phy: nop-phy: Enable reset-gpios support

Some usb-nop-xceiv devices use a gpio take them out
of reset.  Add a reset function to put them into that
state.  This is similar to how Linux handles the
usb-nop-xceiv driver.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/drivers/phy/nop-phy.c b/drivers/phy/nop-phy.c
index 9f12ebc0624fea97533213c9ed4d13a20a1f1a3a..b08eedd4d42f8a3600d5136862e8ce74abf5a134 100644 (file)
--- a/drivers/phy/nop-phy.c
+++ b/drivers/phy/nop-phy.c
@@ -10,25 +10,54 @@
 #include <dm/device.h>
 #include <dm/device_compat.h>
 #include <generic-phy.h>
+#include <asm-generic/gpio.h>
 
 struct nop_phy_priv {
        struct clk_bulk bulk;
+#if CONFIG_IS_ENABLED(DM_GPIO)
+       struct gpio_desc reset_gpio;
+#endif
 };
 
+#if CONFIG_IS_ENABLED(DM_GPIO)
+static int nop_phy_reset(struct phy *phy)
+{
+       struct nop_phy_priv *priv = dev_get_priv(phy->dev);
+
+       /* Return if there is no gpio since it's optional */
+       if (!dm_gpio_is_valid(&priv->reset_gpio))
+               return 0;
+
+       return dm_gpio_set_value(&priv->reset_gpio, false);
+}
+#endif
+
 static int nop_phy_init(struct phy *phy)
 {
        struct nop_phy_priv *priv = dev_get_priv(phy->dev);
+       int ret = 0;
 
-       if (CONFIG_IS_ENABLED(CLK))
-               return clk_enable_bulk(&priv->bulk);
+       if (CONFIG_IS_ENABLED(CLK)) {
+               ret = clk_enable_bulk(&priv->bulk);
+               if (ret)
+                       return ret;
+       }
 
+#if CONFIG_IS_ENABLED(DM_GPIO)
+       ret = nop_phy_reset(phy);
+       if (ret) {
+               if (CONFIG_IS_ENABLED(CLK))
+                       clk_disable_bulk(&priv->bulk);
+               return ret;
+       }
+#endif
        return 0;
 }
 
 static int nop_phy_probe(struct udevice *dev)
 {
        struct nop_phy_priv *priv = dev_get_priv(dev);
-       int ret;
+       int ret = 0;
 
        if (CONFIG_IS_ENABLED(CLK)) {
                ret = clk_get_bulk(dev, &priv->bulk);
@@ -37,6 +66,13 @@ static int nop_phy_probe(struct udevice *dev)
                        return ret;
                }
        }
+#if CONFIG_IS_ENABLED(DM_GPIO)
+       ret = gpio_request_by_name(dev, "reset-gpios", 0,
+                                  &priv->reset_gpio,
+                                  GPIOD_IS_OUT);
+#endif
+       if (ret != -ENOENT)
+               return ret;
 
        return 0;
 }
@@ -49,6 +85,9 @@ static const struct udevice_id nop_phy_ids[] = {
 
 static struct phy_ops nop_phy_ops = {
        .init = nop_phy_init,
+#if CONFIG_IS_ENABLED(DM_GPIO)
+       .reset = nop_phy_reset,
+#endif
 };
 
 U_BOOT_DRIVER(nop_phy) = {