imx6dl-aristainetos2b_7.dtb \
imx6dl-aristainetos2b_csl_4.dtb \
imx6dl-aristainetos2b_csl_7.dtb \
+ imx6dl-aristainetos2c_4.dtb \
+ imx6dl-aristainetos2c_7.dtb \
imx6dl-brppt2.dtb \
imx6dl-dhcom-pdk2.dtb \
imx6dl-icore.dtb \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c-u-boot.dtsi>
+
+&lcd_panel {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp>;
+ enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ * parts for 4.3 inch LG display on spi1 port1
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "imx6dl-aristainetos2_4.dtsi"
+#include "imx6qdl-aristainetos2c.dtsi"
+
+/ {
+ model = "aristainetos2c i.MX6 Dual Lite Board 4";
+ compatible = "fsl,imx6dl";
+
+};
+
+&ecspi1 {
+ lcd_panel: display@0 {
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <1>;
+ power-on-delay = <10>;
+
+ display-timings {
+ 480x800p57 {
+ native-mode;
+ clock-frequency = <27000027>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <10>;
+ hback-porch = <59>;
+ hsync-len = <10>;
+ vback-porch = <15>;
+ vfront-porch = <15>;
+ vsync-len = <15>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c-u-boot.dtsi>
+/ {
+ vdd_panel_reg: regulator-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&panel0 {
+ power-supply = <&vdd_panel_reg>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include "imx6dl-aristainetos2_7.dtsi"
+#include "imx6qdl-aristainetos2c.dtsi"
+
+/ {
+ model = "aristainetos2c i.MX6 Dual Lite Board 7";
+ compatible = "fsl,imx6dl";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &uart2;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ };
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+ u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+ u-boot,dm-pre-reloc;
+};
+
+&backlight {
+ pwms = <&pwm1 0 300000>;
+ default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect / reset pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+ u-boot,dm-pre-reloc;
+
+ wp_spi_nor {
+ gpio-hog;
+ output-high;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset_spi_nor {
+ gpio-hog;
+ output-high;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpio4 {
+ u-boot,dm-pre-reloc;
+};
+
+&ecspi1 {
+ u-boot,dm-pre-reloc;
+};
+
+&flash {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+ u-boot,dm-pre-reloc;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "imx6qdl-aristainetos2-common.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio>;
+
+ LED_blue {
+ label = "led_blue";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_green {
+ label = "led_green";
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_red {
+ label = "led_red";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_yellow {
+ label = "led_yellow";
+ gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_ena {
+ label = "led_ena";
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio4 10 GPIO_ACTIVE_HIGH
+ &gpio4 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+ pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&ecspi4 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ status = "okay";
+};
+
+&i2c1 {
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* SS0# */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+ /* SS1# */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+ /* SS2# */
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
+ /* WP pin NOR Flash */
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
+ /* Flash nReset */
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ /* led enable */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
+ /* LCD power enable */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
+ /* led yellow */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
+ /* led red */
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
+ /* led green */
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
+ /* led blue */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
+ /* Profibus IRQ */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ /* FPGA IRQ currently unused*/
+ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
+ /* Display reset because of clock failure */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
+ /* spi bus #2 SS driver enable */
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
+ /* RST_LOC# PHY reset input (has pull-down!)*/
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
+ /* Touchscreen IRQ */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
+ /* make sure pin is GPIO and not ENET_REF_CLK */
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
+ /* TPM PP */
+ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0
+ /* TPM Reset */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ /* SD1 card detect input */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ /* SD1 write protect input */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+};
imply CMD_SATA
imply CMD_DM
+config TARGET_ARISTAINETOS2C
+ bool "Support aristainetos2-revC"
+ select BOARD_LATE_INIT
+ select MX6DL
+ select SYS_I2C_MXC
+ select MXC_UART
+ select FEC_MXC
+ select DM
+ imply CMD_SATA
+ imply CMD_DM
+
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
select BOARD_LATE_INIT
default 4
endif
+
+if TARGET_ARISTAINETOS2C
+
+source "board/aristainetos/common/Kconfig"
+
+config SYS_BOARD
+ default "aristainetos"
+
+config SYS_BOARD_VERSION
+ default 5
+
+endif
F: configs/aristainetos2_defconfig
F: configs/aristainetos2b_defconfig
F: configs/aristainetos2bcsl_defconfig
+F: configs/aristainetos2c_defconfig
F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2c_4.dts
+F: arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2c_7.dts
+F: arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2c.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
}
#if ((CONFIG_SYS_BOARD_VERSION == 2) || \
(CONFIG_SYS_BOARD_VERSION == 3) || \
- (CONFIG_SYS_BOARD_VERSION == 4))
+ (CONFIG_SYS_BOARD_VERSION == 4) || \
+ (CONFIG_SYS_BOARD_VERSION == 5))
, {
.bus = -1,
.addr = 0,
};
size_t display_count = ARRAY_SIZE(displays);
+#if defined(CONFIG_NAND)
iomux_v3_cfg_t nfc_pads[] = {
MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
/* enable apbh clock gating */
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
+#else
+static void setup_gpmi_nand(void)
+{
+}
+#endif
int board_init(void)
{
2 version 2
3 version 2b
4 version 2bcsl
+ 5 version 2c
config SYS_I2C_MXC_I2C1
default y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0xe000
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xD0000
+CONFIG_TARGET_ARISTAINETOS2C=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_IMX_HAB=y
+# CONFIG_CMD_DEKBLOB is not set
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ari_boot"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_TYPES=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_ENCRYPTION=y
+CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
+# CONFIG_CMD_SATA is not set
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_HASH is not set
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_4"
+CONFIG_OF_LIST="imx6dl-aristainetos2c_4 imx6dl-aristainetos2c_7"
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_EARLY=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_OFFSET_REDUND=0xE0000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_APBH_DMA=y
+CONFIG_APBH_DMA_BURST=y
+CONFIG_APBH_DMA_BURST8=y
+CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_DEVICE=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_IMX_WATCHDOG=y
+# CONFIG_EFI_LOADER is not set
"${fit_file}\0" \
"rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"${fit_addr_r} ${rescue_fit_file}\0"
+#elif (CONFIG_SYS_BOARD_VERSION == 5)
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "emmcpart=1\0" \
+ "emmc_rescue_part=3\0" \
+ "emmcdev=1\0" \
+ "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+ "dead=led led_red on\0" \
+ "mtdids=nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart} " \
+ "emmcpart=${emmcpart}\0" \
+ "mainboot=echo Booting from eMMC ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${emmcroot} rootfstype=ext4\0 " \
+ "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${fit_file}; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
+ "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
#else
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"dead=led led_red on\0" \
projects / u-boot.git / commitdiff
