]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: socfpga: gen5: sync devicetrees to Linux
authorSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Fri, 1 Mar 2019 19:12:28 +0000 (20:12 +0100)
committerMarek Vasut <marex@denx.de>
Wed, 17 Apr 2019 20:20:15 +0000 (22:20 +0200)
This is again a sync to linux-next + pending patches in Dinh's tree at
commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset
properties")'

It adds missing peripheral reset properties to socfpga.dtsi and removes
U-Boot specific leftovers from socfpga_cyclone5_socrates.dts.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
arch/arm/dts/socfpga.dtsi
arch/arm/dts/socfpga_cyclone5_socrates.dts

index 2458d6707dc566953cd3d7f71ad06a58011d3b7c..ec1966480f2f0376522bda05d1e7347821238a46 100644 (file)
@@ -84,6 +84,7 @@
                                #dma-requests = <32>;
                                clocks = <&l4_main_clk>;
                                clock-names = "apb_pclk";
+                               resets = <&rst DMA_RESET>;
                        };
                };
 
                        reg = <0xffc00000 0x1000>;
                        interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
                        clocks = <&can0_clk>;
+                       resets = <&rst CAN0_RESET>;
                        status = "disabled";
                };
 
                        reg = <0xffc01000 0x1000>;
                        interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
                        clocks = <&can1_clk>;
+                       resets = <&rst CAN1_RESET>;
                        status = "disabled";
                };
 
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff708000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO0_RESET>;
                        status = "disabled";
 
                        porta: gpio-controller@0 {
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff709000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO1_RESET>;
                        status = "disabled";
 
                        portb: gpio-controller@0 {
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff70a000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO2_RESET>;
                        status = "disabled";
 
                        portc: gpio-controller@0 {
                        #size-cells = <0>;
                        clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
                        clock-names = "biu", "ciu";
+                       resets = <&rst SDMMC_RESET>;
                        status = "disabled";
                };
 
                              <0xffb80000 0x10000>;
                        reg-names = "nand_data", "denali_reg";
                        interrupts = <0x0 0x90 0x4>;
-                       dma-mask = <0xffffffff>;
                        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
                        clock-names = "nand", "nand_x", "ecc";
+                       resets = <&rst NAND_RESET>;
                        status = "disabled";
                };
 
 
                qspi: spi@ff705000 {
                        compatible = "cdns,qspi-nor";
-                        #address-cells = <1>;
+                       #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0xff705000 0x1000>,
                              <0xffa00000 0x1000>;
                        cdns,fifo-width = <4>;
                        cdns,trigger-address = <0x00000000>;
                        clocks = <&qspi_clk>;
+                       resets = <&rst QSPI_RESET>;
                        status = "disabled";
                };
 
                sdr: sdr@ffc25000 {
                        compatible = "altr,sdr-ctl", "syscon";
                        reg = <0xffc25000 0x1000>;
+                       resets = <&rst SDR_RESET>;
                };
 
                sdramedac {
                        interrupts = <0 154 4>;
                        num-cs = <4>;
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM0_RESET>;
                        status = "disabled";
                };
 
                        interrupts = <0 155 4>;
                        num-cs = <4>;
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM1_RESET>;
                        status = "disabled";
                };
 
                        dmas = <&pdma 28>,
                               <&pdma 29>;
                        dma-names = "tx", "rx";
+                       resets = <&rst UART0_RESET>;
                };
 
                uart1: serial1@ffc03000 {
                        dmas = <&pdma 30>,
                               <&pdma 31>;
                        dma-names = "tx", "rx";
+                       resets = <&rst UART1_RESET>;
                };
 
                usbphy0: usbphy {
                        reg = <0xffd02000 0x1000>;
                        interrupts = <0 171 4>;
                        clocks = <&osc1>;
+                       resets = <&rst L4WD0_RESET>;
                        status = "disabled";
                };
 
                        reg = <0xffd03000 0x1000>;
                        interrupts = <0 172 4>;
                        clocks = <&osc1>;
+                       resets = <&rst L4WD1_RESET>;
                        status = "disabled";
                };
        };
index 93c3fa4a48aad05f588ae7d4772205bb23bec5cb..8d5d3996f6f27122412d68072767d621fa11ae8f 100644 (file)
@@ -76,7 +76,6 @@
 
 &qspi {
        status = "okay";
-       u-boot,dm-pre-reloc;
 
        flash: flash@0 {
                #address-cells = <1>;
@@ -91,6 +90,5 @@
                cdns,tchsh-ns = <4>;
                cdns,tslch-ns = <4>;
                status = "okay";
-               u-boot,dm-pre-reloc;
        };
 };