mmc: zynq_sdhci: Use set_control_reg from sdhci.c

Since set_control_reg is available in sdhci.c, use it and remove
arasan_sdhci_set_control_reg().

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 4a877b4ce8c817c8e95ab926d063e70274e94b7d..c94825dceb9b7f7fb7b35f33441935de353e66d5 100644 (file)
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -690,29 +690,10 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
                                 "clk-phase-mmc-hs400");
 }
 
-static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
-{
-       struct mmc *mmc = (struct mmc *)host->mmc;
-       u32 reg;
-
-       if (!IS_SD(mmc))
-               return;
-
-       if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
-               reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-               reg |= SDHCI_CTRL_VDD_180;
-               sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
-       }
-
-       if (mmc->selected_mode > SD_HS &&
-           mmc->selected_mode <= MMC_HS_200)
-               sdhci_set_uhs_timing(host);
-}
-
 static const struct sdhci_ops arasan_ops = {
        .platform_execute_tuning        = &arasan_sdhci_execute_tuning,
        .set_delay = &arasan_sdhci_set_tapdelay,
-       .set_control_reg = &arasan_sdhci_set_control_reg,
+       .set_control_reg = &sdhci_set_control_reg,
 };
 #endif