dm: mmc: fsl_esdhc: handle vqmmc supply

Handle vqmmc supply. Some boards have a fixed I/O voltage
at 1.8V for emmc, so the usdhc also needs to be configured
as 1.8V by setting VSELECT bit. The vs18_enable is the one
that used to checking whether setting VSELECT or not in
the driver. So if vqmmc supply is 1.8V, set vs18_enable,
the driver will set VSELECT.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 74a0017842687c966c5fc918551b12f2658550d0..50ed80a4d8cbc9b80f4a4cca8c1ccd5f9c4fc3a8 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -16,6 +16,7 @@
 #include <hwconfig.h>
 #include <mmc.h>
 #include <part.h>
+#include <power/regulator.h>
 #include <malloc.h>
 #include <fsl_esdhc.h>
 #include <fdt_support.h>
@@ -971,6 +972,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);
        const void *fdt = gd->fdt_blob;
        int node = dev_of_offset(dev);
+       struct udevice *vqmmc_dev;
        fdt_addr_t addr;
        unsigned int val;
        int ret;
@@ -1008,6 +1010,29 @@ static int fsl_esdhc_probe(struct udevice *dev)
        if (ret)
                priv->wp_enable = 0;
 #endif
+
+       priv->vs18_enable = 0;
+
+#ifdef CONFIG_DM_REGULATOR
+       /*
+        * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
+        * otherwise, emmc will work abnormally.
+        */
+       ret = device_get_supply_regulator(dev, "vqmmc-supply", &vqmmc_dev);
+       if (ret) {
+               dev_dbg(dev, "no vqmmc-supply\n");
+       } else {
+               ret = regulator_set_enable(vqmmc_dev, true);
+               if (ret) {
+                       dev_err(dev, "fail to enable vqmmc-supply\n");
+                       return ret;
+               }
+
+               if (regulator_get_value(vqmmc_dev) == 1800000)
+                       priv->vs18_enable = 1;
+       }
+#endif
+
        /*
         * TODO:
         * Because lack of clk driver, if SDHC clk is not enabled,