imx8ulp: clock: Support to reset DCNano and MIPI DSI

When LPAV is allocated to RTD, the LPAV won't be reset. So we have to
reset DCNano and MIPI DSI in u-boot before enabling the drivers

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/arch/arm/include/asm/arch-imx8ulp/clock.h b/arch/arm/include/asm/arch-imx8ulp/clock.h
index 24322f3ab20646a3ee17e6b894f1715afa3483b3..cc70284f5557971facfa62482d7803582e7a7533 100644 (file)
--- a/arch/arm/include/asm/arch-imx8ulp/clock.h
+++ b/arch/arm/include/asm/arch-imx8ulp/clock.h
@@ -39,5 +39,6 @@ int set_ddr_clk(u32 phy_freq_mhz);
 void clock_init(void);
 void cgc1_enet_stamp_sel(u32 clk_src);
 void mxs_set_lcdclk(u32 base_addr, u32 freq_in_khz);
+void reset_lcdclk(void);
 void enable_mipi_dsi_clk(unsigned char enable);
 #endif

diff --git a/arch/arm/mach-imx/imx8ulp/clock.c b/arch/arm/mach-imx/imx8ulp/clock.c
index f54fc25763c3e36493d77656d2924c5ab4116f78..d03269ac04675a78b76a55b63c84b2e36c30dee4 100644 (file)
--- a/arch/arm/mach-imx/imx8ulp/clock.c
+++ b/arch/arm/mach-imx/imx8ulp/clock.c
@@ -330,6 +330,7 @@ void enable_mipi_dsi_clk(unsigned char enable)
 {
        if (enable) {
                pcc_clock_enable(5, DSI_PCC5_SLOT, false);
+               pcc_reset_peripheral(5, DSI_PCC5_SLOT, true);
                pcc_clock_sel(5, DSI_PCC5_SLOT, PLL4_PFD3_DIV2);
                pcc_clock_div_config(5, DSI_PCC5_SLOT, 0, 6);
                pcc_clock_enable(5, DSI_PCC5_SLOT, true);
@@ -340,6 +341,13 @@ void enable_mipi_dsi_clk(unsigned char enable)
        }
 }
 
+void reset_lcdclk(void)
+{
+       /* Disable clock and reset dcnano*/
+       pcc_clock_enable(5, DCNANO_PCC5_SLOT, false);
+       pcc_reset_peripheral(5, DCNANO_PCC5_SLOT, true);
+}
+
 void mxs_set_lcdclk(u32 base_addr, u32 freq_in_khz)
 {
        u8 pcd, best_pcd = 0;