arm64: dts: zynqmp: Add psgtr and phy entry for USB and SATA node

This patch adds psgtr clocks and phy entry for USB0, USB1 and SATA node for
zc1751-xm017-dc3 board.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index a9bac1dec03e827ebdaa81c59319a0e628df929e..344323ab7f933cee6d36f8124e9c08e0fa4bc10e 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -11,6 +11,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
 
 / {
        model = "ZynqMP zc1751-xm017-dc3 RevA";
@@ -37,6 +38,18 @@
                device_type = "memory";
                reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
        };
+
+       clock_si5338_2: clk26 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <26000000>;
+       };
+
+       clock_si5338_3: clk125 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <125000000>;
+       };
 };
 
 &fpd_dma_chan1 {
@@ -166,6 +179,13 @@
        };
 };
 
+&psgtr {
+       status = "okay";
+       /* usb3, sata */
+       clocks = <&clock_si5338_2>, <&clock_si5338_3>;
+       clock-names = "ref2", "ref3";
+};
+
 &rtc {
        status = "okay";
 };
@@ -181,6 +201,8 @@
        ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
        ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
        ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+       phy-names = "sata-phy";
+       phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
 };
 
 &sdhci1 { /* emmc with some settings */
@@ -205,6 +227,8 @@
        status = "okay";
        dr_mode = "host";
        snps,usb3_lpm_capable;
+       phy-names = "usb3-phy";
+       phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
        maximum-speed = "super-speed";
 };
 
@@ -217,5 +241,7 @@
        status = "okay";
        dr_mode = "host";
        snps,usb3_lpm_capable;
+       phy-names = "usb3-phy";
+       phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
        maximum-speed = "super-speed";
 };