siemens,am335x: clean-up draco targets

Draco is a family of 3 boards: thuban, rastaban & etamin. Rename all
targets of the family adding the draco- prefix to increase readibility
and simplify future commits about concerning all boards of the family.

The name draco was initially used for the first target. It's deprecated
since a 2nd target was introduced. Unfortunately the draco target was
copied to the thuban target instead to be renamed. Remove it to save
unnecessary maintenance effort.

Signed-off-by: Enrico Leto <enrico.leto@siemens.com>

diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 8cb0c57163b1b13df18d05fb420252607a1342d9..bd5129b04e0be93262e9948b40b06759b918645b 100644 (file)
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -105,15 +105,6 @@ config TARGET_CHILIBOARD
        select DM_SERIAL
        imply CMD_DM
 
-config TARGET_DRACO
-       bool "Support draco"
-       select BOARD_LATE_INIT
-       select DM
-       select DM_GPIO
-       select DM_SERIAL
-       select FACTORYSET
-       imply CMD_DM
-
 config TARGET_ETAMIN
        bool "Support etamin"
        select BOARD_LATE_INIT

diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig
index 1eb8a4886f4cb697a57c6a29dc3e33890198b36b..0cdf5bc981206c6c781b02a5fc9160a95f1aa33b 100644 (file)
--- a/board/siemens/draco/Kconfig
+++ b/board/siemens/draco/Kconfig
@@ -1,19 +1,3 @@
-if TARGET_DRACO
-
-config SYS_BOARD
-       default "draco"
-
-config SYS_VENDOR
-       default "siemens"
-
-config SYS_SOC
-       default "am33xx"
-
-config SYS_CONFIG_NAME
-       default "draco"
-
-endif
-
 if TARGET_THUBAN
 
 config SYS_BOARD
@@ -26,7 +10,7 @@ config SYS_SOC
        default "am33xx"
 
 config SYS_CONFIG_NAME
-       default "thuban"
+       default "draco-thuban"
 
 endif
 
@@ -42,7 +26,7 @@ config SYS_SOC
        default "am33xx"
 
 config SYS_CONFIG_NAME
-       default "rastaban"
+       default "draco-rastaban"
 
 endif
 
@@ -58,7 +42,7 @@ config SYS_SOC
         default "am33xx"
 
 config SYS_CONFIG_NAME
-        default "etamin"
+        default "draco-etamin"
 
 config NAND_CS_INIT
        def_bool y

diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS
index c73f18c002f43eda22061be3babe9232d7731997..82e01eb62ed4da5351fa5010913b5796e4ca9b30 100644 (file)
--- a/board/siemens/draco/MAINTAINERS
+++ b/board/siemens/draco/MAINTAINERS
@@ -1,11 +1,10 @@
 DRACO BOARD
-M:     Samuel Egli <samuel.egli@siemens.com>
+M:     Enrico Leto <enrico.leto@siemens.com>
 S:     Maintained
 F:     board/siemens/draco/
-F:     include/configs/draco.h
-F:     configs/draco_defconfig
-F:     configs/etamin_defconfig
-F:     include/configs/thuban.h
-F:     configs/thuban_defconfig
-F:     include/configs/rastaban.h
-F:     configs/rastaban_defconfig
+F:     configs/draco-etamin_defconfig
+F:     configs/draco-rastaban_defconfig
+F:     configs/draco-thuban_defconfig
+F:     include/configs/draco-etamin.h
+F:     include/configs/draco-rastaban.h
+F:     include/configs/draco-thuban.h

diff --git a/configs/etamin_defconfig b/configs/draco-etamin_defconfig
similarity index 100%
rename from configs/etamin_defconfig
rename to configs/draco-etamin_defconfig

diff --git a/configs/rastaban_defconfig b/configs/draco-rastaban_defconfig
similarity index 100%
rename from configs/rastaban_defconfig
rename to configs/draco-rastaban_defconfig

diff --git a/configs/thuban_defconfig b/configs/draco-thuban_defconfig
similarity index 100%
rename from configs/thuban_defconfig
rename to configs/draco-thuban_defconfig

diff --git a/configs/draco_defconfig b/configs/draco_defconfig
deleted file mode 100644 (file)
index 2a82087..0000000
--- a/configs/draco_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
-CONFIG_ENV_SIZE=0x2000
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
-CONFIG_AM33XX=y
-CONFIG_SYS_MPUCLK=300
-CONFIG_TARGET_DRACO=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2E0000
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_BOOT_RETRY=y
-CONFIG_BOOT_RETRY_TIME=60
-CONFIG_RESET_TO_RETRY=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_BSS_START_ADDR=0x80000000
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
-CONFIG_SPL_I2C=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
-CONFIG_SPL_WATCHDOG=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_SYS_MAXARGS=32
-CONFIG_SYS_PBSIZE=1049
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_DNS2=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),512k(u-boot.env0),512k(u-boot.env1),512k(mtdoops),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RANGE=0x80000
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_USE_ROOTPATH=y
-CONFIG_ROOTPATH="/opt/eldk"
-CONFIG_SPL_DM=y
-# CONFIG_SPL_BLK is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_DFU_NAND=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-# CONFIG_SPL_DM_MMC is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
-CONFIG_PHY_SMSC=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0908
-CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y

diff --git a/include/configs/etamin.h b/include/configs/draco-etamin.h
similarity index 100%
rename from include/configs/etamin.h
rename to include/configs/draco-etamin.h

diff --git a/include/configs/rastaban.h b/include/configs/draco-rastaban.h
similarity index 100%
rename from include/configs/rastaban.h
rename to include/configs/draco-rastaban.h

diff --git a/include/configs/thuban.h b/include/configs/draco-thuban.h
similarity index 100%
rename from include/configs/thuban.h
rename to include/configs/draco-thuban.h

diff --git a/include/configs/draco.h b/include/configs/draco.h
deleted file mode 100644 (file)
index 8f993ce..0000000
--- a/include/configs/draco.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * U-Boot file:/include/configs/am335x_evm.h
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#ifndef __CONFIG_DRACO_H
-#define __CONFIG_DRACO_H
-
-#include "siemens-am33x-common.h"
-
-#define DDR_PLL_FREQ   303
-
-#define BOARD_DFU_BUTTON_GPIO  27      /* Use as default */
-#define GPIO_LAN9303_NRST      88      /* GPIO2_24 = gpio88 */
-
-#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
-       "button_dfu0=27\0" \
-       "led0=103,1,0\0" \
-       "led1=64,0,1\0"
-
- /* Physical Memory Map */
-#define CFG_MAX_RAM_BANK_SIZE  (1024 << 20)    /* 1GB */
-
-/* Default env settings */
-#define CFG_EXTRA_ENV_SETTINGS \
-       "hostname=draco\0" \
-       "ubi_off=2048\0"\
-       "nand_img_size=0x400000\0" \
-       "optargs=\0" \
-       "preboot=draco_led 0\0" \
-       CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
-       CFG_ENV_SETTINGS_V2 \
-       CFG_ENV_SETTINGS_NAND_V2
-
-#endif /* ! __CONFIG_DRACO_H */