mtd: denali_spl: do not allocate page_buffer in .bss section

Since commit 2580a2a7e719 ("mtd: nand: Increase max sizes of OOB and
Page size"), three boards (ph1_ld4, ph1_pro4, ph1_sld8) fail to build
with the following error message:
  arm-linux-gnueabi-ld.bfd: SPL image plus BSS too big

They compile drivers/mtd/nand/denali_spl.c and it has a page_buffer
as static data:

    static uint8_t page_buffer[NAND_MAX_PAGESIZE];

This buffer required 8KB in .bss section before that commit and now
it has been increased to 16KB.  Given limited code/memory size for SPL,
it is not a good idea to allocate a page buffer statically.  In the
first place, the load address 'dst' can be used as a page buffer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/drivers/mtd/nand/denali_spl.c b/drivers/mtd/nand/denali_spl.c
index e98f537c2c36fa1d8035b4cfbc91ed2c6c0a98ee..15874135408334fd60ff9c74e3504f9af4c77a4a 100644 (file)
--- a/drivers/mtd/nand/denali_spl.c
+++ b/drivers/mtd/nand/denali_spl.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2014       Panasonic Corporation
+ * Copyright (C) 2014-2015  Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
@@ -22,7 +23,6 @@ static void __iomem *denali_flash_reg =
                        (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
 
 static const int flash_bank;
-static uint8_t page_buffer[NAND_MAX_PAGESIZE];
 static int page_size, oob_size, pages_per_block;
 
 static void index_addr(uint32_t address, uint32_t data)
@@ -144,15 +144,15 @@ static int nand_read_page(void *buf, int page)
        return 0;
 }
 
-static int nand_block_isbad(int block)
+static int nand_block_isbad(void *buf, int block)
 {
        int ret;
 
-       ret = nand_read_oob(page_buffer, block * pages_per_block);
+       ret = nand_read_oob(buf, block * pages_per_block);
        if (ret < 0)
                return ret;
 
-       return page_buffer[CONFIG_SYS_NAND_BAD_BLOCK_POS] != 0xff;
+       return *((uint8_t *)buf + CONFIG_SYS_NAND_BAD_BLOCK_POS) != 0xff;
 }
 
 /* nand_init() - initialize data to make nand usable by SPL */
@@ -184,7 +184,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
 
        while (size) {
                if (force_bad_block_check || page == 0) {
-                       ret = nand_block_isbad(block);
+                       ret = nand_block_isbad(dst, block);
                        if (ret < 0)
                                return ret;
 
@@ -196,24 +196,16 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
 
                force_bad_block_check = 0;
 
-               if (unlikely(column || size < page_size)) {
-                       /* Partial page read */
-                       ret = nand_read_page(page_buffer,
-                                            block * pages_per_block + page);
-                       if (ret < 0)
-                               return ret;
+               ret = nand_read_page(dst, block * pages_per_block + page);
+               if (ret < 0)
+                       return ret;
 
-                       readlen = min(page_size - column, (int)size);
-                       memcpy(dst, page_buffer, readlen);
+               readlen = min(page_size - column, (int)size);
 
+               if (unlikely(column)) {
+                       /* Partial page read */
+                       memmove(dst, dst + column, readlen);
                        column = 0;
-               } else {
-                       ret = nand_read_page(dst,
-                                            block * pages_per_block + page);
-                       if (ret < 0)
-                               return ret;
-
-                       readlen = page_size;
                }
 
                size -= readlen;