CONFIG_RZA1=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="ignore_loglevel"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_ELF is not set
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200n8"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DISPLAY_PRINT=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon"
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\""
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon"
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # "
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_TARGET_STMARK2=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=30000000"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMDLINE_EDITING is not set
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk rw noinitrd mem=64M rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-/* Kernel Boot */
-#define CONFIG_BOOTARGS "ignore_loglevel"
-
/* Network interface */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0
"bootz 0x22000000 - 0x21000000"
#endif
-#ifdef CONFIG_QSPI_BOOT
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-#endif
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; " \
"fatload mmc 0:1 0x22000000 zImage; " \
"bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
#endif
/* SPL */
/* Booting Linux */
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTFILE "zImage"
-#define CONFIG_BOOTARGS \
- "console=ttyS0," __stringify(CONFIG_BAUDRATE) \
- " ubi.fm_autoconvert=1" \
- " uio_pdrv_genirq.of_id=\"idq,regbank\""
#define CONFIG_BOOTCOMMAND \
"setenv bootcmd '" \
* CONFIG_BOOTARGS goes into the environment value "bootargs".
* Do note the value will override also the chosen node in FDT blob.
*/
-#define CONFIG_BOOTARGS "earlycon"
#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \
"run mmcboot"
#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 root=/dev/ram0 rw " \
- "rootfstype=ramfs " \
- "rdinit=/bin/init " \
- "devtmpfs.mount=1"
-
#define CONFIG_BOOTCOMMAND \
"sf probe 0:1 50000000; " \
"sf read ${loadaddr} 0x100000 ${kern_size}; " \
#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
#endif
-#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \
- "rw noinitrd mem=64M " \
- "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
"autoload=no\0" \
"nand read 0x22000000 0x000e0000 0x500000; " \
"bootm"
-#define CONFIG_BOOTARGS \
- "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
-
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \
/* Booting Linux */
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
#define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}"
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR