phy: marvell: rename comphy related definitions to COMPHY_XX

Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX.
Those definition might be confused with MDIO PHY definitions.

This patch does the following changes:
 - PHY_TYPE_XX --> COMPHY_TYPE_XX
 - PHY_SPEED_XX --> COMPHY_SPEED_XX

This improves readability, no functional change.

Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 1b1b66b94de689d4ae722d0061bd77f6080de445..42e7ddd25c5509d8e5fc57f77fd1d80f45fb59e8 100644 (file)
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -70,13 +70,13 @@
 
 &comphy {
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
-               phy-speed = <PHY_SPEED_2_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_PEX0>;
+               phy-speed = <COMPHY_SPEED_2_5G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 96a4b3d95b887300f3a2064dba8329867e1e377b..d86d8f0b63cf52ac48681d90aa2ab63bc35045a3 100644 (file)
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -83,18 +83,18 @@
 &comphy {
        max-lanes = <3>;
        phy0 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_PEX0>;
-               phy-speed = <PHY_SPEED_2_5G>;
+               phy-type = <COMPHY_TYPE_PEX0>;
+               phy-speed = <COMPHY_SPEED_2_5G>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_SATA0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_SATA0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index 974270cc8c6820f8b05825450304484a8067b92f..8e0ebf508d4483f229e2ba222d60f934e0ce781c 100644 (file)
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -73,18 +73,18 @@
 &comphy {
        max-lanes = <3>;
        phy0 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_PEX0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_PEX0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 7f4b8222f4afdf506fe493173f82c0592dfca7c8..4b30f3cea8c7110b806008460907647e86826be7 100644 (file)
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -108,18 +108,19 @@
 
 &comphy {
        phy0 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
+       };
+
+       phy1 {
+               phy-type = <COMPHY_TYPE_SGMII0>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
+       };
+
+       phy2 {
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
-        phy1 {
-                phy-type = <PHY_TYPE_SGMII0>;
-                phy-speed = <PHY_SPEED_3_125G>;
-        };
-
-        phy2 {
-                phy-type = <PHY_TYPE_USB3_HOST1>;
-                phy-speed = <PHY_SPEED_5G>;
-        };
 };
 
 &eth0 {

diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
index f249c71f6561bdbebc4eb243c0d45075d36b06b6..ccf470b317f1ab4ae3f7daa62f565f58f4012ca2 100644 (file)
--- a/arch/arm/dts/armada-7040-db-nand.dts
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -129,33 +129,33 @@
 
 &cp0_comphy {
        phy0 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_SGMII0>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII0>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
 
        phy3 {
-               phy-type = <PHY_TYPE_SATA1>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_SATA1>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy4 {
-               phy-type = <PHY_TYPE_USB3_HOST1>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy5 {
-               phy-type = <PHY_TYPE_PEX2>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_PEX2>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 6037f12f0e9ffc621b80636f5c99a2b366a1ad2b..f475fb36107106e86d95b316367e4e11623bf13d 100644 (file)
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -122,32 +122,32 @@
 
 &cp0_comphy {
        phy0 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
 
        phy3 {
-               phy-type = <PHY_TYPE_SATA1>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_SATA1>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy4 {
-               phy-type = <PHY_TYPE_USB3_HOST1>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 
        phy5 {
-               phy-type = <PHY_TYPE_PEX2>;
-               phy-speed = <PHY_SPEED_5G>;
+               phy-type = <COMPHY_TYPE_PEX2>;
+               phy-speed = <COMPHY_SPEED_5G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
index 86df6ac0b202c49dd8481b57eb99225689c61467..ce5832c2fbd742eb16d75bc4c242a881bc7d6327 100644 (file)
--- a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -160,22 +160,22 @@
         * Lane 5: Not connected
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_UNCONNECTED>;
+               phy-type = <COMPHY_TYPE_UNCONNECTED>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_UNCONNECTED>;
+               phy-type = <COMPHY_TYPE_UNCONNECTED>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_USB3_HOST1>;
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_UNCONNECTED>;
+               phy-type = <COMPHY_TYPE_UNCONNECTED>;
        };
 };
 
@@ -272,25 +272,25 @@
         * Lane 5: SGMII2 - Connected to Topaz switch
         */
        phy0 {
-               phy-type = <PHY_TYPE_SATA1>;
-               phy-invert = <PHY_POLARITY_RXD_INVERT>;
+               phy-type = <COMPHY_TYPE_SATA1>;
+               phy-invert = <COMPHY_POLARITY_RXD_INVERT>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_UNCONNECTED>;
+               phy-type = <COMPHY_TYPE_UNCONNECTED>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_UNCONNECTED>;
+               phy-type = <COMPHY_TYPE_UNCONNECTED>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 };
 

diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index a2b7c992a406485b12659e0a0f679c260a7bff33..1edfaab682ebbcbf63593b2a5bbecbb290afa83e 100644 (file)
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -89,22 +89,22 @@
         *      Lane 5: PCIe2 (x1)
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_SATA0>;
+               phy-type = <COMPHY_TYPE_SATA0>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SATA1>;
+               phy-type = <COMPHY_TYPE_SATA1>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_USB3_HOST1>;
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_PEX2>;
+               phy-type = <COMPHY_TYPE_PEX2>;
        };
 };
 
@@ -188,22 +188,22 @@
         *      Lane 5: PCIe2 (x1)
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_SATA0>;
+               phy-type = <COMPHY_TYPE_SATA0>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SATA1>;
+               phy-type = <COMPHY_TYPE_SATA1>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_PEX1>;
+               phy-type = <COMPHY_TYPE_PEX1>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_PEX2>;
+               phy-type = <COMPHY_TYPE_PEX2>;
        };
 };
 

diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index b0a36e328bc9acfcfdbc0fb019ace2cfd596edf8..98a582df26fed9a95b468c267dd56231ed57c601 100644 (file)
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -171,22 +171,22 @@
         * Lane 5: SATA1
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_SATA1>;
+               phy-type = <COMPHY_TYPE_SATA1>;
        };
 };
 
@@ -286,22 +286,23 @@
         * Lane 5: SGMII3
         */
        phy0 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_SATA0>;
+               phy-type = <COMPHY_TYPE_SATA0>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SATA1>;
+               phy-type = <COMPHY_TYPE_SATA1>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_SGMII3>;
+               phy-type = <COMPHY_TYPE_SGMII3>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 };

diff --git a/arch/arm/dts/armada-8040-puzzle-m801.dts b/arch/arm/dts/armada-8040-puzzle-m801.dts
index ff46ce50cbc706dfafc8617eca84129dbb981fe9..0becc4ff0d34f2d1e29b4631a6401c742327632c 100644 (file)
--- a/arch/arm/dts/armada-8040-puzzle-m801.dts
+++ b/arch/arm/dts/armada-8040-puzzle-m801.dts
@@ -220,24 +220,24 @@
         * Lane 5: SATA1
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_SATA0>;
+               phy-type = <COMPHY_TYPE_SATA0>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_SATA1>;
+               phy-type = <COMPHY_TYPE_SATA1>;
        };
 };
 
@@ -367,23 +367,23 @@
         * Lane 5: SGMII2
         */
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy1 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
        phy2 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
        };
        phy3 {
-               phy-type = <PHY_TYPE_SGMII1>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII1>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
+               phy-type = <COMPHY_TYPE_SFI>;
        };
        phy5 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_1_25G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_1_25G>;
        };
 };

diff --git a/arch/arm/dts/cn9130-crb-A.dts b/arch/arm/dts/cn9130-crb-A.dts
index fa21ef314cbae5981561add804898430aa5b93d9..5c5e0fb2eb1e5386ad12d304a162cfab94890e5d 100644 (file)
--- a/arch/arm/dts/cn9130-crb-A.dts
+++ b/arch/arm/dts/cn9130-crb-A.dts
@@ -15,29 +15,29 @@
 
 &cp0_comphy {
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
 
        phy3 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
 
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
-               phy-speed = <PHY_SPEED_10_3125G>;
+               phy-type = <COMPHY_TYPE_SFI>;
+               phy-speed = <COMPHY_SPEED_10_3125G>;
        };
 
        phy5 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 };
 

diff --git a/arch/arm/dts/cn9130-crb-B.dts b/arch/arm/dts/cn9130-crb-B.dts
index 7cb587ada826135b544c133350023db129e7c0c0..6041084a2c876106f941db251bafa3414606ffa2 100644 (file)
--- a/arch/arm/dts/cn9130-crb-B.dts
+++ b/arch/arm/dts/cn9130-crb-B.dts
@@ -15,29 +15,29 @@
 
 &cp0_comphy {
        phy0 {
-               phy-type = <PHY_TYPE_PEX0>;
+               phy-type = <COMPHY_TYPE_PEX0>;
        };
 
        phy1 {
-               phy-type = <PHY_TYPE_USB3_HOST0>;
+               phy-type = <COMPHY_TYPE_USB3_HOST0>;
        };
 
        phy2 {
-               phy-type = <PHY_TYPE_SATA0>;
+               phy-type = <COMPHY_TYPE_SATA0>;
        };
 
        phy3 {
-               phy-type = <PHY_TYPE_USB3_HOST1>;
+               phy-type = <COMPHY_TYPE_USB3_HOST1>;
        };
 
        phy4 {
-               phy-type = <PHY_TYPE_SFI>;
-               phy-speed = <PHY_SPEED_10_3125G>;
+               phy-type = <COMPHY_TYPE_SFI>;
+               phy-speed = <COMPHY_SPEED_10_3125G>;
        };
 
        phy5 {
-               phy-type = <PHY_TYPE_SGMII2>;
-               phy-speed = <PHY_SPEED_3_125G>;
+               phy-type = <COMPHY_TYPE_SGMII2>;
+               phy-speed = <COMPHY_SPEED_3_125G>;
        };
 };
 

diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 486680a49e882806f5043da51868772f8c516647..15cbf92550e69e8411e4a52931b1d3d7a3bcb21a 100644 (file)
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -216,13 +216,13 @@ int comphy_update_map(struct comphy_map *serdes_map, int count)
 
        if (sfpindex >= 0 && swindex >= 0) {
                if (sfpindex < swindex)
-                       serdes_map[0].speed = PHY_SPEED_1_25G;
+                       serdes_map[0].speed = COMPHY_SPEED_1_25G;
                else
-                       serdes_map[0].speed = PHY_SPEED_3_125G;
+                       serdes_map[0].speed = COMPHY_SPEED_3_125G;
        } else if (sfpindex >= 0) {
-               serdes_map[0].speed = PHY_SPEED_1_25G;
+               serdes_map[0].speed = COMPHY_SPEED_1_25G;
        } else if (swindex >= 0) {
-               serdes_map[0].speed = PHY_SPEED_3_125G;
+               serdes_map[0].speed = COMPHY_SPEED_3_125G;
        }
 
        return 0;

diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 12523d18a80556d4bcca36f73e2e129fdf3bdcf5..06822d1d12e0829d9f8ae8af2af579faffb16a9d 100644 (file)
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -17,33 +17,33 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct comphy_mux_data a3700_comphy_mux_data[] = {
-/* Lane 0 */
+       /* Lane 0 */
        {
                4,
                {
-                       { PHY_TYPE_UNCONNECTED, 0x0 },
-                       { PHY_TYPE_SGMII1,      0x0 },
-                       { PHY_TYPE_USB3_HOST0,  0x1 },
-                       { PHY_TYPE_USB3_DEVICE, 0x1 }
+                       { COMPHY_TYPE_UNCONNECTED,      0x0 },
+                       { COMPHY_TYPE_SGMII1,   0x0 },
+                       { COMPHY_TYPE_USB3_HOST0,       0x1 },
+                       { COMPHY_TYPE_USB3_DEVICE,      0x1 }
                }
        },
-/* Lane 1 */
+       /* Lane 1 */
        {
                3,
                {
-                       { PHY_TYPE_UNCONNECTED, 0x0},
-                       { PHY_TYPE_SGMII0,      0x0},
-                       { PHY_TYPE_PEX0,        0x1}
+                       { COMPHY_TYPE_UNCONNECTED,      0x0},
+                       { COMPHY_TYPE_SGMII0,   0x0},
+                       { COMPHY_TYPE_PEX0,     0x1}
                }
        },
-/* Lane 2 */
+       /* Lane 2 */
        {
                4,
                {
-                       { PHY_TYPE_UNCONNECTED, 0x0},
-                       { PHY_TYPE_SATA0,       0x0},
-                       { PHY_TYPE_USB3_HOST0,  0x1},
-                       { PHY_TYPE_USB3_DEVICE, 0x1}
+                       { COMPHY_TYPE_UNCONNECTED,      0x0},
+                       { COMPHY_TYPE_SATA0,    0x0},
+                       { COMPHY_TYPE_USB3_HOST0,       0x1},
+                       { COMPHY_TYPE_USB3_DEVICE,      0x1}
                }
        },
 };
@@ -228,10 +228,10 @@ static int comphy_pcie_power_up(u32 speed, u32 invert)
        /*
         * 10. Check the Polarity invert bit
         */
-       if (invert & PHY_POLARITY_TXD_INVERT)
+       if (invert & COMPHY_POLARITY_TXD_INVERT)
                reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_txd_inv, 0);
 
-       if (invert & PHY_POLARITY_RXD_INVERT)
+       if (invert & COMPHY_POLARITY_RXD_INVERT)
                reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_rxd_inv, 0);
 
        /*
@@ -284,10 +284,10 @@ static int comphy_sata_power_up(u32 invert)
        /*
         * 0. Check the Polarity invert bits
         */
-       if (invert & PHY_POLARITY_TXD_INVERT)
+       if (invert & COMPHY_POLARITY_TXD_INVERT)
                data |= bs_txd_inv;
 
-       if (invert & PHY_POLARITY_RXD_INVERT)
+       if (invert & COMPHY_POLARITY_RXD_INVERT)
                data |= bs_rxd_inv;
 
        reg_set_indirect(vphy_sync_pattern_reg, data, bs_txd_inv | bs_rxd_inv);
@@ -465,10 +465,10 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
        /*
         * 9. Check the Polarity invert bit
         */
-       if (invert & PHY_POLARITY_TXD_INVERT)
+       if (invert & COMPHY_POLARITY_TXD_INVERT)
                usb3_reg_set16(SYNC_PATTERN, phy_txd_inv, 0, lane);
 
-       if (invert & PHY_POLARITY_RXD_INVERT)
+       if (invert & COMPHY_POLARITY_RXD_INVERT)
                usb3_reg_set16(SYNC_PATTERN, phy_rxd_inv, 0, lane);
 
        /*
@@ -513,7 +513,7 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
         * Set Soft ID for Host mode (Device mode works with Hard ID
         * detection)
         */
-       if (type == PHY_TYPE_USB3_HOST0) {
+       if (type == COMPHY_TYPE_USB3_HOST0) {
                /*
                 * set   BIT0: set ID_MODE of Host/Device = "Soft ID" (BIT1)
                 * clear BIT1: set SOFT_ID = Host
@@ -685,8 +685,8 @@ static void comphy_sgmii_phy_init(u32 lane, u32 speed)
                 * comparison to 3.125 Gbps values. These register values are
                 * stored in "sgmii_phy_init_fix" array.
                 */
-               if ((speed != PHY_SPEED_1_25G) &&
-                   (sgmii_phy_init_fix[fix_idx].addr == addr)) {
+               if (speed != COMPHY_SPEED_1_25G &&
+                   sgmii_phy_init_fix[fix_idx].addr == addr) {
                        /* Use new value */
                        val = sgmii_phy_init_fix[fix_idx].value;
                        if (fix_idx < fix_arr_sz)
@@ -737,13 +737,13 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
         * 7. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide
         *    COMPHY bit rate
         */
-       if (speed == PHY_SPEED_3_125G) { /* 3.125 GHz */
+       if (speed == COMPHY_SPEED_3_125G) { /* 3.125 GHz */
                reg_set(COMPHY_PHY_CFG1_ADDR(lane),
                        (0x8 << rf_gen_rx_sel_shift) |
                        (0x8 << rf_gen_tx_sel_shift),
                        rf_gen_rx_select | rf_gen_tx_select);
 
-       } else if (speed == PHY_SPEED_1_25G) { /* 1.25 GHz */
+       } else if (speed == COMPHY_SPEED_1_25G) { /* 1.25 GHz */
                reg_set(COMPHY_PHY_CFG1_ADDR(lane),
                        (0x6 << rf_gen_rx_sel_shift) |
                        (0x6 << rf_gen_tx_sel_shift),
@@ -819,7 +819,7 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
         *     registers are OK.
         */
        debug("Running C-DPI phy init %s mode\n",
-             speed == PHY_SPEED_3_125G ? "2G5" : "1G");
+             speed == COMPHY_SPEED_3_125G ? "2G5" : "1G");
        if (get_ref_clk() == 40)
                comphy_sgmii_phy_init(lane, speed);
 
@@ -837,10 +837,10 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
        /*
         * 18. Check the PHY Polarity invert bit
         */
-       if (invert & PHY_POLARITY_TXD_INVERT)
+       if (invert & COMPHY_POLARITY_TXD_INVERT)
                reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_txd_inv, 0);
 
-       if (invert & PHY_POLARITY_RXD_INVERT)
+       if (invert & COMPHY_POLARITY_RXD_INVERT)
                reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_rxd_inv, 0);
 
        /*
@@ -976,30 +976,30 @@ int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg,
                      comphy_map->type, comphy_map->invert);
 
                switch (comphy_map->type) {
-               case PHY_TYPE_UNCONNECTED:
+               case COMPHY_TYPE_UNCONNECTED:
                        continue;
                        break;
 
-               case PHY_TYPE_PEX0:
+               case COMPHY_TYPE_PEX0:
                        ret = comphy_pcie_power_up(comphy_map->speed,
                                                   comphy_map->invert);
                        break;
 
-               case PHY_TYPE_USB3_HOST0:
-               case PHY_TYPE_USB3_DEVICE:
+               case COMPHY_TYPE_USB3_HOST0:
+               case COMPHY_TYPE_USB3_DEVICE:
                        ret = comphy_usb3_power_up(lane,
                                                   comphy_map->type,
                                                   comphy_map->speed,
                                                   comphy_map->invert);
                        break;
 
-               case PHY_TYPE_SGMII0:
-               case PHY_TYPE_SGMII1:
+               case COMPHY_TYPE_SGMII0:
+               case COMPHY_TYPE_SGMII1:
                        ret = comphy_sgmii_power_up(lane, comphy_map->speed,
                                                    comphy_map->invert);
                        break;
 
-               case PHY_TYPE_SATA0:
+               case COMPHY_TYPE_SATA0:
                        ret = comphy_sata_power_up(comphy_map->invert);
                        break;
 

diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index cffceb1395bb2675aa6b61ceb0c0679daaf9fb33..f1f061d7c116ec8edef7a677da7ac614b318f3fe 100644 (file)
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -29,7 +29,7 @@ static const char *get_speed_string(u32 speed)
                "6.25 Gbps", "10.31 Gbps"
        };
 
-       if (speed < 0 || speed > PHY_SPEED_MAX)
+       if (speed < 0 || speed > COMPHY_SPEED_MAX)
                return "invalid";
 
        return speed_strings[speed];
@@ -46,7 +46,7 @@ static const char *get_type_string(u32 type)
                "RXAUI0", "RXAUI1", "SFI", "IGNORE"
        };
 
-       if (type < 0 || type > PHY_TYPE_MAX)
+       if (type < 0 || type > COMPHY_TYPE_MAX)
                return "invalid";
 
        return type_strings[type];
@@ -59,7 +59,7 @@ void comphy_print(struct chip_serdes_phy_config *chip_cfg,
 
        for (lane = 0; lane < chip_cfg->comphy_lanes_count;
             lane++, comphy_map_data++) {
-               if (comphy_map_data->speed == PHY_SPEED_INVALID) {
+               if (comphy_map_data->speed == COMPHY_SPEED_INVALID) {
                        printf("Comphy-%d: %-13s\n", lane,
                               get_type_string(comphy_map_data->type));
                } else {
@@ -136,16 +136,16 @@ static int comphy_probe(struct udevice *dev)
                        continue;
 
                comphy_map_data[lane].speed = fdtdec_get_int(
-                       blob, subnode, "phy-speed", PHY_TYPE_INVALID);
+                       blob, subnode, "phy-speed", COMPHY_TYPE_INVALID);
                comphy_map_data[lane].type = fdtdec_get_int(
-                       blob, subnode, "phy-type", PHY_SPEED_INVALID);
+                       blob, subnode, "phy-type", COMPHY_SPEED_INVALID);
                comphy_map_data[lane].invert = fdtdec_get_int(
-                       blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT);
+                       blob, subnode, "phy-invert", COMPHY_POLARITY_NO_INVERT);
                comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode,
                                                                "clk-src");
                comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode,
                                                                  "end_point");
-               if (comphy_map_data[lane].type == PHY_TYPE_INVALID) {
+               if (comphy_map_data[lane].type == COMPHY_TYPE_INVALID) {
                        printf("no phy type for lane %d, setting lane as unconnected\n",
                               lane + 1);
                }

diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index a323de7c76d0f1c12bf3414bc5825b43fb2a78dd..e4ab90121c74916ce2868d4587d5494f83c310c4 100644 (file)
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -74,35 +74,47 @@ struct utmi_phy_data {
  * Eth_port_0 that include (SGMII0, RXAUI0, SFI)
  */
 struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
-       {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */
-            {PHY_TYPE_SATA1, 0x4} } },
-       {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 1 */
-            {PHY_TYPE_SATA0, 0x4} } },
-       {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */
-            {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1},
-            {PHY_TYPE_SATA0, 0x4} } },
-       {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */
-            {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
-       {7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
-            {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2},
-            {PHY_TYPE_SGMII1, 0x1} } },
-       {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */
-            {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
+       /* Lane 0 */
+       {4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII1, 0x1},
+            {COMPHY_TYPE_SATA1, 0x4} } },
+       /* Lane 1 */
+       {4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+            {COMPHY_TYPE_SATA0, 0x4} } },
+       /* Lane 2 */
+       {6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x1},
+            {COMPHY_TYPE_RXAUI0, 0x1}, {COMPHY_TYPE_SFI, 0x1},
+            {COMPHY_TYPE_SATA0, 0x4} } },
+       /* Lane 3 */
+       {8, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_RXAUI1, 0x1},
+            {COMPHY_TYPE_SGMII1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
+       /* Lane 4 */
+       {7, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x2},
+            {COMPHY_TYPE_RXAUI0, 0x2}, {COMPHY_TYPE_SFI, 0x2},
+            {COMPHY_TYPE_SGMII1, 0x1} } },
+       /* Lane 5 */
+       {6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+            {COMPHY_TYPE_RXAUI1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
 };
 
 struct comphy_mux_data cp110_comphy_pipe_mux_data[] = {
-       {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX0, 0x4} } }, /* Lane 0 */
-       {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 1 */
-            {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_USB3_DEVICE, 0x2},
-            {PHY_TYPE_PEX0, 0x4} } },
-       {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 2 */
-            {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
-       {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 3 */
-            {PHY_TYPE_USB3_HOST1, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
-       {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 4 */
-            {PHY_TYPE_USB3_HOST1, 0x1},
-            {PHY_TYPE_USB3_DEVICE, 0x2}, {PHY_TYPE_PEX1, 0x4} } },
-       {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX2, 0x4} } }, /* Lane 5 */
+       /* Lane 0 */
+       {2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX0, 0x4} } },
+       /* Lane 1 */
+       {4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+            {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_USB3_DEVICE, 0x2},
+            {COMPHY_TYPE_PEX0, 0x4} } },
+       /* Lane 2 */
+       {3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+            {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+       /* Lane 3 */
+       {3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+            {COMPHY_TYPE_USB3_HOST1, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+       /* Lane 4 */
+       {4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+            {COMPHY_TYPE_USB3_HOST1, 0x1},
+            {COMPHY_TYPE_USB3_DEVICE, 0x2}, {COMPHY_TYPE_PEX1, 0x4} } },
+       /* Lane 5 */
+       {2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX2, 0x4} } },
 };
 
 static u32 polling_with_timeout(void __iomem *addr, u32 val,
@@ -868,9 +880,9 @@ static void comphy_mux_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                        comphy_base_addr + COMMON_SELECTOR_PIPE_OFFSET);
        /* Fix the type after check the PHY and PIPE configuration */
        for (lane = 0; lane < comphy_max_count; lane++) {
-               if ((comphy_map_pipe_data[lane].type == PHY_TYPE_UNCONNECTED) &&
-                   (comphy_map_phy_data[lane].type == PHY_TYPE_UNCONNECTED))
-                       serdes_map[lane].type = PHY_TYPE_UNCONNECTED;
+               if ((comphy_map_pipe_data[lane].type == COMPHY_TYPE_UNCONNECTED) &&
+                   (comphy_map_phy_data[lane].type == COMPHY_TYPE_UNCONNECTED))
+                       serdes_map[lane].type = COMPHY_TYPE_UNCONNECTED;
        }
 }
 
@@ -895,7 +907,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
        /* Check if the first 4 lanes configured as By-4 */
        for (lane = 0, ptr_comphy_map = serdes_map; lane < 4;
             lane++, ptr_comphy_map++) {
-               if (ptr_comphy_map->type != PHY_TYPE_PEX0)
+               if (ptr_comphy_map->type != COMPHY_TYPE_PEX0)
                        break;
                pcie_width++;
        }
@@ -912,14 +924,14 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                        pcie_width = 1;
                }
                switch (ptr_comphy_map->type) {
-               case PHY_TYPE_UNCONNECTED:
-               case PHY_TYPE_IGNORE:
+               case COMPHY_TYPE_UNCONNECTED:
+               case COMPHY_TYPE_IGNORE:
                        continue;
                        break;
-               case PHY_TYPE_PEX0:
-               case PHY_TYPE_PEX1:
-               case PHY_TYPE_PEX2:
-               case PHY_TYPE_PEX3:
+               case COMPHY_TYPE_PEX0:
+               case COMPHY_TYPE_PEX1:
+               case COMPHY_TYPE_PEX2:
+               case COMPHY_TYPE_PEX3:
                        mode = COMPHY_FW_PCIE_FORMAT(pcie_width,
                                                     ptr_comphy_map->clk_src,
                                                     COMPHY_PCIE_MODE,
@@ -928,30 +940,30 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                                         ptr_chip_cfg->comphy_base_addr, lane,
                                         mode);
                        break;
-               case PHY_TYPE_SATA0:
-               case PHY_TYPE_SATA1:
-               case PHY_TYPE_SATA2:
-               case PHY_TYPE_SATA3:
+               case COMPHY_TYPE_SATA0:
+               case COMPHY_TYPE_SATA1:
+               case COMPHY_TYPE_SATA2:
+               case COMPHY_TYPE_SATA3:
                        mode =  COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE);
                        ret = comphy_sata_power_up(lane, hpipe_base_addr,
                                                   comphy_base_addr,
                                                   ptr_chip_cfg->cp_index,
                                                   mode);
                        break;
-               case PHY_TYPE_USB3_HOST0:
-               case PHY_TYPE_USB3_HOST1:
-               case PHY_TYPE_USB3_DEVICE:
+               case COMPHY_TYPE_USB3_HOST0:
+               case COMPHY_TYPE_USB3_HOST1:
+               case COMPHY_TYPE_USB3_DEVICE:
                        ret = comphy_usb3_power_up(lane, hpipe_base_addr,
                                                   comphy_base_addr);
                        break;
-               case PHY_TYPE_SGMII0:
-               case PHY_TYPE_SGMII1:
-                       if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+               case COMPHY_TYPE_SGMII0:
+               case COMPHY_TYPE_SGMII1:
+                       if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
                                debug("Warning: ");
                                debug("SGMII PHY speed in lane %d is invalid,",
                                      lane);
                                debug(" set PHY speed to 1.25G\n");
-                               ptr_comphy_map->speed = PHY_SPEED_1_25G;
+                               ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
                        }
 
                        /*
@@ -965,12 +977,12 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                                         ptr_chip_cfg->comphy_base_addr, lane,
                                         mode);
                        break;
-               case PHY_TYPE_SGMII2:
-               case PHY_TYPE_SGMII3:
-                       if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+               case COMPHY_TYPE_SGMII2:
+               case COMPHY_TYPE_SGMII3:
+                       if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
                                debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n",
                                      lane);
-                               ptr_comphy_map->speed = PHY_SPEED_1_25G;
+                               ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
                        }
 
                        mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE,
@@ -980,7 +992,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                                         ptr_chip_cfg->comphy_base_addr, lane,
                                         mode);
                        break;
-               case PHY_TYPE_SFI:
+               case COMPHY_TYPE_SFI:
                        mode = COMPHY_FW_FORMAT(COMPHY_SFI_MODE,
                                                COMPHY_UNIT_ID0,
                                                ptr_comphy_map->speed);
@@ -988,8 +1000,8 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                                         ptr_chip_cfg->comphy_base_addr, lane,
                                         mode);
                        break;
-               case PHY_TYPE_RXAUI0:
-               case PHY_TYPE_RXAUI1:
+               case COMPHY_TYPE_RXAUI0:
+               case COMPHY_TYPE_RXAUI1:
                        ret = comphy_rxauii_power_up(lane, hpipe_base_addr,
                                                     comphy_base_addr);
                        break;
@@ -1001,9 +1013,9 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
                if (ret == 0) {
                        /*
                         * If interface wans't initialized, set the lane to
-                        * PHY_TYPE_UNCONNECTED state.
+                        * COMPHY_TYPE_UNCONNECTED state.
                         */
-                       ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
+                       ptr_comphy_map->type = COMPHY_TYPE_UNCONNECTED;
                        pr_err("PLL is not locked - Failed to initialize lane %d\n",
                              lane);
                }

diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c
index 98327557a89980a65ab9555a73434bc04e6db54f..aaef736b75ddd411a8d41e70f0b0e29a30afee0c 100644 (file)
--- a/drivers/phy/marvell/comphy_mux.c
+++ b/drivers/phy/marvell/comphy_mux.c
@@ -15,7 +15,7 @@
  * description: this function passes over the COMPHY lanes and check if the type
  *              is valid for specific lane. If the type is not valid,
  *              the function update the struct and set the type of the lane as
- *              PHY_TYPE_UNCONNECTED
+ *              COMPHY_TYPE_UNCONNECTED
  */
 static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
                struct comphy_map *comphy_map_data, int comphy_max_lanes)
@@ -28,7 +28,7 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
        for (lane = 0; lane < comphy_max_lanes;
             lane++, comphy_map_data++, mux_data++) {
                /* Don't check ignored COMPHYs */
-               if (comphy_map_data->type == PHY_TYPE_IGNORE)
+               if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
                        continue;
 
                mux_opt = mux_data->mux_values;
@@ -43,8 +43,8 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
                        debug("lane number %d, had invalid type %d\n",
                              lane, comphy_map_data->type);
                        debug("set lane %d as type %d\n", lane,
-                             PHY_TYPE_UNCONNECTED);
-                       comphy_map_data->type = PHY_TYPE_UNCONNECTED;
+                             COMPHY_TYPE_UNCONNECTED);
+                       comphy_map_data->type = COMPHY_TYPE_UNCONNECTED;
                } else {
                        debug("lane number %d, has type %d\n",
                              lane, comphy_map_data->type);
@@ -88,7 +88,7 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data,
 
        for (lane = 0; lane < comphy_max_lanes;
             lane++, comphy_map_data++, mux_data++) {
-               if (comphy_map_data->type == PHY_TYPE_IGNORE)
+               if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
                        continue;
 
                /*

diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index 08544fa758bfd3f290a2d386e299442b0d32af21..7d62dcf7fa51c90c7202d4e31a1273df04e6ece4 100644 (file)
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -6,53 +6,53 @@
 #ifndef _COMPHY_DATA_H_
 #define _COMPHY_DATA_H_
 
-#define PHY_SPEED_1_25G                        0
-#define PHY_SPEED_1_5G                 1
-#define PHY_SPEED_2_5G                 2
-#define PHY_SPEED_3G                   3
-#define PHY_SPEED_3_125G               4
-#define PHY_SPEED_5G                   5
-#define PHY_SPEED_5_15625G             6
-#define PHY_SPEED_6G                   7
-#define PHY_SPEED_6_25G                        8
-#define PHY_SPEED_10_3125G             9
-#define PHY_SPEED_MAX                  10
-#define PHY_SPEED_INVALID              0xff
+#define COMPHY_SPEED_1_25G             0
+#define COMPHY_SPEED_1_5G              1
+#define COMPHY_SPEED_2_5G              2
+#define COMPHY_SPEED_3G                        3
+#define COMPHY_SPEED_3_125G            4
+#define COMPHY_SPEED_5G                        5
+#define COMPHY_SPEED_5_15625G          6
+#define COMPHY_SPEED_6G                        7
+#define COMPHY_SPEED_6_25G             8
+#define COMPHY_SPEED_10_3125G          9
+#define COMPHY_SPEED_MAX               10
+#define COMPHY_SPEED_INVALID           0xff
 
-#define PHY_TYPE_UNCONNECTED           0
-#define PHY_TYPE_PEX0                  1
-#define PHY_TYPE_PEX1                  2
-#define PHY_TYPE_PEX2                  3
-#define PHY_TYPE_PEX3                  4
-#define PHY_TYPE_SATA0                 5
-#define PHY_TYPE_SATA1                 6
-#define PHY_TYPE_SATA2                 7
-#define PHY_TYPE_SATA3                 8
-#define PHY_TYPE_SGMII0                        9
-#define PHY_TYPE_SGMII1                        10
-#define PHY_TYPE_SGMII2                        11
-#define PHY_TYPE_SGMII3                        12
-#define PHY_TYPE_QSGMII                        13
-#define PHY_TYPE_USB3                  14
-#define PHY_TYPE_USB3_HOST0            15
-#define PHY_TYPE_USB3_HOST1            16
-#define PHY_TYPE_USB3_DEVICE           17
-#define PHY_TYPE_XAUI0                 18
-#define PHY_TYPE_XAUI1                 19
-#define PHY_TYPE_XAUI2                 20
-#define PHY_TYPE_XAUI3                 21
-#define PHY_TYPE_RXAUI0                        22
-#define PHY_TYPE_RXAUI1                        23
-#define PHY_TYPE_SFI                   24
-#define PHY_TYPE_IGNORE                        25
-#define PHY_TYPE_MAX                   26
-#define PHY_TYPE_INVALID               0xff
+#define COMPHY_TYPE_UNCONNECTED                0
+#define COMPHY_TYPE_PEX0               1
+#define COMPHY_TYPE_PEX1               2
+#define COMPHY_TYPE_PEX2               3
+#define COMPHY_TYPE_PEX3               4
+#define COMPHY_TYPE_SATA0              5
+#define COMPHY_TYPE_SATA1              6
+#define COMPHY_TYPE_SATA2              7
+#define COMPHY_TYPE_SATA3              8
+#define COMPHY_TYPE_SGMII0             9
+#define COMPHY_TYPE_SGMII1             10
+#define COMPHY_TYPE_SGMII2             11
+#define COMPHY_TYPE_SGMII3             12
+#define COMPHY_TYPE_QSGMII             13
+#define COMPHY_TYPE_USB3                14
+#define COMPHY_TYPE_USB3_HOST0         15
+#define COMPHY_TYPE_USB3_HOST1         16
+#define COMPHY_TYPE_USB3_DEVICE                17
+#define COMPHY_TYPE_XAUI0              18
+#define COMPHY_TYPE_XAUI1              19
+#define COMPHY_TYPE_XAUI2              20
+#define COMPHY_TYPE_XAUI3              21
+#define COMPHY_TYPE_RXAUI0             22
+#define COMPHY_TYPE_RXAUI1             23
+#define COMPHY_TYPE_SFI                        24
+#define COMPHY_TYPE_IGNORE             25
+#define COMPHY_TYPE_MAX                        26
+#define COMPHY_TYPE_INVALID            0xff
 
-#define PHY_POLARITY_NO_INVERT         0
-#define PHY_POLARITY_TXD_INVERT                1
-#define PHY_POLARITY_RXD_INVERT                2
-#define PHY_POLARITY_ALL_INVERT                \
-       (PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT)
+#define COMPHY_POLARITY_NO_INVERT      0
+#define COMPHY_POLARITY_TXD_INVERT     1
+#define COMPHY_POLARITY_RXD_INVERT     2
+#define COMPHY_POLARITY_ALL_INVERT     \
+       (COMPHY_POLARITY_TXD_INVERT | COMPHY_POLARITY_RXD_INVERT)
 
 #define UTMI_PHY_TO_USB3_HOST0         0
 #define UTMI_PHY_TO_USB3_HOST1         1