development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
-config TARGET_LS2080A_SIMU
- bool "Support ls2080a_simu"
- select ARCH_LS2080A
- select ARM64
- select ARMV8_MULTIENTRY
- select BOARD_LATE_INIT
- help
- Support for Freescale LS2080A_SIMU platform.
- The LS2080A Development System (QDS) is a pre silicon
- development platform that supports the QorIQ LS2080A
- Layerscape Architecture processor.
-
config TARGET_LS1088AQDS
bool "Support ls1088aqds"
select ARCH_LS1088A
source "board/cirrus/edb93xx/Kconfig"
source "board/eets/pdu001/Kconfig"
source "board/emulation/qemu-arm/Kconfig"
-source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/ls1088a/Kconfig"
default y
select ARM_SMCCC if OF_CONTROL
depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
- !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
+ !TARGET_LS2080AQDS && \
!TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
!TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
+++ /dev/null
-if TARGET_LS2080A_EMU
-
-config SYS_BOARD
- default "ls2080a"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
- default "ls2080a_emu"
-
-source "board/freescale/common/Kconfig"
-
-endif
-
-if TARGET_LS2080A_SIMU
-
-config SYS_BOARD
- default "ls2080a"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
- default "ls2080a_simu"
-
-source "board/freescale/common/Kconfig"
-
-endif
+++ /dev/null
-LS2080A BOARD
-M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-M: Priyanka Jain <priyanka.jain@nxp.com>
-S: Maintained
-F: board/freescale/ls2080a/
-F: include/configs/ls2080a_emu.h
-F: configs/ls2080a_emu_defconfig
-F: include/configs/ls2080a_simu.h
-F: configs/ls2080a_simu_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2014-15 Freescale Semiconductor
-
-obj-y += ls2080a.o
-obj-y += ddr.o
+++ /dev/null
-Freescale ls2080a_emu
-
-This is a emulator target with limited peripherals.
-
-Memory map from core's view
-
-0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
-0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
-0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
-0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
-0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
-0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
-0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
-
-Other addresses are either reserved, or not used directly by U-Boot.
-This list should be updated when more addresses are used.
-
-Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
--------------------------------------------------------------------
-One needs to use appropriate bootargs to boot Linux flavors which do
-not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
-below:
-
-=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
- earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
- hugepages=16 mem=2048M'
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <log.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/clock.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
- ulong ddr_freq;
-
- if (ctrl_num > 3) {
- printf("Not supported controller number %d\n", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- /*
- * we use identical timing for all slots. If needed, change the code
- * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
- */
- if (popts->registered_dimm_en)
- pbsp = rdimms[ctrl_num];
- else
- pbsp = udimms[ctrl_num];
-
-
- /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks &&
- (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->clk_adjust = pbsp->clk_adjust;
- popts->wrlvl_start = pbsp->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found for data rate %lu MT/s\n"
- "Trying to use the highest speed (%u) parameters\n",
- ddr_freq, pbsp_highest->datarate_mhz_high);
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->wrlvl_start = pbsp_highest->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- } else {
- panic("DIMM is not supported by this board");
- }
-found:
- debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
- "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
- pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
- pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
- pbsp->wrlvl_ctl_3);
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- if (ctrl_num == CONFIG_DP_DDR_CTRL) {
- /* force DDR bus width to 32 bits */
- popts->data_bus_width = 1;
- popts->otf_burst_chop_en = 0;
- popts->burst_length = DDR_BL8;
- popts->bstopre = 0; /* enable auto precharge */
- }
-#endif
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 1;
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * Rtt and Rtt_WR override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
-#ifdef CONFIG_SYS_FSL_DDR4
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
- DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
-#else
- /* DHC_EN =1, ODT = 75 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-#endif
-}
-
-#ifdef CONFIG_SYS_DDR_RAW_TIMING
-dimm_params_t ddr_raw_timing = {
- .n_ranks = 2,
- .rank_density = 1073741824u,
- .capacity = 2147483648,
- .primary_sdram_width = 64,
- .ec_sdram_width = 0,
- .registered_dimm = 0,
- .mirrored_dimm = 0,
- .n_row_addr = 14,
- .n_col_addr = 10,
- .n_banks_per_sdram_device = 8,
- .edc_config = 0,
- .burst_lengths_bitmask = 0x0c,
-
- .tckmin_x_ps = 937,
- .caslat_x = 0x6FC << 4, /* 14,13,11,10,9,8,7,6 */
- .taa_ps = 13090,
- .twr_ps = 15000,
- .trcd_ps = 13090,
- .trrd_ps = 5000,
- .trp_ps = 13090,
- .tras_ps = 33000,
- .trc_ps = 46090,
- .trfc_ps = 160000,
- .twtr_ps = 7500,
- .trtp_ps = 7500,
- .refresh_rate_ps = 7800000,
- .tfaw_ps = 25000,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
- unsigned int controller_number,
- unsigned int dimm_number)
-{
- const char dimm_model[] = "Fixed DDR on board";
-
- if (((controller_number == 0) && (dimm_number == 0)) ||
- ((controller_number == 1) && (dimm_number == 0))) {
- memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
- }
-
- return 0;
-}
-#endif
-
-int fsl_initdram(void)
-{
- puts("Initializing DDR....");
-
- puts("using SPD\n");
- gd->ram_size = fsl_ddr_sdram();
-
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 rank_gb;
- u32 clk_adjust;
- u32 wrlvl_start;
- u32 wrlvl_ctl_2;
- u32 wrlvl_ctl_3;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-
-static const struct board_specific_parameters udimm0[] = {
- /*
- * memory controller 0
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3
- */
- {2, 2140, 0, 4, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
- {}
-};
-
-/* DP-DDR DIMM */
-static const struct board_specific_parameters udimm2[] = {
- /*
- * memory controller 2
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3
- */
- {2, 2140, 0, 4, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
- {}
-};
-
-static const struct board_specific_parameters rdimm0[] = {
- /*
- * memory controller 0
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3
- */
- {4, 2140, 0, 5, 4, 0x0, 0x0},
- {2, 2140, 0, 5, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
- {}
-};
-
-/* DP-DDR DIMM */
-static const struct board_specific_parameters rdimm2[] = {
- /*
- * memory controller 2
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3
- */
- {4, 2140, 0, 5, 4, 0x0, 0x0},
- {2, 2140, 0, 5, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
- {}
-};
-
-static const struct board_specific_parameters *udimms[] = {
- udimm0,
- udimm0,
- udimm2,
-};
-
-static const struct board_specific_parameters *rdimms[] = {
- rdimm0,
- rdimm0,
- rdimm2,
-};
-
-
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor
- */
-#include <common.h>
-#include <init.h>
-#include <malloc.h>
-#include <errno.h>
-#include <net.h>
-#include <netdev.h>
-#include <fsl_ifc.h>
-#include <fsl_ddr.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <linux/libfdt.h>
-#include <fsl-mc/fsl_mc.h>
-#include <env_internal.h>
-#include <asm/arch/soc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- init_final_memctl_regs();
-
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- fsl_lsch3_early_init_f();
- return 0;
-}
-
-void detail_board_ddr_info(void)
-{
- puts("\nDDR ");
- print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
- print_ddr_info(0);
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
- puts("\nDP-DDR ");
- print_size(gd->bd->bi_dram[2].size, "");
- print_ddr_info(CONFIG_DP_DDR_CTRL);
- }
-#endif
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- int error = 0;
-
-#ifdef CONFIG_SMC91111
- error = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
- error = cpu_eth_init(bis);
-#endif
- return error;
-}
-
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
-void fdt_fixup_board_enet(void *fdt)
-{
- int offset;
-
- offset = fdt_path_offset(fdt, "/soc/fsl-mc");
-
- /*
- * TODO: Remove this when backward compatibility
- * with old DT node (/fsl-mc) is no longer needed.
- */
- if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl-mc");
-
- if (offset < 0) {
- printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
- __func__, offset);
- return;
- }
-
- if (get_mc_boot_status() == 0 &&
- (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
- fdt_status_okay(fdt, offset);
- else
- fdt_status_fail(fdt, offset);
-}
-
-void board_quiesce_devices(void)
-{
- fsl_mc_ldpaa_exit(gd->bd);
-}
-#endif
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- u64 base[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
-
- ft_cpu_setup(blob, bd);
-
- /* fixup DT for the two GPP DDR banks */
- base[0] = gd->bd->bi_dram[0].start;
- size[0] = gd->bd->bi_dram[0].size;
- base[1] = gd->bd->bi_dram[1].start;
- size[1] = gd->bd->bi_dram[1].size;
-
-#ifdef CONFIG_RESV_RAM
- /* reduce size if reserved memory is within this bank */
- if (gd->arch.resv_ram >= base[0] &&
- gd->arch.resv_ram < base[0] + size[0])
- size[0] = gd->arch.resv_ram - base[0];
- else if (gd->arch.resv_ram >= base[1] &&
- gd->arch.resv_ram < base[1] + size[1])
- size[1] = gd->arch.resv_ram - base[1];
-#endif
-
- fdt_fixup_memory_banks(blob, base, size, 2);
-
- fdt_fsl_mc_fixup_iommu_map_entry(blob);
-
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
- fdt_fixup_board_enet(blob);
-#endif
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_RESET_PHY_R)
-void reset_phy(void)
-{
-}
-#endif
-
-#ifdef CONFIG_TFABOOT
-void *env_sf_get_env_addr(void)
-{
- return (void *)(CONFIG_SYS_FSL_QSPI_BASE1 + CONFIG_ENV_OFFSET);
-}
-#endif
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_EMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_ENV_SIZE=0x1000
-CONFIG_IDENT_STRING=" LS2080A-EMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_SLEEP is not set
-CONFIG_MP=y
-# CONFIG_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_SIMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_ENV_SIZE=0x1000
-CONFIG_IDENT_STRING=" LS2080A-SIMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SIMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_SLEEP is not set
-CONFIG_MP=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
if SYS_I2C_MXC_I2C1
config SYS_MXC_I2C1_SPEED
int "I2C Channel 1 speed"
- default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 40000000 if TARGET_LS2080A_EMU
default 100000
help
MXC I2C Channel 1 speed
if SYS_I2C_MXC_I2C2
config SYS_MXC_I2C2_SPEED
int "I2C Channel 2 speed"
- default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 40000000 if TARGET_LS2080A_EMU
default 100000
help
MXC I2C Channel 2 speed
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor
- */
-
-#ifndef __LS2_EMU_H
-#define __LS2_EMU_H
-
-#include "ls2080a_common.h"
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 133333333
-
-#define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */
-#define SPD_EEPROM_ADDRESS1 0x51
-#define SPD_EEPROM_ADDRESS2 0x52
-#define SPD_EEPROM_ADDRESS3 0x53
-#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1
-#endif
-
-#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
-/*
- * NOR Flash Timing Params
- */
-#define CONFIG_SYS_NOR0_CSPR \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR0_CSPR_EARLY \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
- FTIM0_NOR_TEADC(0x1) | \
- FTIM0_NOR_TEAHC(0x1))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
- FTIM1_NOR_TRAD_NOR(0x1))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
- FTIM2_NOR_TCH(0x0) | \
- FTIM2_NOR_TWP(0x1))
-#define CONFIG_SYS_NOR_FTIM3 0x04000000
-#define CONFIG_SYS_IFC_CCR 0x01000000
-
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
-#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL
-
-/*
- * This trick allows users to load MC images into DDR directly without
- * copying from NOR flash. It dramatically improves speed.
- */
-#define CONFIG_SYS_LS_MC_FW_IN_DDR
-#define CONFIG_SYS_LS_MC_DPL_IN_DDR
-#define CONFIG_SYS_LS_MC_DPC_IN_DDR
-
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000
-
-/* Store environment at top of flash */
-
-#endif /* __LS2_EMU_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 Freescale Semiconductor
- */
-
-#ifndef __LS2_SIMU_H
-#define __LS2_SIMU_H
-
-#include "ls2080a_common.h"
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 133333333
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1
-#endif
-
-/* SMSC 91C111 ethernet configuration */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x2210000)
-
-#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#endif
-
-/*
- * NOR Flash Timing Params
- */
-#define CONFIG_SYS_NOR0_CSPR \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR0_CSPR_EARLY \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
- FTIM0_NOR_TEADC(0x1) | \
- FTIM0_NOR_TEAHC(0x1))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
- FTIM1_NOR_TRAD_NOR(0x1))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
- FTIM2_NOR_TCH(0x0) | \
- FTIM2_NOR_TWP(0x1))
-#define CONFIG_SYS_NOR_FTIM3 0x04000000
-#define CONFIG_SYS_IFC_CCR 0x01000000
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#endif
-
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_MAX_ECCPOS 256
-#define CONFIG_SYS_NAND_MAX_OOBFREE 2
-
-#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
-#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
- | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
- | CSPR_MSEL_NAND /* MSEL = NAND */ \
- | CSPR_V)
-#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
-
-#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
- | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
- | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
- | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
- | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
- | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
- | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
- FTIM0_NAND_TWP(0x18) | \
- FTIM0_NAND_TWCHT(0x07) | \
- FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
- FTIM1_NAND_TWBE(0x39) | \
- FTIM1_NAND_TRR(0x0e) | \
- FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
- FTIM2_NAND_TREH(0x0a) | \
- FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3 0x0
-
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
-#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
-
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL
-
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR 0x5806F8000ULL
-
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000
-
-/* Store environment at top of flash */
-
-#endif /* __LS2_SIMU_H */
projects / u-boot.git / commitdiff
