]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mmc: fsl_esdhc_imx: Handle the "broken-cd" property
authorFabio Estevam <festevam@gmail.com>
Mon, 6 Jan 2020 23:11:27 +0000 (20:11 -0300)
committerStefano Babic <sbabic@denx.de>
Tue, 14 Jan 2020 21:47:15 +0000 (22:47 +0100)
When no GPIO is used to read the card detect status the following
error is seen:

MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... MMC: no card present
*** Warning - No block device, using default environment

Fix it by handling the "broken-cd" property in the same way
that drivers/mmc/sdhci.c does, which considers that the SD card
is present when the "broken-cd" property is passed.

Tested on a imx6ul-evk board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
drivers/mmc/fsl_esdhc_imx.c

index f7b754bd9d37f520e92ecfcbb59c92a6d1eeb583..a69818435245f57f39e28df37a5d789bacb0a5ff 100644 (file)
@@ -115,6 +115,7 @@ struct esdhc_soc_data {
  * Following is used when Driver Model is enabled for MMC
  * @dev: pointer for the device
  * @non_removable: 0: removable; 1: non-removable
+ * @broken_cd: 0: use GPIO for card detect; 1: Do not use GPIO for card detect
  * @wp_enable: 1: enable checking wp; 0: no check
  * @vs18_enable: 1: use 1.8V voltage; 0: use 3.3V
  * @flags: ESDHC_FLAG_xx in include/fsl_esdhc_imx.h
@@ -138,6 +139,7 @@ struct fsl_esdhc_priv {
 #endif
        struct udevice *dev;
        int non_removable;
+       int broken_cd;
        int wp_enable;
        int vs18_enable;
        u32 flags;
@@ -1093,6 +1095,9 @@ static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
 #if CONFIG_IS_ENABLED(DM_MMC)
        if (priv->non_removable)
                return 1;
+
+       if (priv->broken_cd)
+               return 1;
 #if CONFIG_IS_ENABLED(DM_GPIO)
        if (dm_gpio_is_valid(&priv->cd_gpio))
                return dm_gpio_get_value(&priv->cd_gpio);
@@ -1451,6 +1456,9 @@ static int fsl_esdhc_probe(struct udevice *dev)
                             ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT);
        priv->strobe_dll_delay_target = val;
 
+       if (dev_read_bool(dev, "broken-cd"))
+               priv->broken_cd = 1;
+
        if (dev_read_bool(dev, "non-removable")) {
                priv->non_removable = 1;
         } else {