+++ /dev/null
-#
-# (C) Copyright 2008
-# Graeme Russ, graeme.russ@gmail.com.
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB := $(obj)lib$(SOC).o
-
-COBJS-$(CONFIG_SYS_SC520) += sc520.o
-COBJS-$(CONFIG_PCI) += sc520_pci.o
-COBJS-$(CONFIG_SYS_SC520_RESET) += sc520_reset.o
-COBJS-$(CONFIG_SYS_SC520) += sc520_sdram.o
-COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o
-COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o
-
-SOBJS-$(CONFIG_SYS_SC520) += sc520_car.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
\ No newline at end of file
+++ /dev/null
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <asm/arch/sc520.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
- DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off));
-
- DEFINE(GENERATED_SC520_PAR0, offsetof(struct sc520_mmcr, par[0]));
- DEFINE(GENERATED_SC520_PAR1, offsetof(struct sc520_mmcr, par[1]));
- DEFINE(GENERATED_SC520_PAR2, offsetof(struct sc520_mmcr, par[2]));
- DEFINE(GENERATED_SC520_PAR3, offsetof(struct sc520_mmcr, par[3]));
- DEFINE(GENERATED_SC520_PAR4, offsetof(struct sc520_mmcr, par[4]));
- DEFINE(GENERATED_SC520_PAR5, offsetof(struct sc520_mmcr, par[5]));
- DEFINE(GENERATED_SC520_PAR6, offsetof(struct sc520_mmcr, par[6]));
- DEFINE(GENERATED_SC520_PAR7, offsetof(struct sc520_mmcr, par[7]));
- DEFINE(GENERATED_SC520_PAR8, offsetof(struct sc520_mmcr, par[8]));
- DEFINE(GENERATED_SC520_PAR9, offsetof(struct sc520_mmcr, par[9]));
- DEFINE(GENERATED_SC520_PAR10, offsetof(struct sc520_mmcr, par[10]));
- DEFINE(GENERATED_SC520_PAR11, offsetof(struct sc520_mmcr, par[11]));
- DEFINE(GENERATED_SC520_PAR12, offsetof(struct sc520_mmcr, par[12]));
- DEFINE(GENERATED_SC520_PAR13, offsetof(struct sc520_mmcr, par[13]));
- DEFINE(GENERATED_SC520_PAR14, offsetof(struct sc520_mmcr, par[14]));
- DEFINE(GENERATED_SC520_PAR15, offsetof(struct sc520_mmcr, par[15]));
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor-flags.h>
-#include <asm/arch/sc520.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE;
-
-int cpu_init_f(void)
-{
- if (CONFIG_SYS_SC520_HIGH_SPEED) {
- /* set it to 133 MHz and write back */
- writeb(0x02, &sc520_mmcr->cpuctl);
- gd->cpu_clk = 133000000;
- } else {
- /* set it to 100 MHz and write back */
- writeb(0x01, &sc520_mmcr->cpuctl);
- gd->cpu_clk = 100000000;
- }
-
- /* wait at least one millisecond */
- asm("movl $0x2000, %%ecx\n"
- "0: pushl %%ecx\n"
- "popl %%ecx\n"
- "loop 0b\n" : : : "ecx");
-
- return x86_cpu_init_f();
-}
-
-int cpu_init_r(void)
-{
- /* Disable the PAR used for CAR */
- writel(0x0000000, &sc520_mmcr->par[2]);
-
- /* turn on the SDRAM write buffer */
- writeb(0x11, &sc520_mmcr->dbctl);
-
- return x86_cpu_init_r();
-}
+++ /dev/null
-/*
- * (C) Copyright 2010-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/processor-flags.h>
-#include <asm/arch/sc520.h>
-#include <generated/asm-offsets.h>
-
-.section .text
-
-.globl car_init
-car_init:
- /*
- * How to enable Cache-As-RAM for the AMD Elan SC520:
- * 1. Turn off the CPU Cache (may not be strictly required)
- * 2. Set code execution PAR (usually the BOOTCS region) to be
- * non-cachable
- * 3. Create a Cachable PAR Region for an area of memory which is
- * a) NOT where the code is being executed
- * b) NOT SDRAM (Controller not initialised yet)
- * c) WILL response to read requests
- * The easiest way to do this is to create a second BOOTCS
- * PAR mappnig with an address != the PAR in step 2
- * 4. Issue a wbinvd to invalidate the CPU cache
- * 5. Turn on the CPU Cache
- * 6. Read 16kB from the cached PAR region setup in step 3
- * 7. Turn off the CPU Cache (but DO NOT issue a wbinvd)
- *
- * The following code uses PAR2 as the cached PAR (PAR0 and PAR1
- * are avoided as these are the only two PARs which can be used
- * as PCI BUS Memory regions which the board might require)
- *
- * The configuration of PAR2 must be set in the board configuration
- * file as CONFIG_SYS_SC520_CAR_PAR
- */
-
- /* Configure Cache-As-RAM PAR */
- movl $CONFIG_SYS_SC520_CAR_PAR, %eax
- movl $(SC520_MMCR_BASE + GENERATED_SC520_PAR2), %edi
- movl %eax, (%edi)
-
- /* Trash the cache then turn it on */
- wbinvd
- movl %cr0, %eax
- andl $~(X86_CR0_NW | X86_CR0_CD), %eax
- movl %eax, %cr0
-
- /*
- * The cache is now enabled and empty. Map a region of memory to
- * it by reading that region.
- */
- movl $CONFIG_SYS_CAR_ADDR, %esi
- movl $CONFIG_SYS_CAR_SIZE, %ecx
- shrl $2, %ecx /* we are reading longs */
- cld
- rep lodsl
-
- /* Turn off the cache, but don't trash it */
- movl %cr0, %eax
- orl $(X86_CR0_NW | X86_CR0_CD), %eax
- movl %eax, %cr0
-
- /* Clear the CAR region */
- xorl %eax, %eax
- movl $CONFIG_SYS_CAR_ADDR, %edi
- movl $CONFIG_SYS_CAR_SIZE, %ecx
- shrl $2, %ecx /* we are writing longs */
- rep stosl
-
- /*
- * Done - We should now have CONFIG_SYS_CAR_SIZE bytes of
- * Cache-As-RAM
- */
- jmp car_init_ret
+++ /dev/null
-/*
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/arch/pci.h>
-#include <asm/arch/sc520.h>
-
-static struct {
- u8 priority;
- u16 level_reg;
- u8 level_bit;
-} sc520_irq[] = {
- { SC520_IRQ0, 0, 0x01 },
- { SC520_IRQ1, 0, 0x02 },
- { SC520_IRQ2, 1, 0x02 },
- { SC520_IRQ3, 0, 0x08 },
- { SC520_IRQ4, 0, 0x10 },
- { SC520_IRQ5, 0, 0x20 },
- { SC520_IRQ6, 0, 0x40 },
- { SC520_IRQ7, 0, 0x80 },
-
- { SC520_IRQ8, 1, 0x01 },
- { SC520_IRQ9, 1, 0x02 },
- { SC520_IRQ10, 1, 0x04 },
- { SC520_IRQ11, 1, 0x08 },
- { SC520_IRQ12, 1, 0x10 },
- { SC520_IRQ13, 1, 0x20 },
- { SC520_IRQ14, 1, 0x40 },
- { SC520_IRQ15, 1, 0x80 }
-};
-
-/* The interrupt used for PCI INTA-INTD */
-int sc520_pci_ints[15] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1
-};
-
-/* utility function to configure a pci interrupt */
-int pci_sc520_set_irq(int pci_pin, int irq)
-{
- int i;
- u8 tmpb;
- u16 tmpw;
-
- debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
-
- if (irq < 0 || irq > 15)
- return -1; /* illegal irq */
-
- if (pci_pin < 0 || pci_pin > 15)
- return -1; /* illegal pci int pin */
-
- /* first disable any non-pci interrupt source that use
- * this level */
-
- /* PCI interrupt mapping (A through D)*/
- for (i = 0; i <= 3 ; i++) {
- tmpb = readb(&sc520_mmcr->pci_int_map[i]);
-
- if (tmpb == sc520_irq[irq].priority)
- writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]);
- }
-
- /* GP IRQ interrupt mapping */
- for (i = 0; i <= 10 ; i++) {
- tmpb = readb(&sc520_mmcr->gp_int_map[i]);
-
- if (tmpb == sc520_irq[irq].priority)
- writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]);
- }
-
- /* Set the trigger to level */
- tmpb = readb(&sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
- tmpb |= sc520_irq[irq].level_bit;
- writeb(tmpb, &sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
-
-
- if (pci_pin < 4) {
- /* PCI INTA-INTD */
- /* route the interrupt */
- writeb(sc520_irq[irq].priority,
- &sc520_mmcr->pci_int_map[pci_pin]);
- } else {
- /* GPIRQ0-GPIRQ10 used for additional PCI INTS */
- writeb(sc520_irq[irq].priority,
- &sc520_mmcr->gp_int_map[pci_pin - 4]);
-
- /* also set the polarity in this case */
- tmpw = readw(&sc520_mmcr->intpinpol);
- tmpw |= (1 << (pci_pin-4));
- writew(tmpw, &sc520_mmcr->intpinpol);
- }
-
- /* register the pin */
- sc520_pci_ints[pci_pin] = irq;
-
-
- return 0; /* OK */
-}
-
-void pci_sc520_init(struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
- hose->region_count = pci_set_regions(hose);
-
- pci_setup_type1(hose);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-
- /* enable target memory acceses on host brige */
- pci_write_config_word(0, PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-}
+++ /dev/null
-/*
- * (C) Copyright 2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sc520.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void reset_cpu(ulong addr)
-{
- printf("Resetting using SC520 MMCR\n");
- /* Write a '1' to the SYS_RST of the RESCFG MMCR */
- writeb(0x01, &sc520_mmcr->rescfg);
-
- /* NOTREACHED */
-}
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor-flags.h>
-#include <asm/arch/sc520.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct sc520_sdram_info {
- u8 banks;
- u8 columns;
- u8 rows;
- u8 size;
-};
-
-static void sc520_sizemem(void);
-static void sc520_set_dram_timing(void);
-static void sc520_set_dram_refresh_rate(void);
-static void sc520_enable_dram_refresh(void);
-static void sc520_enable_sdram(void);
-
-int dram_init_f(void)
-{
- sc520_sizemem();
- sc520_set_dram_timing();
- sc520_set_dram_refresh_rate();
- sc520_enable_dram_refresh();
- sc520_enable_sdram();
-
- return 0;
-}
-
-static inline void sc520_dummy_write(void)
-{
- writew(0x0000, CACHELINESZ);
-}
-static inline void sc520_issue_sdram_op_mode_select(u8 command)
-{
- writeb(command, &sc520_mmcr->drcctl);
- sc520_dummy_write();
-}
-
-static inline int check_long(u32 test_long)
-{
- u8 i;
- u8 tmp_byte = (u8)(test_long & 0x000000ff);
-
- for (i = 1; i < 4; i++) {
- if ((u8)((test_long >> (i * 8)) & 0x000000ff) != tmp_byte)
- return -1;
- }
-
- return 0;
-}
-
-static inline int write_and_test(u32 data, u32 address)
-{
- writel(data, address);
- if (readl(address) == data)
- return 0; /* Good */
- else
- return -1; /* Bad */
-}
-
-static void sc520_enable_sdram(void)
-{
- u32 par_config;
-
- /* Enable Writes, Caching and Code Execution to SDRAM */
- par_config = readl(&sc520_mmcr->par[3]);
- par_config &= ~(SC520_PAR_EXEC_DIS |
- SC520_PAR_CACHE_DIS |
- SC520_PAR_WRITE_DIS);
- writel(par_config, &sc520_mmcr->par[3]);
-
- par_config = readl(&sc520_mmcr->par[4]);
- par_config &= ~(SC520_PAR_EXEC_DIS |
- SC520_PAR_CACHE_DIS |
- SC520_PAR_WRITE_DIS);
- writel(par_config, &sc520_mmcr->par[4]);
-}
-
-static void sc520_set_dram_timing(void)
-{
- u8 drctmctl = 0x00;
-
-#if defined CONFIG_SYS_SDRAM_DRCTMCTL
- /* just have your hardware designer _GIVE_ you what you need here! */
- drctmctl = CONFIG_SYS_SDRAM_DRCTMCTL;
-#else
- switch (CONFIG_SYS_SDRAM_RAS_CAS_DELAY) {
- case 2:
- break;
- case 3:
- drctmctl |= 0x01;
- break;
- case 4:
- default:
- drctmctl |= 0x02;
- break;
- }
-
- switch (CONFIG_SYS_SDRAM_PRECHARGE_DELAY) {
- case 2:
- break;
- case 3:
- drctmctl |= 0x04;
- break;
- case 4:
- default:
- drctmctl |= 0x08;
- break;
-
- case 6:
- drctmctl |= 0x0c;
- break;
- }
-
- switch (CONFIG_SYS_SDRAM_CAS_LATENCY) {
- case 2:
- break;
- case 3:
- default:
- drctmctl |= 0x10;
- break;
- }
-#endif
- writeb(drctmctl, &sc520_mmcr->drctmctl);
-
- /* Issue load mode register command */
- sc520_issue_sdram_op_mode_select(0x03);
-}
-
-static void sc520_set_dram_refresh_rate(void)
-{
- u8 drctl;
-
- drctl = readb(&sc520_mmcr->drcctl);
- drctl &= 0xcf;
-
- switch (CONFIG_SYS_SDRAM_REFRESH_RATE) {
- case 78:
- break;
- case 156:
- default:
- drctl |= 0x10;
- break;
- case 312:
- drctl |= 0x20;
- break;
- case 624:
- drctl |= 0x30;
- break;
- }
-
- writeb(drctl, &sc520_mmcr->drcctl);
-}
-
-static void sc520_enable_dram_refresh(void)
-{
- u8 drctl;
-
- drctl = readb(&sc520_mmcr->drcctl);
- drctl &= 0x30; /* keep refresh rate */
- drctl |= 0x08; /* enable refresh, normal mode */
-
- writeb(drctl, &sc520_mmcr->drcctl);
-}
-
-static void sc520_get_bank_info(int bank, struct sc520_sdram_info *bank_info)
-{
- u32 col_data;
- u32 row_data;
-
- u32 drcbendadr;
- u16 drccfg;
-
- u8 banks = 0x00;
- u8 columns = 0x00;
- u8 rows = 0x00;
-
- bank_info->banks = 0x00;
- bank_info->columns = 0x00;
- bank_info->rows = 0x00;
- bank_info->size = 0x00;
-
- if ((bank < 0) || (bank > 3)) {
- printf("Bad Bank ID\n");
- return;
- }
-
- /* Save configuration */
- drcbendadr = readl(&sc520_mmcr->drcbendadr);
- drccfg = readw(&sc520_mmcr->drccfg);
-
- /* Setup SDRAM Bank to largest possible size */
- writew(0x000b << (bank * 4), &sc520_mmcr->drccfg);
-
- /* Set ending address for this bank */
- writel(0x000000ff << (bank * 8), &sc520_mmcr->drcbendadr);
-
- /* write col 11 wrap adr */
- if (write_and_test(COL11_DATA, COL11_ADR) != 0)
- goto restore_and_exit;
-
- /* write col 10 wrap adr */
- if (write_and_test(COL10_DATA, COL10_ADR) != 0)
- goto restore_and_exit;
-
- /* write col 9 wrap adr */
- if (write_and_test(COL09_DATA, COL09_ADR) != 0)
- goto restore_and_exit;
-
- /* write col 8 wrap adr */
- if (write_and_test(COL08_DATA, COL08_ADR) != 0)
- goto restore_and_exit;
-
- col_data = readl(COL11_ADR);
-
- /* All four bytes in the read long must be the same */
- if (check_long(col_data) < 0)
- goto restore_and_exit;
-
- if ((col_data >= COL08_DATA) && (col_data <= COL11_DATA))
- columns = (u8)(col_data & 0x000000ff);
- else
- goto restore_and_exit;
-
- /* write row 14 wrap adr */
- if (write_and_test(ROW14_DATA, ROW14_ADR) != 0)
- goto restore_and_exit;
-
- /* write row 13 wrap adr */
- if (write_and_test(ROW13_DATA, ROW13_ADR) != 0)
- goto restore_and_exit;
-
- /* write row 12 wrap adr */
- if (write_and_test(ROW12_DATA, ROW12_ADR) != 0)
- goto restore_and_exit;
-
- /* write row 11 wrap adr */
- if (write_and_test(ROW11_DATA, ROW11_ADR) != 0)
- goto restore_and_exit;
-
- if (write_and_test(ROW10_DATA, ROW10_ADR) != 0)
- goto restore_and_exit;
-
- /*
- * read data @ row 12 wrap adr to determine number of banks,
- * and read data @ row 14 wrap adr to determine number of rows.
- * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks,
- */
- row_data = readl(ROW12_ADR);
-
- /* All four bytes in the read long must be the same */
- if (check_long(row_data) != 0)
- goto restore_and_exit;
-
- switch (row_data) {
- case ROW10_DATA:
- banks = 2;
- break;
-
- case ROW11_DATA:
- case ROW12_DATA:
- banks = 4;
- break;
-
- default:
- goto restore_and_exit;
- }
-
- row_data = readl(ROW14_ADR);
-
- /* All four bytes in the read long must be the same */
- if (check_long(row_data) != 0)
- goto restore_and_exit;
-
- switch (row_data) {
- case ROW11_DATA:
- case ROW12_DATA:
- case ROW13_DATA:
- case ROW14_DATA:
- rows = (u8)(row_data & 0x000000ff);
- break;
-
- default:
- goto restore_and_exit;
- }
-
- bank_info->banks = banks;
- bank_info->columns = columns;
- bank_info->rows = rows;
-
- if ((bank_info->banks != 0) &&
- (bank_info->columns != 0) &&
- (bank_info->rows != 0)) {
- bank_info->size = bank_info->rows;
- bank_info->size >>= (11 - bank_info->columns);
- bank_info->size++;
- }
-
-restore_and_exit:
- /* Restore configuration */
- writel(drcbendadr, &sc520_mmcr->drcbendadr);
- writew(drccfg, &sc520_mmcr->drccfg);
-}
-
-static void sc520_setup_sizemem(void)
-{
- u8 i;
-
- /* Disable write buffer */
- writeb(0x00, &sc520_mmcr->dbctl);
-
- /* Disable ECC */
- writeb(0x00, &sc520_mmcr->eccctl);
-
- /* Set slowest SDRAM timing */
- writeb(0x1e, &sc520_mmcr->drctmctl);
-
- /* Issue a NOP to all SDRAM banks */
- sc520_issue_sdram_op_mode_select(0x01);
-
- /* Delay for 100 microseconds */
- udelay(100);
-
- /* Issue 'All Banks Precharge' command */
- sc520_issue_sdram_op_mode_select(0x02);
-
- /* Issue 2 'Auto Refresh Enable' command */
- sc520_issue_sdram_op_mode_select(0x04);
- sc520_dummy_write();
-
- /* Issue 'Load Mode Register' command */
- sc520_issue_sdram_op_mode_select(0x03);
-
- /* Issue 8 more 'Auto Refresh Enable' commands */
- sc520_issue_sdram_op_mode_select(0x04);
- for (i = 0; i < 7; i++)
- sc520_dummy_write();
-
- /* Set control register to 'Normal Mode' */
- writeb(0x00, &sc520_mmcr->drcctl);
-}
-
-static void sc520_sizemem(void)
-{
- struct sc520_sdram_info sdram_info[4];
- u8 bank_config = 0x00;
- u8 end_addr = 0x00;
- u16 drccfg = 0x0000;
- u32 drcbendadr = 0x00000000;
- u8 i;
-
- /* Use PARs to disable caching of maximum allowable 256MB SDRAM */
- writel(SC520_SDRAM1_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[3]);
- writel(SC520_SDRAM2_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[4]);
-
- sc520_setup_sizemem();
-
- gd->ram_size = 0;
-
- /* Size each SDRAM bank */
- for (i = 0; i <= 3; i++) {
- sc520_get_bank_info(i, &sdram_info[i]);
-
- if (sdram_info[i].banks != 0) {
- /* Update Configuration register */
- bank_config = sdram_info[i].columns - 8;
-
- if (sdram_info[i].banks == 4)
- bank_config |= 0x08;
-
- drccfg |= bank_config << (i * 4);
-
- /* Update End Address register */
- end_addr += sdram_info[i].size;
- drcbendadr |= (end_addr | 0x80) << (i * 8);
-
- gd->ram_size += sdram_info[i].size << 22;
- }
-
- /* Issue 'All Banks Precharge' command */
- sc520_issue_sdram_op_mode_select(0x02);
-
- /* Set control register to 'Normal Mode' */
- writeb(0x00, &sc520_mmcr->drcctl);
- }
-
- writel(drcbendadr, &sc520_mmcr->drcbendadr);
- writew(drccfg, &sc520_mmcr->drccfg);
-
- /* Clear PARs preventing caching of SDRAM */
- writel(0x00000000, &sc520_mmcr->par[3]);
- writel(0x00000000, &sc520_mmcr->par[4]);
-}
-
-int dram_init(void)
-{
- ulong dram_ctrl;
- ulong dram_present = 0x00000000;
-
- /*
- * We read-back the configuration of the dram
- * controller that the assembly code wrote
- */
- dram_ctrl = readl(&sc520_mmcr->drcbendadr);
-
- gd->bd->bi_dram[0].start = 0;
- if (dram_ctrl & 0x80) {
- /* bank 0 enabled */
- gd->bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
- dram_present = gd->bd->bi_dram[1].start;
- gd->bd->bi_dram[0].size = gd->bd->bi_dram[1].start;
- } else {
- gd->bd->bi_dram[0].size = 0;
- gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start;
- }
-
- if (dram_ctrl & 0x8000) {
- /* bank 1 enabled */
- gd->bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
- dram_present = gd->bd->bi_dram[2].start;
- gd->bd->bi_dram[1].size = gd->bd->bi_dram[2].start -
- gd->bd->bi_dram[1].start;
- } else {
- gd->bd->bi_dram[1].size = 0;
- gd->bd->bi_dram[2].start = gd->bd->bi_dram[1].start;
- }
-
- if (dram_ctrl & 0x800000) {
- /* bank 2 enabled */
- gd->bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
- dram_present = gd->bd->bi_dram[3].start;
- gd->bd->bi_dram[2].size = gd->bd->bi_dram[3].start -
- gd->bd->bi_dram[2].start;
- } else {
- gd->bd->bi_dram[2].size = 0;
- gd->bd->bi_dram[3].start = gd->bd->bi_dram[2].start;
- }
-
- if (dram_ctrl & 0x80000000) {
- /* bank 3 enabled */
- dram_present = (dram_ctrl & 0x7f000000) >> 2;
- gd->bd->bi_dram[3].size = dram_present -
- gd->bd->bi_dram[3].start;
- } else {
- gd->bd->bi_dram[3].size = 0;
- }
-
- gd->ram_size = dram_present;
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ssi.h>
-#include <asm/arch/sc520.h>
-
-int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
-{
- u8 temp = 0;
-
- if (freq >= 8192)
- temp |= CTL_CLK_SEL_4;
- else if (freq >= 4096)
- temp |= CTL_CLK_SEL_8;
- else if (freq >= 2048)
- temp |= CTL_CLK_SEL_16;
- else if (freq >= 1024)
- temp |= CTL_CLK_SEL_32;
- else if (freq >= 512)
- temp |= CTL_CLK_SEL_64;
- else if (freq >= 256)
- temp |= CTL_CLK_SEL_128;
- else if (freq >= 128)
- temp |= CTL_CLK_SEL_256;
- else
- temp |= CTL_CLK_SEL_512;
-
- if (!lsb_first)
- temp |= MSBF_ENB;
-
- if (inv_clock)
- temp |= CLK_INV_ENB;
-
- if (inv_phase)
- temp |= PHS_INV_ENB;
-
- writeb(temp, &sc520_mmcr->ssictl);
-
- return 0;
-}
-
-u8 ssi_txrx_byte(u8 data)
-{
- writeb(data, &sc520_mmcr->ssixmit);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
- ;
- writeb(SSICMD_CMD_SEL_XMITRCV, &sc520_mmcr->ssicmd);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
- ;
-
- return readb(&sc520_mmcr->ssircv);
-}
-
-void ssi_tx_byte(u8 data)
-{
- writeb(data, &sc520_mmcr->ssixmit);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
- ;
- writeb(SSICMD_CMD_SEL_XMIT, &sc520_mmcr->ssicmd);
-}
-
-u8 ssi_rx_byte(void)
-{
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
- ;
- writeb(SSICMD_CMD_SEL_RCV, &sc520_mmcr->ssicmd);
- while (readb(&sc520_mmcr->ssista) & SSISTA_BSY)
- ;
-
- return readb(&sc520_mmcr->ssircv);
-}
+++ /dev/null
-/*
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/interrupt.h>
-#include <asm/arch/sc520.h>
-
-void sc520_timer_isr(void)
-{
- /* Ack the GP Timer Interrupt */
- writeb(0x02, &sc520_mmcr->gptmrsta);
-}
-
-int timer_init(void)
-{
- /* Register the SC520 specific timer interrupt handler */
- register_timer_isr(sc520_timer_isr);
-
- /* Install interrupt handler for GP Timer 1 */
- irq_install_handler (0, timer_isr, NULL);
-
- /* Map GP Timer 1 to Master PIC IR0 */
- writeb(0x01, &sc520_mmcr->gp_tmr_int_map[1]);
-
- /* Disable GP Timers 1 & 2 - Allow configuration writes */
- writew(0x4000, &sc520_mmcr->gptmr1ctl);
- writew(0x4000, &sc520_mmcr->gptmr2ctl);
-
- /* Reset GP Timers 1 & 2 */
- writew(0x0000, &sc520_mmcr->gptmr1cnt);
- writew(0x0000, &sc520_mmcr->gptmr2cnt);
-
- /* Setup GP Timer 2 as a 100kHz (10us) prescaler */
- writew(83, &sc520_mmcr->gptmr2maxcmpa);
- writew(0xc001, &sc520_mmcr->gptmr2ctl);
-
- /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */
- writew(100, &sc520_mmcr->gptmr1maxcmpa);
- writew(0xe009, &sc520_mmcr->gptmr1ctl);
-
- unmask_irq(0);
-
- /* Clear the GP Timer 1 status register to get the show rolling*/
- writeb(0x02, &sc520_mmcr->gptmrsta);
-
- return 0;
-}
-
-/* Allow boards to override udelay implementation */
-void __udelay(unsigned long usec)
- __attribute__((weak, alias("sc520_udelay")));
-
-void sc520_udelay(unsigned long usec)
-{
- int m = 0;
- long u;
-
- readw(&sc520_mmcr->swtmrmilli);
- readw(&sc520_mmcr->swtmrmicro);
-
- do {
- m += readw(&sc520_mmcr->swtmrmilli);
- u = readw(&sc520_mmcr->swtmrmicro) + (m * 1000);
- } while (u < usec);
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SC520_PCI_H_
-#define _ASM_IC_SC520_PCI_H_ 1
-
-/* bus mapping constants (used for PCI core initialization) */ /* bus mapping constants */
-#define SC520_REG_ADDR 0x00000cf8
-#define SC520_REG_DATA 0x00000cfc
-
-#define SC520_ISA_MEM_PHYS 0x00000000
-#define SC520_ISA_MEM_BUS 0x00000000
-#define SC520_ISA_MEM_SIZE 0x01000000
-
-#define SC520_ISA_IO_PHYS 0x00000000
-#define SC520_ISA_IO_BUS 0x00000000
-#define SC520_ISA_IO_SIZE 0x00001000
-
-/* PCI I/O space from 0x1000 to 0xdfff
- * (make 0xe000-0xfdff available for stuff like PCCard boot) */
-#define SC520_PCI_IO_PHYS 0x00001000
-#define SC520_PCI_IO_BUS 0x00001000
-#define SC520_PCI_IO_SIZE 0x0000d000
-
-/* system memory from 0x00000000 to 0x0fffffff */
-#define SC520_PCI_MEMORY_PHYS 0x00000000
-#define SC520_PCI_MEMORY_BUS 0x00000000
-#define SC520_PCI_MEMORY_SIZE 0x10000000
-
-/* PCI bus memory from 0x10000000 to 0x26ffffff
- * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
-#define SC520_PCI_MEM_PHYS 0x10000000
-#define SC520_PCI_MEM_BUS 0x10000000
-#define SC520_PCI_MEM_SIZE 0x17000000
-
-/* pin number used for PCI interrupt mappings */
-#define SC520_PCI_INTA 0
-#define SC520_PCI_INTB 1
-#define SC520_PCI_INTC 2
-#define SC520_PCI_INTD 3
-#define SC520_PCI_GPIRQ0 4
-#define SC520_PCI_GPIRQ1 5
-#define SC520_PCI_GPIRQ2 6
-#define SC520_PCI_GPIRQ3 7
-#define SC520_PCI_GPIRQ4 8
-#define SC520_PCI_GPIRQ5 9
-#define SC520_PCI_GPIRQ6 10
-#define SC520_PCI_GPIRQ7 11
-#define SC520_PCI_GPIRQ8 12
-#define SC520_PCI_GPIRQ9 13
-#define SC520_PCI_GPIRQ10 14
-
-extern int sc520_pci_ints[];
-
-void pci_sc520_init(struct pci_controller *hose);
-int pci_set_regions(struct pci_controller *hose);
-int pci_sc520_set_irq(int pci_pin, int irq);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SC520_H_
-#define _ASM_IC_SC520_H_ 1
-
-#ifndef __ASSEMBLY__
-
-void init_sc520(void);
-unsigned long init_sc520_dram(void);
-void sc520_udelay(unsigned long usec);
-
-/* Memory mapped configuration registers */
-typedef struct sc520_mmcr {
- u16 revid; /* ElanSC520 microcontroller revision id */
- u8 cpuctl; /* am5x86 CPU control */
-
- u8 pad_0x003[0x0d];
-
- u8 drcctl; /* SDRAM control */
- u8 pad_0x011[0x01];
- u8 drctmctl; /* SDRAM timing control */
- u8 pad_0x013[0x01];
- u16 drccfg; /* SDRAM bank configuration*/
- u8 pad_0x016[0x02];
- u32 drcbendadr; /* SDRAM bank 0-3 ending address*/
- u8 pad_0x01c[0x04];
- u8 eccctl; /* ECC control */
- u8 eccsta; /* ECC status */
- u8 eccckbpos; /* ECC check bit position */
- u8 ecccktest; /* ECC Check Code Test */
- u32 eccsbadd; /* ECC single-bit error address */
- u32 eccmbadd; /* ECC multi-bit error address */
-
- u8 pad_0x02c[0x14];
-
- u8 dbctl; /* SDRAM buffer control */
-
- u8 pad_0x041[0x0f];
-
- u16 bootcsctl; /* /BOOTCS control */
- u8 pad_0x052[0x02];
- u16 romcs1ctl; /* /ROMCS1 control */
- u16 romcs2ctl; /* /ROMCS2 control */
-
- u8 pad_0x058[0x08];
-
- u16 hbctl; /* host bridge control */
- u16 hbtgtirqctl; /* host bridge target interrupt control */
- u16 hbtgtirqsta; /* host bridge target interrupt status */
- u16 hbmstirqctl; /* host bridge target interrupt control */
- u16 hbmstirqsta; /* host bridge master interrupt status */
- u8 pad_0x06a[0x02];
- u32 mstintadd; /* host bridge master interrupt address */
-
- u8 sysarbctl; /* system arbiter control */
- u8 pciarbsta; /* PCI bus arbiter status */
- u16 sysarbmenb; /* system arbiter master enable */
- u32 arbprictl; /* arbiter priority control */
-
- u8 pad_0x078[0x08];
-
- u8 adddecctl; /* address decode control */
- u8 pad_0x081[0x01];
- u16 wpvsta; /* write-protect violation status */
- u8 pad_0x084[0x04];
- u32 par[16]; /* programmable address regions */
-
- u8 pad_0x0c8[0x0b38];
-
- u8 gpecho; /* GP echo mode */
- u8 gpcsdw; /* GP chip select data width */
- u16 gpcsqual; /* GP chip select qualification */
- u8 pad_0xc04[0x4];
- u8 gpcsrt; /* GP chip select recovery time */
- u8 gpcspw; /* GP chip select pulse width */
- u8 gpcsoff; /* GP chip select offset */
- u8 gprdw; /* GP read pulse width */
- u8 gprdoff; /* GP read offset */
- u8 gpwrw; /* GP write pulse width */
- u8 gpwroff; /* GP write offset */
- u8 gpalew; /* GP ale pulse width */
- u8 gpaleoff; /* GP ale offset */
-
- u8 pad_0xc11[0x0f];
-
- u16 piopfs15_0; /* PIO15-PIO0 pin function select */
- u16 piopfs31_16; /* PIO31-PIO16 pin function select */
- u8 cspfs; /* chip select pin function select */
- u8 pad_0xc25[0x01];
- u8 clksel; /* clock select */
- u8 pad_0xc27[0x01];
- u16 dsctl; /* drive strength control */
- u16 piodir15_0; /* PIO15-PIO0 direction */
- u16 piodir31_16; /* PIO31-PIO16 direction */
- u8 pad_0xc2e[0x02];
- u16 piodata15_0 ; /* PIO15-PIO0 data */
- u16 piodata31_16; /* PIO31-PIO16 data */
- u16 pioset15_0; /* PIO15-PIO0 set */
- u16 pioset31_16; /* PIO31-PIO16 set */
- u16 pioclr15_0; /* PIO15-PIO0 clear */
- u16 pioclr31_16; /* PIO31-PIO16 clear */
-
- u8 pad_0xc3c[0x24];
-
- u16 swtmrmilli; /* software timer millisecond count */
- u16 swtmrmicro; /* software timer microsecond count */
- u8 swtmrcfg; /* software timer configuration */
-
- u8 pad_0xc65[0x0b];
-
- u8 gptmrsta; /* GP timers status register */
- u8 pad_0xc71;
- u16 gptmr0ctl; /* GP timer 0 mode/control */
- u16 gptmr0cnt; /* GP timer 0 count */
- u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */
- u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */
- u16 gptmr1ctl; /* GP timer 1 mode/control */
- u16 gptmr1cnt; /* GP timer 1 count */
- u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */
- u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/
- u16 gptmr2ctl; /* GP timer 2 mode/control */
- u16 gptmr2cnt; /* GP timer 2 count */
- u8 pad_0xc86[0x08];
- u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */
-
- u8 pad_0xc90[0x20];
-
- u16 wdtmrctl; /* watchdog timer control */
- u16 wdtmrcntl; /* watchdog timer count low */
- u16 wdtmrcnth; /* watchdog timer count high */
-
- u8 pad_0xcb6[0x0a];
-
- u8 uart1ctl; /* UART 1 general control */
- u8 uart1sta; /* UART 1 general status */
- u8 uart1fcrshad; /* UART 1 FIFO control shadow */
- u8 pad_0xcc3[0x01];
- u8 uart2ctl; /* UART 2 general control */
- u8 uart2sta; /* UART 2 general status */
- u8 uart2fcrshad; /* UART 2 FIFO control shadow */
-
- u8 pad_0xcc7[0x09];
-
- u8 ssictl; /* SSI control */
- u8 ssixmit; /* SSI transmit */
- u8 ssicmd; /* SSI command */
- u8 ssista; /* SSI status */
- u8 ssircv; /* SSI receive */
-
- u8 pad_0xcd5[0x2b];
-
- u8 picicr; /* interrupt control */
- u8 pad_0xd01[0x01];
- u8 pic_mode[3]; /* PIC interrupt mode */
- u8 pad_0xd05[0x03];
- u16 swint16_1; /* software interrupt 16-1 control */
- u8 swint22_17; /* software interrupt 22-17/NMI control */
- u8 pad_0xd0b[0x05];
- u16 intpinpol; /* interrupt pin polarity */
- u8 pad_0xd12[0x02];
- u16 pcihostmap; /* PCI host bridge interrupt mapping */
- u8 pad_0xd16[0x02];
- u16 eccmap; /* ECC interrupt mapping */
- u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */
- u8 pad_0xd1d[0x03];
- u8 pit_int_map[3]; /* PIT interrupt mapping */
- u8 pad_0xd23[0x05];
- u8 uart_int_map[2]; /* UART interrupt mapping */
- u8 pad_0xd2a[0x06];
- u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/
- u8 pad_0xd34[0x0c];
- u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */
- u8 ssimap; /* SSI interrupt mapping register */
- u8 wdtmap; /* watchdog timer interrupt mapping */
- u8 rtcmap; /* RTC interrupt mapping register */
- u8 wpvmap; /* write-protect interrupt mapping */
- u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */
- u8 ferrmap; /* floating point error interrupt mapping */
- u8 pad_0xd47[0x09];
- u8 gp_int_map[11]; /* GP IRQ interrupt mapping */
-
- u8 pad_0xd5b[0x15];
-
- u8 sysinfo; /* system board information */
- u8 pad_0xd71[0x01];
- u8 rescfg; /* reset configuration */
- u8 pad_0xd73[0x01];
- u8 ressta; /* reset status */
-
- u8 pad_0xd75[0x0b];
-
- u8 gpdmactl; /* GP-DMA Control */
- u8 gpdmammio; /* GP-DMA memory-mapped I/O */
- u16 gpdmaextchmapa; /* GP-DMA resource channel map a */
- u16 gpdmaextchmapb; /* GP-DMA resource channel map b */
- u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */
- u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */
- u8 pad_0xd8d[0x03];
- u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */
- u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */
- u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */
- u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */
- u8 pad_0xd94[0x4];
- u8 gpdmabcctl; /* buffer chaining control */
- u8 gpdmabcsta; /* buffer chaining status */
- u8 gpdmabsintenb; /* buffer chaining interrupt enable */
- u8 gpdmabcval; /* buffer chaining valid */
- u8 pad_0xd9c[0x04];
- u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */
- u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */
- u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */
- u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */
- u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */
- u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */
- u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */
- u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */
- u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */
- u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */
- u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */
- u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */
- u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */
- u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */
- u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */
- u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */
-
- u8 pad_0xdc0[0x0240];
-} sc520_mmcr_t;
-
-extern sc520_mmcr_t *sc520_mmcr;
-
-#endif
-
-/* Memory Mapped Control Registers (MMCR) Base Address */
-#define SC520_MMCR_BASE 0xfffef000
-
-/*
- * PARs for maximum allowable 256MB of SDRAM @ 0x00000000
- * Two PARs are required due to maximum PAR size of 128MB
- * These are used in the SDRAM sizing code to disable caching
- *
- * 111 0 0 0 1 11111111111 00000000000000 }- 0xe3ffc000
- * 111 0 0 0 1 11111111111 00100000000000 }- 0xe3ffc800
- * \ / | | | | \----+----/ \-----+------/
- * | | | | | | +---------- Start at 0x00000000
- * | | | | | | 0x08000000
- * | | | | | +----------------------- 128MB Region Size
- * | | | | | ((2047 + 1) * 64kB)
- * | | | | +------------------------------ 64kB Page Size
- * | | | +-------------------------------- Writes Enabled
- * | | +---------------------------------- Caching Enabled
- * | +------------------------------------ Execution Enabled
- * +--------------------------------------- SDRAM
- */
-#define SC520_SDRAM1_PAR 0xe3ffc000
-#define SC520_SDRAM2_PAR 0xe3ffc800
-
-#define SC520_PAR_WRITE_DIS 0x04000000
-#define SC520_PAR_CACHE_DIS 0x08000000
-#define SC520_PAR_EXEC_DIS 0x10000000
-
-/*
- * Programmable Address Regions to cover 256MB SDRAM (Maximum supported)
- * required for DRAM sizing code
- */
-
-/* MMCR Register bits (not all of them :) ) */
-
-/* SSI Stuff */
-#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */
-#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */
-#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */
-#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */
-#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */
-#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */
-#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */
-#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */
-
-#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */
-#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */
-#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */
-#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */
-
-#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */
-#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */
-#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */
-#define SSISTA_BSY 0x02 /* SSI Busy */
-#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */
-
-/* BITS for SC520_ADDDECCTL: */
-#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */
-#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */
-#define RTC_DIS 0x04 /* RTC Disable */
-#define UART2_DIS 0x02 /* UART2 Disable */
-#define UART1_DIS 0x01 /* UART1 Disable */
-
-/*
- * Defines used for SDRAM Sizing (number of columns and rows)
- * Refer to section 10.6.4 - SDRAM Sizing Algorithm in the
- * Elan SC520 Microcontroller User's Manual (Order #22004B)
- */
-#define CACHELINESZ 0x00000010
-
-#define COL11_ADR 0x0e001e00
-#define COL10_ADR 0x0e000e00
-#define COL09_ADR 0x0e000600
-#define COL08_ADR 0x0e000200
-#define COL11_DATA 0x0b0b0b0b
-#define COL10_DATA 0x0a0a0a0a
-#define COL09_DATA 0x09090909
-#define COL08_DATA 0x08080808
-
-#define ROW14_ADR 0x0f000000
-#define ROW13_ADR 0x07000000
-#define ROW12_ADR 0x03000000
-#define ROW11_ADR 0x01000000
-#define ROW10_ADR 0x00000000
-#define ROW14_DATA 0x3f3f3f3f
-#define ROW13_DATA 0x1f1f1f1f
-#define ROW12_DATA 0x0f0f0f0f
-#define ROW11_DATA 0x07070707
-#define ROW10_DATA 0xaaaaaaaa
-
-/* 0x28000000 - 0x3fffffff is used by the flash banks */
-
-/* 0x40000000 - 0xffffffff is not adressable by the SC520 */
-
-/* priority numbers used for interrupt channel mappings */
-#define SC520_IRQ_DISABLED 0
-#define SC520_IRQ0 1
-#define SC520_IRQ1 2
-#define SC520_IRQ2 4 /* same as IRQ9 */
-#define SC520_IRQ3 11
-#define SC520_IRQ4 12
-#define SC520_IRQ5 13
-#define SC520_IRQ6 21
-#define SC520_IRQ7 22
-#define SC520_IRQ8 3
-#define SC520_IRQ9 4
-#define SC520_IRQ10 5
-#define SC520_IRQ11 6
-#define SC520_IRQ12 7
-#define SC520_IRQ13 8
-#define SC520_IRQ14 9
-#define SC520_IRQ15 10
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Graeme Russ <graeme.russ@gmail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SSI_H_
-#define _ASM_IC_SSI_H_ 1
-
-int ssi_set_interface(int, int, int, int);
-void ssi_chip_select(int);
-u8 ssi_txrx_byte(u8);
-void ssi_tx_byte(u8);
-u8 ssi_rx_byte(void);
-
-
-#endif
projects / u-boot.git / commitdiff
