CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_AM43XX=y
CONFIG_ENV_OFFSET_REDUND=0x120000
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI,QSPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="QSPI,QSPI_BOOT"
CONFIG_QSPI_BOOT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_BAV_VERSION=1
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_BAV_VERSION=2
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_MTD_UBI_BEB_LIMIT=22
CONFIG_MT7628_ETH=y
CONFIG_PHY=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_SPI=y
CONFIG_MT7621_SPI=y
CONFIG_WDT=y
CONFIG_MT7628_ETH=y
CONFIG_PHY=y
CONFIG_MT76X8_USB_PHY=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_CONS_INDEX=3
CONFIG_SPI=y
CONFIG_MT7621_SPI=y
CONFIG_USB=y
CONFIG_RTC_PCF2127=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SPI=y
CONFIG_MSCC_JR2_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_MSCC_LUTON_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_MSCC_SERVAL_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_MSCC_SERVALT_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_MT7628_ETH=y
-# CONFIG_SPECIFY_CONSOLE_INDEX is not set
CONFIG_SPI=y
CONFIG_MT7621_SPI=y
CONFIG_LZMA=y
CONFIG_PCI_MVEBU=y
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
* for your console driver.
*/
-#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* for your console driver.
*/
-#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
/* SPI Flash */
/* Environment */
-
-#define CONFIG_CONS_INDEX 1
#endif /* __CONFIG_BRSMARC1_H__ */
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
/*
* Environment variables configurations
#define CONFIG_SYS_NS16550_CLK 40000000
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0xb0000c00
-#define CONFIG_CONS_INDEX 1
#endif
/* UART */
#define CONFIG_SYS_NS16550_CLK 40000000
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM3 0xb0000e00
-#define CONFIG_CONS_INDEX 3
#endif
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
/* Serial Port */
-#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#endif
/* Serial Port */
-#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
#define CONFIG_SYS_NS16550_CLK 40000000
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0xb0000c00
-#define CONFIG_CONS_INDEX 1
#endif
/* Serial common */
#error Unknown DDR size - please add!
#endif
-#define CONFIG_CONS_INDEX 1
-
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
#define CONFIG_SYS_NS16550_CLK 40000000
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM3 0xb0000e00
-#define CONFIG_CONS_INDEX 3
/* RAM */
* for your console driver.
*/
-#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-
/* NAND */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE 1