+++ /dev/null
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * (C) Copyright 2014
- * STMicroelectronics
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <stm32_rcc.h>
-#include <asm/io.h>
-#include <asm/arch/stm32.h>
-#include <asm/arch/stm32_periph.h>
-
-#define RCC_CR_HSION (1 << 0)
-#define RCC_CR_HSEON (1 << 16)
-#define RCC_CR_HSERDY (1 << 17)
-#define RCC_CR_HSEBYP (1 << 18)
-#define RCC_CR_CSSON (1 << 19)
-#define RCC_CR_PLLON (1 << 24)
-#define RCC_CR_PLLRDY (1 << 25)
-
-#define RCC_PLLCFGR_PLLM_MASK 0x3F
-#define RCC_PLLCFGR_PLLN_MASK 0x7FC0
-#define RCC_PLLCFGR_PLLP_MASK 0x30000
-#define RCC_PLLCFGR_PLLQ_MASK 0xF000000
-#define RCC_PLLCFGR_PLLSRC (1 << 22)
-#define RCC_PLLCFGR_PLLN_SHIFT 6
-#define RCC_PLLCFGR_PLLP_SHIFT 16
-#define RCC_PLLCFGR_PLLQ_SHIFT 24
-
-#define RCC_CFGR_AHB_PSC_MASK 0xF0
-#define RCC_CFGR_APB1_PSC_MASK 0x1C00
-#define RCC_CFGR_APB2_PSC_MASK 0xE000
-#define RCC_CFGR_SW0 (1 << 0)
-#define RCC_CFGR_SW1 (1 << 1)
-#define RCC_CFGR_SW_MASK 0x3
-#define RCC_CFGR_SW_HSI 0
-#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
-#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
-#define RCC_CFGR_SWS0 (1 << 2)
-#define RCC_CFGR_SWS1 (1 << 3)
-#define RCC_CFGR_SWS_MASK 0xC
-#define RCC_CFGR_SWS_HSI 0
-#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
-#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
-#define RCC_CFGR_HPRE_SHIFT 4
-#define RCC_CFGR_PPRE1_SHIFT 10
-#define RCC_CFGR_PPRE2_SHIFT 13
-
-#define RCC_APB1ENR_PWREN (1 << 28)
-
-/*
- * RCC USART specific definitions
- */
-#define RCC_ENR_USART1EN (1 << 4)
-#define RCC_ENR_USART2EN (1 << 17)
-#define RCC_ENR_USART3EN (1 << 18)
-#define RCC_ENR_USART6EN (1 << 5)
-
-#define PWR_CR_VOS0 (1 << 14)
-#define PWR_CR_VOS1 (1 << 15)
-#define PWR_CR_VOS_MASK 0xC000
-#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0)
-
-/*
- * RCC GPIO specific definitions
- */
-#define RCC_ENR_GPIO_A_EN (1 << 0)
-#define RCC_ENR_GPIO_B_EN (1 << 1)
-#define RCC_ENR_GPIO_C_EN (1 << 2)
-#define RCC_ENR_GPIO_D_EN (1 << 3)
-#define RCC_ENR_GPIO_E_EN (1 << 4)
-#define RCC_ENR_GPIO_F_EN (1 << 5)
-#define RCC_ENR_GPIO_G_EN (1 << 6)
-#define RCC_ENR_GPIO_H_EN (1 << 7)
-#define RCC_ENR_GPIO_I_EN (1 << 8)
-#define RCC_ENR_GPIO_J_EN (1 << 9)
-#define RCC_ENR_GPIO_K_EN (1 << 10)
-
-#if !defined(CONFIG_STM32_HSE_HZ)
-#error "CONFIG_STM32_HSE_HZ not defined!"
-#else
-#if (CONFIG_STM32_HSE_HZ == 8000000)
-#if (CONFIG_SYS_CLK_FREQ == 180000000)
-/* 180 MHz */
-struct pll_psc sys_pll_psc = {
- .pll_m = 8,
- .pll_n = 360,
- .pll_p = 2,
- .pll_q = 8,
- .ahb_psc = AHB_PSC_1,
- .apb1_psc = APB_PSC_4,
- .apb2_psc = APB_PSC_2
-};
-#else
-/* default 168 MHz */
-struct pll_psc sys_pll_psc = {
- .pll_m = 8,
- .pll_n = 336,
- .pll_p = 2,
- .pll_q = 7,
- .ahb_psc = AHB_PSC_1,
- .apb1_psc = APB_PSC_4,
- .apb2_psc = APB_PSC_2
-};
-#endif
-#else
-#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
-#endif
-#endif
-
-int configure_clocks(void)
-{
- /* Reset RCC configuration */
- setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
- writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
- clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
- | RCC_CR_PLLON));
- writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
- clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
- writel(0, &STM32_RCC->cir); /* Disable all interrupts */
-
- /* Configure for HSE+PLL operation */
- setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
- while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
- ;
-
- /* Enable high performance mode, System frequency up to 180 MHz */
- setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
- writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
-
- setbits_le32(&STM32_RCC->cfgr, ((
- sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
- | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
- | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
-
- writel(sys_pll_psc.pll_m
- | (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT)
- | (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT)
- | (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT),
- &STM32_RCC->pllcfgr);
- setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC);
-
- setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
-
- while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
- ;
-
- stm32_flash_latency_cfg(5);
- clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
- setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
-
- while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
- RCC_CFGR_SWS_PLL)
- ;
-
- return 0;
-}
-
-unsigned long clock_get(enum clock clck)
-{
- u32 sysclk = 0;
- u32 shift = 0;
- /* Prescaler table lookups for clock computation */
- u8 ahb_psc_table[16] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
- };
- u8 apb_psc_table[8] = {
- 0, 0, 0, 0, 1, 2, 3, 4
- };
-
- if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
- RCC_CFGR_SWS_PLL) {
- u16 pllm, plln, pllp;
- pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
- plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
- >> RCC_PLLCFGR_PLLN_SHIFT);
- pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
- >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
- sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
- }
-
- switch (clck) {
- case CLOCK_CORE:
- return sysclk;
- break;
- case CLOCK_AHB:
- shift = ahb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
- >> RCC_CFGR_HPRE_SHIFT)];
- return sysclk >>= shift;
- break;
- case CLOCK_APB1:
- shift = apb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
- >> RCC_CFGR_PPRE1_SHIFT)];
- return sysclk >>= shift;
- break;
- case CLOCK_APB2:
- shift = apb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
- >> RCC_CFGR_PPRE2_SHIFT)];
- return sysclk >>= shift;
- break;
- default:
- return 0;
- break;
- }
-}
-
-void clock_setup(int peripheral)
-{
- switch (peripheral) {
- case USART1_CLOCK_CFG:
- setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
- break;
- case GPIO_A_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN);
- break;
- case GPIO_B_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN);
- break;
- case GPIO_C_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN);
- break;
- case GPIO_D_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN);
- break;
- case GPIO_E_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN);
- break;
- case GPIO_F_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN);
- break;
- case GPIO_G_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN);
- break;
- case GPIO_H_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN);
- break;
- case GPIO_I_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN);
- break;
- case GPIO_J_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN);
- break;
- case GPIO_K_CLOCK_CFG:
- setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN);
- break;
- default:
- break;
- }
-}
projects / u-boot.git / commitdiff
