net: dm9000: Replace DM9000_DBG() with debug()

Use standard debug() macro to print debug messages instead of
reinventing driver-specific macro again. No functional change.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 93699135f75badfbbaa31dc98f9b5760e116423d..e83b838fd820623f34b38486c5ead88cfbb6fac9 100644 (file)
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -63,7 +63,6 @@ TODO: external MII is not functional, only internal at the moment.
 /* #define CONFIG_DM9000_DEBUG */
 
 #ifdef CONFIG_DM9000_DEBUG
-#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
 #define DM9000_DMP_PACKET(func,packet,length)  \
        do { \
                int i;                                                  \
@@ -75,7 +74,6 @@ TODO: external MII is not functional, only internal at the moment.
                } printf("\n");                                         \
        } while(0)
 #else
-#define DM9000_DBG(fmt,args...)
 #define DM9000_DMP_PACKET(func,packet,length)
 #endif
 
@@ -128,16 +126,16 @@ static void dm9000_iow(int reg, u8 value);
 static void
 dump_regs(void)
 {
-       DM9000_DBG("\n");
-       DM9000_DBG("NCR   (0x00): %02x\n", dm9000_ior(0));
-       DM9000_DBG("NSR   (0x01): %02x\n", dm9000_ior(1));
-       DM9000_DBG("TCR   (0x02): %02x\n", dm9000_ior(2));
-       DM9000_DBG("TSRI  (0x03): %02x\n", dm9000_ior(3));
-       DM9000_DBG("TSRII (0x04): %02x\n", dm9000_ior(4));
-       DM9000_DBG("RCR   (0x05): %02x\n", dm9000_ior(5));
-       DM9000_DBG("RSR   (0x06): %02x\n", dm9000_ior(6));
-       DM9000_DBG("ISR   (0xFE): %02x\n", dm9000_ior(DM9000_ISR));
-       DM9000_DBG("\n");
+       debug("\n");
+       debug("NCR   (0x00): %02x\n", dm9000_ior(0));
+       debug("NSR   (0x01): %02x\n", dm9000_ior(1));
+       debug("TCR   (0x02): %02x\n", dm9000_ior(2));
+       debug("TSRI  (0x03): %02x\n", dm9000_ior(3));
+       debug("TSRII (0x04): %02x\n", dm9000_ior(4));
+       debug("RCR   (0x05): %02x\n", dm9000_ior(5));
+       debug("RSR   (0x06): %02x\n", dm9000_ior(6));
+       debug("ISR   (0xFE): %02x\n", dm9000_ior(DM9000_ISR));
+       debug("\n");
 }
 #endif
 
@@ -246,7 +244,7 @@ dm9000_probe(void)
 static void
 dm9000_reset(void)
 {
-       DM9000_DBG("resetting DM9000\n");
+       debug("resetting DM9000\n");
 
        /* Reset DM9000,
           see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 */
@@ -259,7 +257,7 @@ dm9000_reset(void)
        dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST));
 
        do {
-               DM9000_DBG("resetting the DM9000, 1st reset\n");
+               debug("resetting the DM9000, 1st reset\n");
                udelay(25); /* Wait at least 20 us */
        } while (dm9000_ior(DM9000_NCR) & 1);
 
@@ -267,7 +265,7 @@ dm9000_reset(void)
        dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST)); /* Issue a second reset */
 
        do {
-               DM9000_DBG("resetting the DM9000, 2nd reset\n");
+               debug("resetting the DM9000, 2nd reset\n");
                udelay(25); /* Wait at least 20 us */
        } while (dm9000_ior(DM9000_NCR) & 1);
 
@@ -285,7 +283,7 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd)
        u8 io_mode;
        struct board_info *db = &dm9000_info;
 
-       DM9000_DBG("%s\n", __func__);
+       debug("%s\n", __func__);
 
        /* RESET device */
        dm9000_reset();
@@ -354,8 +352,8 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd)
 
        /* read back mac, just to be sure */
        for (i = 0, oft = 0x10; i < 6; i++, oft++)
-               DM9000_DBG("%02x:", dm9000_ior(oft));
-       DM9000_DBG("\n");
+               debug("%02x:", dm9000_ior(oft));
+       debug("\n");
 
        /* Activate DM9000 */
        /* RX enable */
@@ -434,7 +432,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length)
        }
        dm9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
 
-       DM9000_DBG("transmit done\n\n");
+       debug("transmit done\n\n");
        return 0;
 }
 
@@ -444,7 +442,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length)
 */
 static void dm9000_halt(struct eth_device *netdev)
 {
-       DM9000_DBG("%s\n", __func__);
+       debug("%s\n", __func__);
 
        /* RESET devie */
        dm9000_phy_write(0, 0x8000);    /* PHY RESET */
@@ -490,12 +488,12 @@ static int dm9000_rx(struct eth_device *netdev)
                if (rxbyte != DM9000_PKT_RDY)
                        return 0; /* No packet received, ignore */
 
-               DM9000_DBG("receiving packet\n");
+               debug("receiving packet\n");
 
                /* A packet ready now  & Get status/length */
                (db->rx_status)(&RxStatus, &RxLen);
 
-               DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+               debug("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
 
                /* Move data from DM9000 */
                /* Read received packet from RX SRAM */
@@ -519,7 +517,7 @@ static int dm9000_rx(struct eth_device *netdev)
                } else {
                        DM9000_DMP_PACKET(__func__ , rdptr, RxLen);
 
-                       DM9000_DBG("passing packet to upper layer\n");
+                       debug("passing packet to upper layer\n");
                        net_process_received_packet(net_rx_packets[0], RxLen);
                }
        }
@@ -596,7 +594,7 @@ dm9000_phy_read(int reg)
        val = (dm9000_ior(DM9000_EPDRH) << 8) | dm9000_ior(DM9000_EPDRL);
 
        /* The read data keeps on REG_0D & REG_0E */
-       DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
+       debug("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
        return val;
 }
 
@@ -616,7 +614,7 @@ dm9000_phy_write(int reg, u16 value)
        dm9000_iow(DM9000_EPCR, 0xa);   /* Issue phyxcer write command */
        udelay(500);                    /* Wait write complete */
        dm9000_iow(DM9000_EPCR, 0x0);   /* Clear phyxcer write command */
-       DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+       debug("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
 }
 
 int dm9000_initialize(struct bd_info *bis)