-/*
- * Copyright 2016 Beckhoff Automation
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
#include "imx53-pinfunc.h"
#include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
aliases {
- serial1 = &uart2;
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
mmc1 = &esdhc2;
mmc2 = &esdhc3;
mmc3 = &esdhc4;
- usb1 = &usbh1;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &cspi;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ clocks = <&clks IMX5_CLK_ARM>;
+ clock-latency = <61036>;
+ voltage-tolerance = <5>;
+ operating-points = <
+ /* kHz */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ 1200000 1300000
+ >;
+ };
+ };
+
+ display-subsystem {
+ compatible = "fsl,imx-display-subsystem";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
+ capture_subsystem {
+ compatible = "fsl,imx-capture-subsystem";
+ ports = <&ipu_csi0>, <&ipu_csi1>;
};
tzic: tz-interrupt-controller@fffc000 {
reg = <0x0fffc000 0x4000>;
};
+ clocks {
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupt-parent = <&tzic>;
+ interrupts = <77>;
+ };
+
+ usbphy0: usbphy-0 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy-1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ status = "okay";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
- u-boot,dm-pre-reloc;
+
+ sata: sata@10000000 {
+ compatible = "fsl,imx53-ahci";
+ reg = <0x10000000 0x1000>;
+ interrupts = <28>;
+ clocks = <&clks IMX5_CLK_SATA_GATE>,
+ <&clks IMX5_CLK_SATA_REF>,
+ <&clks IMX5_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
+ ipu: ipu@18000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ipu";
+ reg = <0x18000000 0x08000000>;
+ interrupts = <11 10>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
+ clock-names = "bus", "di0", "di1";
+ resets = <&src 2>;
+
+ ipu_csi0: port@0 {
+ reg = <0>;
+
+ ipu_csi0_from_parallel_sensor: endpoint {
+ };
+ };
+
+ ipu_csi1: port@1 {
+ reg = <1>;
+
+ ipu_csi1_from_parallel_sensor: endpoint {
+ };
+ };
+
+ ipu_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di0_lvds0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ ipu_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di1_lvds1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds1_in>;
+ };
+
+ ipu_di1_tve: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tve_in>;
+ };
+ };
+ };
+
+ gpu: gpu@30000000 {
+ compatible = "amd,imageon-200.0", "amd,imageon";
+ reg = <0x30000000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <12>;
+ interrupt-names = "kgsl_3d0_irq";
+ clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+ clock-names = "core_clk", "mem_iface_clk";
+ };
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
status = "disabled";
};
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ecspi1: spi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+ <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
};
};
- iomuxc: iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc";
- reg = <0x53fa8000 0x4000>;
- };
-
- gpr: iomuxc-gpr@53fa8000 {
- compatible = "fsl,imx53-iomuxc-gpr", "syscon";
- reg = <0x53fa8000 0xc>;
+ aipstz1: bridge@53f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x53f00000 0x60>;
};
- uart2: serial@53fc0000 {
- compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart";
- reg = <0x53fc0000 0x4000>;
- interrupts = <32>;
- clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
- clock-names = "ipg", "per";
- dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
- dma-names = "rx", "tx";
+ usbotg: usb@53f80000 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 1>;
+ fsl,usbphy = <&usbphy1>;
dr_mode = "host";
status = "disabled";
};
- clks: ccm@53fd4000{
- compatible = "fsl,imx53-ccm";
- reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
+ usbh2: usb@53f80400 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbh3: usb@53f80600 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53f80800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx53-usbmisc";
+ reg = <0x53f80800 0x200>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@53f84000 {
#interrupt-cells = <2>;
};
+ kpp: kpp@53f94000 {
+ compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@53f98000 {
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ };
+
+ wdog2: wdog@53f9c000 {
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ gpt: timer@53fa0000 {
+ compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+ reg = <0x53fa0000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
+ clock-names = "ipg", "per";
+ };
+
+ srtc: rtc@53fa4000 {
+ compatible = "fsl,imx53-rtc";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <24>;
+ clocks = <&clks IMX5_CLK_SRTC_GATE>;
+ };
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ ldb: ldb@53fa8008 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ldb";
+ reg = <0x53fa8008 0x4>;
+ gpr = <&gpr>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel",
+ "di0", "di1";
+ status = "disabled";
+
+ lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+ };
+
+ lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "disabled";
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
+ uart1: serial@53fbc000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: can@53fcc000 {
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <83>;
+ clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ src: src@53fd0000 {
+ compatible = "fsl,imx53-src", "fsl,imx51-src";
+ reg = <0x53fd0000 0x4000>;
+ #reset-cells = <1>;
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
+
+ uart4: serial@53ff0000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
};
aips@60000000 { /* AIPS2 */
reg = <0x60000000 0x10000000>;
ranges;
+ aipstz2: bridge@63f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x63f00000 0x60>;
+ };
+
+ iim: iim@63f98000 {
+ compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+ reg = <0x63f98000 0x4000>;
+ interrupts = <69>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
+ };
+
+ uart5: serial@63f90000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ tigerp: tigerp@63fa0000 {
+ compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+ reg = <0x63fa0000 0x28>;
+ };
+
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+ status = "disabled";
+ };
+
+ ecspi2: spi@63fac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- fec: ethernet@63fec000 {
- compatible = "fsl,imx53-fec", "fsl,imx25-fec";
- reg = <0x63fec000 0x4000>;
- interrupts = <87>;
- clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
- clock-names = "ipg", "ahb", "ptp";
+ cspi: spi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ clock-names = "ipg", "per";
status = "disabled";
};
clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
- };
-
- ipu: ipu@18000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ipu";
- reg = <0x18000000 0x08000000>;
- interrupts = <11 10>;
- clocks = <&clks IMX5_CLK_IPU_GATE>,
- <&clks IMX5_CLK_IPU_DI0_GATE>,
- <&clks IMX5_CLK_IPU_DI1_GATE>;
- clock-names = "bus", "di0", "di1";
- resets = <&src 2>;
- u-boot,dm-pre-reloc;
- ipu_csi0: port@0 {
- reg = <0>;
+ ssi1: ssi@63fcc000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+ <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
};
- ipu_csi1: port@1 {
- reg = <1>;
+ audmux: audmux@63fd0000 {
+ compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
};
- ipu_di0: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- ipu_di0_disp0: endpoint@0 {
- reg = <0>;
- };
-
- ipu_di0_lvds0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&lvds0_in>;
- };
+ nfc: nand@63fdb000 {
+ compatible = "fsl,imx53-nand";
+ reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+ interrupts = <8>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
+ status = "disabled";
};
- ipu_di1: port@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- ipu_di1_disp1: endpoint@0 {
- reg = <0>;
- };
-
- ipu_di1_lvds1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&lvds1_in>;
- };
+ ssi3: ssi@63fe8000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fe8000 0x4000>;
+ interrupts = <96>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+ <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 46 0 0>,
+ <&sdma 47 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
- ipu_di1_tve: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&tve_in>;
- };
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
};
- };
- tve: tve@63ff0000 {
+ tve: tve@63ff0000 {
compatible = "fsl,imx53-tve";
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
remote-endpoint = <&ipu_di1_tve>;
};
};
- };
-
- src: src@53fd0000 {
- compatible = "fsl,imx53-src", "fsl,imx51-src";
- reg = <0x53fd0000 0x4000>;
- #reset-cells = <1>;
- };
-
- ldb: ldb@53fa8008 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ldb";
- reg = <0x53fa8008 0x4>;
- gpr = <&gpr>;
- clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
- <&clks IMX5_CLK_LDB_DI1_SEL>,
- <&clks IMX5_CLK_IPU_DI0_SEL>,
- <&clks IMX5_CLK_IPU_DI1_SEL>,
- <&clks IMX5_CLK_LDB_DI0_GATE>,
- <&clks IMX5_CLK_LDB_DI1_GATE>;
- clock-names = "di0_pll", "di1_pll",
- "di0_sel", "di1_sel",
- "di0", "di1";
- status = "disabled";
-
- lvds-channel@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- status = "disabled";
-
- port@0 {
- reg = <0>;
-
- lvds0_in: endpoint {
- remote-endpoint = <&ipu_di0_lvds0>;
- };
- };
-
- port@2 {
- reg = <2>;
- };
- };
-
- lvds-channel@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- status = "disabled";
+ };
- port@1 {
- reg = <1>;
+ vpu: vpu@63ff4000 {
+ compatible = "fsl,imx53-vpu", "cnm,coda7541";
+ reg = <0x63ff4000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+ <&clks IMX5_CLK_VPU_GATE>;
+ clock-names = "per", "ahb";
+ resets = <&src 1>;
+ iram = <&ocram>;
+ };
- lvds1_in: endpoint {
- remote-endpoint = <&ipu_di1_lvds1>;
- };
- };
+ sahara: crypto@63ff8000 {
+ compatible = "fsl,imx53-sahara";
+ reg = <0x63ff8000 0x4000>;
+ interrupts = <19 20>;
+ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+ <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+ clock-names = "ipg", "ahb";
+ };
+ };
- port@2 {
- reg = <2>;
- };
- };
+ ocram: sram@f8000000 {
+ compatible = "mmio-sram";
+ reg = <0xf8000000 0x20000>;
+ clocks = <&clks IMX5_CLK_OCRAM>;
};
};
};
projects / u-boot.git / commitdiff
