arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2

This patch synchronizes the PDU001 board DTS file with the one used by
Linux 5.0-rc2.
Signed-off-by: Felix Brack <fb@ltec.ch>

diff --git a/arch/arm/dts/am335x-pdu001.dts b/arch/arm/dts/am335x-pdu001.dts
index 3a5e9526635dfb6c0d8a6cc48e2df7803054ef64..ae43d61f4e8b4333fa137bd315f05e079fd812b6 100644 (file)
--- a/arch/arm/dts/am335x-pdu001.dts
+++ b/arch/arm/dts/am335x-pdu001.dts
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+
 /*
  * pdu001.dts
  *
@@ -7,6 +6,8 @@
  * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:  GPL-2.0+
  */
 
 /dts-v1/;
@@ -17,7 +18,7 @@
 
 / {
        model = "EETS,PDU001";
-       compatible = "eets,pdu001", "ti,am33xx";
+       compatible = "ti,am33xx";
 
        chosen {
                stdout-path = &uart3;
@@ -303,12 +304,12 @@
        clock-frequency = <100000>;
 
        board_24aa025e48: board_24aa025e48@50 {
-               compatible = "microchip,24aa025e48";
+               compatible = "atmel,24c02";
                reg = <0x50>;
        };
 
        backplane_24aa025e48: backplane_24aa025e48@53 {
-               compatible = "microchip,24aa025e48";
+               compatible = "atmel,24c02";
                reg = <0x53>;
        };
 
@@ -372,8 +373,8 @@
        ti,pindir-d0-out-d1-in;
        status = "okay";
 
-       cfaf240320a032t {
-               compatible = "orise,otm3225a";
+       display-controller@0 {
+               compatible = "orisetech,otm3225a";
                reg = <0>;
                spi-max-frequency = <1000000>;
                // SPI mode 3
@@ -532,16 +533,24 @@
        pinctrl-names = "default";
        pinctrl-0 = <&davinci_mdio_default>;
        status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+
+       ethphy1: ethernet-phy@1 {
+               reg = <1>;
+       };
 };
 
 &cpsw_emac0 {
-       phy_id = <&davinci_mdio>, <0>;
+       phy-handle = <&ethphy0>;
        phy-mode = "mii";
        dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-       phy_id = <&davinci_mdio>, <1>;
+       phy-handle = <&ethphy1>;
        phy-mode = "mii";
        dual_emac_res_vlan = <2>;
 };