ARM: dts: rmobile: Import proper DTS for H2 Stout

Replace the placeholder DTS for R8A7790 H2 Stout with a proper
DTS from Linux next .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

diff --git a/arch/arm/dts/r8a7790-stout.dts b/arch/arm/dts/r8a7790-stout.dts
index eb82934c59ea5fb88f02107844a7bdcb4d8e893d..301cb728fedc34b6a36fe1ee00a585aa2713b7a7 100644 (file)
--- a/arch/arm/dts/r8a7790-stout.dts
+++ b/arch/arm/dts/r8a7790-stout.dts
@@ -8,19 +8,112 @@
 
 /dts-v1/;
 #include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        model = "Stout";
        compatible = "renesas,stout", "renesas,r8a7790";
 
        aliases {
-               serial0 = &scif0;
+               serial0 = &scifa0;
+       };
+
+       chosen {
+               bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+               stdout-path = "serial0:115200n8";
        };
 
        memory@40000000 {
                device_type = "memory";
                reg = <0 0x40000000 0 0x40000000>;
        };
+
+       leds {
+               compatible = "gpio-leds";
+               led1 {
+                       gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+               };
+               led2 {
+                       gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+               };
+               led3 {
+                       gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+               };
+               led5 {
+                       gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       fixedregulator3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vcc_sdhi0: regulator-vcc-sdhi0 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       hdmi-out {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_out: endpoint {
+                               remote-endpoint = <&adv7511_out>;
+                       };
+               };
+       };
+
+       osc1_clk: osc1-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <148500000>;
+       };
+
+       osc4_clk: osc4-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <12000000>;
+       };
+};
+
+&du {
+       pinctrl-0 = <&du_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+                <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
+                <&osc1_clk>;
+       clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0";
+
+       ports {
+               port@0 {
+                       endpoint {
+                               remote-endpoint = <&adv7511_in>;
+                       };
+               };
+               port@1 {
+                       lvds_connector0: endpoint {
+                       };
+               };
+               port@2 {
+                       lvds_connector1: endpoint {
+                       };
+               };
+       };
 };
 
 &extal_clk {
@@ -28,22 +121,128 @@
 };
 
 &pfc {
+
        pinctrl-0 = <&scif_clk_pins>;
        pinctrl-names = "default";
 
-       scif0_pins: scif0 {
-               groups = "scif0_data";
-               function = "scif0";
+       du_pins: du {
+               groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
+               function = "du";
+       };
+
+       scifa0_pins: scifa0 {
+               groups = "scifa0_data_b";
+               function = "scifa0";
        };
 
        scif_clk_pins: scif_clk {
                groups = "scif_clk";
                function = "scif_clk";
        };
+
+       ether_pins: ether {
+               groups = "eth_link", "eth_mdio", "eth_rmii";
+               function = "eth";
+       };
+
+       phy1_pins: phy1 {
+               groups = "intc_irq1";
+               function = "intc";
+       };
+
+       sdhi0_pins: sd0 {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <3300>;
+       };
+
+       qspi_pins: qspi {
+               groups = "qspi_ctrl", "qspi_data4";
+               function = "qspi";
+       };
+
+       iic2_pins: iic2 {
+               groups = "iic2_b";
+               function = "iic2";
+       };
+
+       iic3_pins: iic3 {
+               groups = "iic3";
+               function = "iic3";
+       };
+
+       usb0_pins: usb0 {
+               groups = "usb0";
+               function = "usb0";
+       };
 };
 
-&scif0 {
-       pinctrl-0 = <&scif0_pins>;
+&ether {
+       pinctrl-0 = <&ether_pins &phy1_pins>;
+       pinctrl-names = "default";
+
+       phy-handle = <&phy1>;
+       renesas,ether-link-active-low;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+               micrel,led-mode = <1>;
+       };
+};
+
+&cmt0 {
+       status = "okay";
+};
+
+&qspi {
+       pinctrl-0 = <&qspi_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       flash: flash@0 {
+               compatible = "spansion,s25fl512s", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <30000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+               spi-cpha;
+               spi-cpol;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "loader";
+                               reg = <0x00000000 0x00080000>;
+                               read-only;
+                       };
+                       partition@80000 {
+                               label = "uboot";
+                               reg = <0x00080000 0x00040000>;
+                               read-only;
+                       };
+                       partition@c0000 {
+                               label = "uboot-env";
+                               reg = <0x000c0000 0x00040000>;
+                               read-only;
+                       };
+                       partition@100000 {
+                               label = "flash";
+                               reg = <0x00100000 0x03f00000>;
+                       };
+               };
+       };
+};
+
+&scifa0 {
+       pinctrl-0 = <&scifa0_pins>;
        pinctrl-names = "default";
 
        status = "okay";
@@ -52,3 +251,114 @@
 &scif_clk {
        clock-frequency = <14745600>;
 };
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&cpu0 {
+       cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic2  {
+       status = "okay";
+       pinctrl-0 = <&iic2_pins>;
+       pinctrl-names = "default";
+
+       clock-frequency = <100000>;
+
+       hdmi@39 {
+               compatible = "adi,adv7511w";
+               reg = <0x39>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+               clocks = <&osc4_clk>;
+               clock-names = "cec";
+
+               adi,input-depth = <8>;
+               adi,input-colorspace = "rgb";
+               adi,input-clock = "1x";
+               adi,input-style = <1>;
+               adi,input-justification = "evenly";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               adv7511_in: endpoint {
+                                       remote-endpoint = <&du_out_rgb>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               adv7511_out: endpoint {
+                                       remote-endpoint = <&hdmi_con_out>;
+                               };
+                       };
+               };
+       };
+};
+
+&iic3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&iic3_pins>;
+       status = "okay";
+
+       pmic@58 {
+               compatible = "dlg,da9063";
+               reg = <0x58>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-controller;
+
+               rtc {
+                       compatible = "dlg,da9063-rtc";
+               };
+
+               wdt {
+                       compatible = "dlg,da9063-watchdog";
+               };
+       };
+
+       vdd_dvfs: regulator@68 {
+               compatible = "dlg,da9210";
+               reg = <0x68>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+               regulator-min-microvolt = <1000000>;
+               regulator-max-microvolt = <1000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       vdd: regulator@70 {
+               compatible = "dlg,da9210";
+               reg = <0x70>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+               regulator-min-microvolt = <1000000>;
+               regulator-max-microvolt = <1000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&pci0 {
+       status = "okay";
+       pinctrl-0 = <&usb0_pins>;
+       pinctrl-names = "default";
+};
+
+&usbphy {
+       status = "okay";
+};