usb: dwc2: Allow selection of data buffer size

If we use hardware with very small RAM (let's consider just a couple
of hundreds of kB but not megabytes) it is not super convenient to lose
64kB for statically allocated bufer which most probably won't be used
as big as it is. Typically we'll have much shorter data packages to
excahnge and in the worst case longer packets will be split on separate
transactions.

For those corner-cases user will be able to set his buffer size of
choice via USB_DWC2_BUFFER_SIZE option in menuconfig.

By default we'll use 64 kB as it was hard-coeded before so existing
users shouldn't be affected at all.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 90b2f78ec7d938dd8e3e2cd38fd4dee4c6b15e3e..a7249b7511f4552a74ac8431d6ffd41b0666c598 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -245,3 +245,15 @@ config USB_DWC2
          Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
          operation is compliant to the controller Supplement. If you want to
          enable this controller in host mode, say Y.
+
+if USB_DWC2
+config USB_DWC2_BUFFER_SIZE
+       int "Data buffer size in kB"
+       default 64
+       ---help---
+         By default 64 kB buffer is used but if amount of RAM avaialble on
+         the target is not enough to accommodate allocation of buffer of
+         that size it is possible to shrink it. Smaller sizes should be fine
+         because larger transactions could be split in smaller ones.
+
+endif # USB_DWC2

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 0efe645044c547dbd538bcaf34edc5994ec31bd9..e436c711e720c143b312e455b0f232b11163efaf 100644 (file)
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DWC2_HC_CHANNEL                        0
 
 #define DWC2_STATUS_BUF_SIZE           64
-#define DWC2_DATA_BUF_SIZE             (64 * 1024)
+#define DWC2_DATA_BUF_SIZE             (CONFIG_USB_DWC2_BUFFER_SIZE * 1024)
 
 #define MAX_DEVICE                     16
 #define MAX_ENDPOINT                   16