imx: ventana: add GW5913 support

The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC
with the following features:
 - DDR3 DRAM
 - NAND FLASH (256MiB or 2048MiB)
 - Gateworks System Periperhal Controller
 - front panel LED's
 - front panel pushbutton
 - Digital I/O connector (I2C/GPIO/UART)
 - u-blox Zoe-M8Q GPS
 - 1x RJ45 GbE
 - 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket
 - Passive PoE and wide-range DC power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 19351b93d89f6efd72df42dd642ffbc6fcdc67a3..67f8c12147cb597279c4dbd9b2288b14f78b6179 100644 (file)
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -843,6 +843,51 @@ struct dio_cfg gw5906_dio[] = {
        },
 };
 
+struct dio_cfg gw5913_dio[] = {
+       {
+               { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+               IMX_GPIO_NR(1, 16),
+               { 0, 0 },
+               0
+       },
+       {
+               { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+               IMX_GPIO_NR(1, 19),
+               { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+               2
+       },
+       {
+               { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+               IMX_GPIO_NR(1, 17),
+               { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+               3
+       },
+       {
+               { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) },
+               IMX_GPIO_NR(1, 18),
+               { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) },
+               4
+       },
+       {
+               { IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15) },
+               IMX_GPIO_NR(1, 15),
+               { 0, 0 },
+               0
+       },
+       {
+               { IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14) },
+               IMX_GPIO_NR(1, 14),
+               { 0, 0 },
+               0
+       },
+       {
+               { IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05) },
+               IMX_GPIO_NR(4, 5),
+               { 0, 0 },
+               0
+       },
+};
+
 /*
  * Board Specific GPIO
  */
@@ -1082,6 +1127,15 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
                .vsel_pin = IMX_GPIO_NR(6, 14),
                .mmc_cd = IMX_GPIO_NR(7, 0),
        },
+
+       /* GW5913 */
+       {
+               .gpio_pads = gw5912_gpio_pads,
+               .num_pads = ARRAY_SIZE(gw5912_gpio_pads) / 2,
+               .dio_cfg = gw5913_dio,
+               .dio_num = ARRAY_SIZE(gw5913_dio),
+               .wdis = IMX_GPIO_NR(1, 0),
+       },
 };
 
 #define SETUP_GPIO_OUTPUT(gpio, name, level) \

diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index a4f3065c7d2a540385bd302cf22023d92e088405..d21aa3c38ff2066f52bbf7282e598af2f2ca71a7 100644 (file)
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -128,6 +128,8 @@ read_eeprom(int bus, struct ventana_board_info *info)
                        type = GW5910;
                else if (info->model[4] == '1' && info->model[5] == '2')
                        type = GW5912;
+               else if (info->model[4] == '1' && info->model[5] == '3')
+                       type = GW5913;
                break;
        default:
                printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);

diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 9cac4a769c30ac51fe726a048e8a4f8edd808ab8..2d5c27261ea31c5e90bdeb55530080ffdc976d7f 100644 (file)
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -123,6 +123,7 @@ enum {
        GW5909,
        GW5910,
        GW5912,
+       GW5913,
        GW_UNKNOWN,
        GW_BADCRC,
 };