--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * efi_selftest_load_initrd
+ *
+ * Copyright (c) 2020 Ilias Apalodimas <ilias.apalodimas@linaro.org>
+ *
+ * This test checks the FileLoad2 protocol.
+ * A known file is read from the file system and verified.
+ *
+ * An example usage - given a file image with a file system in partition 1
+ * holding file initrd - is:
+ *
+ * * Configure the sandbox with
+ *
+ * CONFIG_EFI_SELFTEST=y
+ * CONFIG_EFI_LOAD_FILE2_INITRD=y
+ * CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
+ *
+ * * Run ./u-boot and execute
+ *
+ * host bind 0 image
+ * setenv efi_selftest load initrd
+ * bootefi selftest
+ *
+ * This would provide a test output like:
+ *
+ * Testing EFI API implementation
+ *
+ * Selected test: 'load initrd'
+ *
+ * Setting up 'load initrd'
+ * Setting up 'load initrd' succeeded
+ *
+ * Executing 'load initrd'
+ * Loaded 12378613 bytes
+ * CRC32 2997478465
+ *
+ * Now the size and CRC32 can be compared to the provided file.
+ */
+
+#include <efi_selftest.h>
+#include <efi_loader.h>
+#include <efi_load_initrd.h>
+
+static struct efi_boot_services *boottime;
+
+static struct efi_initrd_dp dp = {
+ .vendor = {
+ {
+ DEVICE_PATH_TYPE_MEDIA_DEVICE,
+ DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
+ sizeof(dp.vendor),
+ },
+ EFI_INITRD_MEDIA_GUID,
+ },
+ .end = {
+ DEVICE_PATH_TYPE_END,
+ DEVICE_PATH_SUB_TYPE_END,
+ sizeof(dp.end),
+ }
+};
+
+static struct efi_initrd_dp dp_invalid = {
+ .vendor = {
+ {
+ DEVICE_PATH_TYPE_MEDIA_DEVICE,
+ DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
+ sizeof(dp.vendor),
+ },
+ EFI_INITRD_MEDIA_GUID,
+ },
+ .end = {
+ 0x8f, /* invalid */
+ 0xfe, /* invalid */
+ sizeof(dp.end),
+ }
+};
+
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ boottime = systable->boottime;
+
+ return EFI_ST_SUCCESS;
+}
+
+static int execute(void)
+{
+ efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
+ struct efi_load_file_protocol *lf2;
+ struct efi_device_path *dp2, *dp2_invalid;
+ efi_status_t status;
+ efi_handle_t handle;
+ char buffer[64];
+ efi_uintn_t buffer_size;
+ void *buf;
+ u32 crc32;
+
+ memset(buffer, 0, sizeof(buffer));
+
+ dp2 = (struct efi_device_path *)&dp;
+ status = boottime->locate_device_path(&lf2_proto_guid, &dp2, &handle);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Unable to locate device path\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = boottime->handle_protocol(handle, &lf2_proto_guid,
+ (void **)&lf2);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Unable to locate protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Case 1:
+ * buffer_size can't be NULL
+ * protocol can't be NULL
+ */
+ status = lf2->load_file(lf2, dp2, false, NULL, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Buffer size can't be NULL\n");
+ return EFI_ST_FAILURE;
+ }
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(NULL, dp2, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Protocol can't be NULL\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case 2: Match end node type/sub-type on device path
+ */
+ dp2_invalid = (struct efi_device_path *)&dp_invalid;
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Invalid device path type must return EFI_INVALID_PARAMETER\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Invalid device path sub-type must return EFI_INVALID_PARAMETER\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case 3:
+ * BootPolicy 'true' must return EFI_UNSUPPORTED
+ */
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(lf2, dp2, true, &buffer_size, &buffer);
+ if (status != EFI_UNSUPPORTED) {
+ efi_st_error("BootPolicy true must return EFI_UNSUPPORTED\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case: Pass buffer size as zero, firmware must return
+ * EFI_BUFFER_TOO_SMALL and an appropriate size
+ */
+ buffer_size = 0;
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, NULL);
+ if (status != EFI_BUFFER_TOO_SMALL || !buffer_size) {
+ efi_st_printf("buffer_size: %u\n", (unsigned int)buffer_size);
+ efi_st_printf("status: %x\n", (unsigned int)status);
+ efi_st_error("Buffer size not updated\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case: Pass buffer size as smaller than the file_size,
+ * firmware must return * EFI_BUFFER_TOO_SMALL and an appropriate size
+ */
+ buffer_size = 1;
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, &buffer);
+ if (status != EFI_BUFFER_TOO_SMALL || buffer_size <= 1) {
+ efi_st_error("Buffer size not updated\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = boottime->allocate_pool(EFI_BOOT_SERVICES_DATA, buffer_size,
+ &buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Cannot allocate buffer\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Case: Pass correct buffer, load the file and verify checksum*/
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Loading initrd failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ efi_st_printf("Loaded %u bytes\n", (unsigned int)buffer_size);
+ status = boottime->calculate_crc32(buf, buffer_size, &crc32);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Could not determine CRC32\n");
+ return EFI_ST_FAILURE;
+ }
+ efi_st_printf("CRC32 %u\n", (unsigned int)crc32);
+
+ status = boottime->free_pool(buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Cannot free buffer\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+EFI_UNIT_TEST(load_initrd) = {
+ .name = "load initrd",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .on_request = true,
+};
projects / u-boot.git / commitdiff
