(board_init_f@h)
        ori     r2, r2, %lo(board_init_f@h)
        callr   r2
 
-       /* NEVER RETURNS -- but branch to the _start just
+       /*
+        * NEVER RETURNS -- but branch to the _start just
         * in case ;-)
         */
        br      _start
 
-
-
-/*
- * relocate_code -- Nios2 handles the relocation above. But
- * the generic board code monkeys with the heap, stack, etc.
- * (it makes some assumptions that may not be appropriate
- * for Nios). Nevertheless, we capitulate here.
- *
- * We'll call the board_init_r from here since this isn't
- * supposed to return.
- *
- * void relocate_code (ulong sp, gd_t *global_data,
- *                     ulong reloc_addr)
- *                     __attribute__ ((noreturn));
- */
+       /*
+        * relocate_code -- Nios2 handles the relocation above. But
+        * the generic board code monkeys with the heap, stack, etc.
+        * (it makes some assumptions that may not be appropriate
+        * for Nios). Nevertheless, we capitulate here.
+        *
+        * We'll call the board_init_r from here since this isn't
+        * supposed to return.
+        *
+        * void relocate_code (ulong sp, gd_t *global_data,
+        *                      ulong reloc_addr)
+        *                      __attribute__ ((noreturn));
+        */
        .text
        .global relocate_code