configs: Add sam9x60ek_nandflash_defconfig

Boot from nand flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

diff --git a/board/atmel/sam9x60ek/MAINTAINERS b/board/atmel/sam9x60ek/MAINTAINERS
index e8c1346863a3a52f8a068cd407e71b163aa32ad9..ec5bed7479ba211ab20ea56f979a569de1bfd22e 100644 (file)
--- a/board/atmel/sam9x60ek/MAINTAINERS
+++ b/board/atmel/sam9x60ek/MAINTAINERS
@@ -5,3 +5,4 @@ S:      Maintained
 F:     board/atmel/sam9x60ek/
 F:     include/configs/sam9x60ek.h
 F:     configs/sam9x60ek_mmc_defconfig
+F:     configs/sam9x60ek_nandflash_defconfig

diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
new file mode 100644 (file)
index 0000000..948d7c7
--- /dev/null
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_TARGET_SAM9X60EK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y