pci: imx: Factor out hard-coded register base addresses

Pull out hard-coded register base addresses into driver private
structure in preparation for DM conversion. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
index fcc4ab713923aec381fc97cf053e54f17101205d..173636f48e2c81efdcc1ffb4620fcf2997109d07 100644 (file)
--- a/drivers/pci/pcie_imx.c
+++ b/drivers/pci/pcie_imx.c
@@ -92,6 +92,18 @@
 #define PCIE_ATU_FUNC(x)               (((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET          0x91C
 
+struct imx_pcie_priv {
+       void __iomem            *dbi_base;
+       void __iomem            *cfg_base;
+};
+
+static struct imx_pcie_priv imx_pcie_priv = {
+       .dbi_base       = (void __iomem *)MX6_DBI_ADDR,
+       .cfg_base       = (void __iomem *)MX6_ROOT_ADDR,
+};
+
+static struct imx_pcie_priv *priv = &imx_pcie_priv;
+
 /*
  * PHY access functions
  */
@@ -231,7 +243,7 @@ static int imx6_pcie_link_up(void)
        int rx_valid, temp;
 
        /* link is debug bit 36, debug register 1 starts at bit 32 */
-       rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1);
+       rc = readl(priv->dbi_base + PCIE_PHY_DEBUG_R1);
        if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) &&
            !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))
                return -EAGAIN;
@@ -243,8 +255,8 @@ static int imx6_pcie_link_up(void)
         * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
         * to gen2 is stuck
         */
-       pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
-       ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F;
+       pcie_phy_read(priv->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
+       ltssm = readl(priv->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
 
        if (rx_valid & 0x01)
                return 0;
@@ -254,15 +266,15 @@ static int imx6_pcie_link_up(void)
 
        printf("transition to gen2 is stuck, reset PHY!\n");
 
-       pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
+       pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
        temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-       pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
+       pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp);
 
        udelay(3000);
 
-       pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
+       pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
        temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-       pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
+       pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp);
 
        return 0;
 }
@@ -285,24 +297,25 @@ static int imx_pcie_regions_setup(void)
         */
 
        /* CMD reg:I/O space, MEM space, and Bus Master Enable */
-       setbits_le32(MX6_DBI_ADDR | PCI_COMMAND,
+       setbits_le32(priv->dbi_base + PCI_COMMAND,
                     PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 
        /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
-       setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION,
+       setbits_le32(priv->dbi_base + PCI_CLASS_REVISION,
                     PCI_CLASS_BRIDGE_PCI << 16);
 
        /* Region #0 is used for Outbound CFG space access. */
-       writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
+       writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT);
 
-       writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE);
-       writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE);
-       writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT);
+       writel((u32)priv->cfg_base, priv->dbi_base + PCIE_ATU_LOWER_BASE);
+       writel(0, priv->dbi_base + PCIE_ATU_UPPER_BASE);
+       writel((u32)priv->cfg_base + MX6_ROOT_SIZE,
+              priv->dbi_base + PCIE_ATU_LIMIT);
 
-       writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
-       writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET);
-       writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
-       writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2);
+       writel(0, priv->dbi_base + PCIE_ATU_LOWER_TARGET);
+       writel(0, priv->dbi_base + PCIE_ATU_UPPER_TARGET);
+       writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1);
+       writel(PCIE_ATU_ENABLE, priv->dbi_base + PCIE_ATU_CR2);
 
        return 0;
 }
@@ -315,18 +328,18 @@ static uint32_t get_bus_address(pci_dev_t d, int where)
        uint32_t va_address;
 
        /* Reconfigure Region #0 */
-       writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
+       writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT);
 
        if (PCI_BUS(d) < 2)
-               writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
+               writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1);
        else
-               writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1);
+               writel(PCIE_ATU_TYPE_CFG1, priv->dbi_base + PCIE_ATU_CR1);
 
        if (PCI_BUS(d) == 0) {
-               va_address = MX6_DBI_ADDR;
+               va_address = (u32)priv->dbi_base;
        } else {
-               writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
-               va_address = MX6_IO_ADDR + SZ_16M - SZ_1M;
+               writel(d << 8, priv->dbi_base + PCIE_ATU_LOWER_TARGET);
+               va_address = (u32)priv->cfg_base;
        }
 
        va_address += (where & ~0x3);
@@ -465,12 +478,12 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot)
                gpr12 = readl(&iomuxc_regs->gpr[12]);
                if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) &&
                    (gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) {
-                       val = readl(MX6_DBI_ADDR + PCIE_PL_PFLR);
+                       val = readl(priv->dbi_base + PCIE_PL_PFLR);
                        val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
                        val |= PCIE_PL_PFLR_FORCE_LINK;
 
                        imx_pcie_fix_dabt_handler(true);
-                       writel(val, MX6_DBI_ADDR + PCIE_PL_PFLR);
+                       writel(val, priv->dbi_base + PCIE_PL_PFLR);
                        imx_pcie_fix_dabt_handler(false);
 
                        gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2;
@@ -621,9 +634,9 @@ static int imx_pcie_link_up(void)
         * Force the PCIe RC subordinate to 0xff, otherwise no downstream
         * devices will be detected if the enumeration is applied strictly.
         */
-       tmp = readl(MX6_DBI_ADDR + 0x18);
+       tmp = readl(priv->dbi_base + 0x18);
        tmp |= (0xff << 16);
-       writel(tmp, MX6_DBI_ADDR + 0x18);
+       writel(tmp, priv->dbi_base + 0x18);
 
        /*
         * FIXME: Force the PCIe RC to Gen1 operation
@@ -631,10 +644,10 @@ static int imx_pcie_link_up(void)
         * up, otherwise no downstream devices are detected. After the
         * link is up, a managed Gen1->Gen2 transition can be initiated.
         */
-       tmp = readl(MX6_DBI_ADDR + 0x7c);
+       tmp = readl(priv->dbi_base + 0x7c);
        tmp &= ~0xf;
        tmp |= 0x1;
-       writel(tmp, MX6_DBI_ADDR + 0x7c);
+       writel(tmp, priv->dbi_base + 0x7c);
 
        /* LTSSM enable, starting link. */
        setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
@@ -647,8 +660,8 @@ static int imx_pcie_link_up(void)
                        puts("PCI:   pcie phy link never came up\n");
 #endif
                        debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-                             readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0),
-                             readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1));
+                             readl(priv->dbi_base + PCIE_PHY_DEBUG_R0),
+                             readl(priv->dbi_base + PCIE_PHY_DEBUG_R1));
                        return -EINVAL;
                }
        }