arm: bcmbca: add bcm63138 SoC support

BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

This patch applies on top of the my previous patch [1].

[1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index 63d408b367ea9700fed3b18ed23969d2872bec6b..068fd4c2f371a10b90ac32b22f17e0d2ac8008e6 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -218,6 +218,7 @@ F:  arch/arm/mach-bcmbca/
 F:     board/broadcom/bcmbca/
 N:     bcmbca
 N:     bcm[9]?47622
+N:     bcm[9]?63138
 N:     bcm[9]?63148
 N:     bcm[9]?63178
 N:     bcm[9]?6756

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 696094641bc0ea133318b1901ead576db90b90c8..a766fa33af351615f4488c6ac440485a9ad8f46b 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
 
 dtb-$(CONFIG_BCM47622) += \
        bcm947622.dtb
+dtb-$(CONFIG_BCM63138) += \
+       bcm963138.dtb
 dtb-$(CONFIG_BCM63148) += \
        bcm963148.dtb
 dtb-$(CONFIG_BCM63178) += \

diff --git a/arch/arm/dts/bcm63138.dtsi b/arch/arm/dts/bcm63138.dtsi
new file mode 100644 (file)
index 0000000..42b442a
--- /dev/null
+++ b/arch/arm/dts/bcm63138.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       compatible = "brcm,bcm63138", "brcm,bcmbca";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       interrupt-parent = <&gic>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       next-level-cache = <&L2>;
+                       reg = <0>;
+                       enable-method = "brcm,bcm63138";
+               };
+
+               cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       next-level-cache = <&L2>;
+                       reg = <1>;
+                       enable-method = "brcm,bcm63138";
+               };
+       };
+
+       clocks {
+               /* UBUS peripheral clock */
+               periph_clk: periph_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <50000000>;
+                       clock-output-names = "periph";
+               };
+
+               /* peripheral clock for system timer */
+               axi_clk: axi_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-factor-clock";
+                       clocks = <&armpll>;
+                       clock-div = <2>;
+                       clock-mult = <1>;
+               };
+
+               /* APB bus clock */
+               apb_clk: apb_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-factor-clock";
+                       clocks = <&armpll>;
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
+       };
+
+       /* ARM bus */
+       axi@80000000 {
+               compatible = "simple-bus";
+               ranges = <0 0x80000000 0x784000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               L2: cache-controller@1d000 {
+                       compatible = "arm,pl310-cache";
+                       reg = <0x1d000 0x1000>;
+                       cache-unified;
+                       cache-level = <2>;
+                       cache-size = <524288>;
+                       cache-sets = <1024>;
+                       cache-line-size = <32>;
+                       interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               scu: scu@1e000 {
+                       compatible = "arm,cortex-a9-scu";
+                       reg = <0x1e000 0x100>;
+               };
+
+               gic: interrupt-controller@1f000 {
+                       compatible = "arm,cortex-a9-gic";
+                       reg = <0x1f000 0x1000
+                               0x1e100 0x100>;
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       interrupt-controller;
+               };
+
+               global_timer: timer@1e200 {
+                       compatible = "arm,cortex-a9-global-timer";
+                       reg = <0x1e200 0x20>;
+                       interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+                       clocks = <&axi_clk>;
+               };
+
+               local_timer: local-timer@1e600 {
+                       compatible = "arm,cortex-a9-twd-timer";
+                       reg = <0x1e600 0x20>;
+                       interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+                                                 IRQ_TYPE_EDGE_RISING)>;
+                       clocks = <&axi_clk>;
+               };
+
+               twd_watchdog: watchdog@1e620 {
+                       compatible = "arm,cortex-a9-twd-wdt";
+                       reg = <0x1e620 0x20>;
+                       interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+                                                 IRQ_TYPE_LEVEL_HIGH)>;
+               };
+
+               armpll: armpll@20000 {
+                       #clock-cells = <0>;
+                       compatible = "brcm,bcm63138-armpll";
+                       clocks = <&periph_clk>;
+                       reg = <0x20000 0xf00>;
+               };
+       };
+
+       /* Legacy UBUS base */
+       bus@fffe8000 {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0 0xfffe8000 0x8000>;
+
+               timer0: timer@80 {
+                       compatible = "brcm,bcmbca-periph-timer";
+                       reg = <0x80 0x28>;
+                       clocks = <&periph_clk>;
+               };
+
+               uart0: serial@600 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x600 0x20>;
+                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&periph_clk>;
+                       clock-names = "refclk";
+                       status = "disabled";
+               };
+       };
+};

diff --git a/arch/arm/dts/bcm963138.dts b/arch/arm/dts/bcm963138.dts
new file mode 100644 (file)
index 0000000..6158a87
--- /dev/null
+++ b/arch/arm/dts/bcm963138.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+       model = "Broadcom BCM963138 Reference Board";
+       compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x08000000>;
+       };
+};
+
+&uart0 {
+       status = "okay";
+};

diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 9a29c4186bf02ca0534d6c090d5f9bbeb605a748..785b3df5dcc2ad32e4997799f54a66415a1c4a5a 100644 (file)
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -12,6 +12,14 @@ config BCM47622
        select DM_SERIAL
        select PL01X_SERIAL
 
+config BCM63138
+       bool "Support for Broadcom 63138 Family"
+       select TIMER
+       select STI_TIMER
+       select CPU_V7A
+       select DM_SERIAL
+       select BCM6345_SERIAL
+
 config BCM63148
        bool "Support for Broadcom 63148 Family"
        select SYS_ARCH_TIMER
@@ -48,6 +56,7 @@ config BCM6878
        select PL01X_SERIAL
 
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63138/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63148/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6756/Kconfig"

diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 8a22f9ad975d00da7d3434095b6345c25eabf00e..d917615c166959308513a459bd9e972d584a2a46 100644 (file)
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63138) += bcm63138/
 obj-$(CONFIG_BCM63148) += bcm63148/
 obj-$(CONFIG_BCM63178) += bcm63178/
 obj-$(CONFIG_BCM6756) += bcm6756/

diff --git a/arch/arm/mach-bcmbca/bcm63138/Kconfig b/arch/arm/mach-bcmbca/bcm63138/Kconfig
new file mode 100644 (file)
index 0000000..a34888d
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63138/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63138
+
+config TARGET_BCM963138
+       bool "Broadcom 63138 Reference Board"
+       depends on ARCH_BCMBCA
+
+config SYS_SOC
+       default "bcm63138"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif

diff --git a/arch/arm/mach-bcmbca/bcm63138/Makefile b/arch/arm/mach-bcmbca/bcm63138/Makefile
new file mode 100644 (file)
index 0000000..beb979a
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63138/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o

diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index d070ebab707e13345c57fbc15a0de394a3e9f455..aefd7372d88355bb3861b836e1a92cdf505d24f2 100644 (file)
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -16,6 +16,13 @@ config SYS_CONFIG_NAME
 
 endif
 
+if TARGET_BCM963138
+
+config SYS_CONFIG_NAME
+       default "bcm963138"
+
+endif
+
 if TARGET_BCM963148
 
 config SYS_CONFIG_NAME

diff --git a/configs/bcm963138_defconfig b/configs/bcm963138_defconfig
new file mode 100644 (file)
index 0000000..5aec7b8
--- /dev/null
+++ b/configs/bcm963138_defconfig
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63138=y
+CONFIG_TARGET_BCM963138=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963138"
+CONFIG_IDENT_STRING=" Broadcom BCM63138"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y

diff --git a/include/configs/bcm963138.h b/include/configs/bcm963138.h
new file mode 100644 (file)
index 0000000..361569a
--- /dev/null
+++ b/include/configs/bcm963138.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963138_H
+#define __BCM963138_H
+
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_HZ_CLOCK            500000000
+
+#endif