bdinfo: arm: Use the generic bd command

Unfortunately ARM has a lot of special stuff. Move it into the generic
function for now, so we can have it all in one place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 9585d6a37aefe0c3c64576c3d6bcec92608700fa..996fb5d06fa893a23f1e36b7e9328589a4e1dacd 100644 (file)
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -193,64 +193,7 @@ static inline void __maybe_unused print_std_bdinfo(const bd_t *bd)
 
 #elif defined(CONFIG_ARM)
 
-static int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc,
-                    char *const argv[])
-{
-       bd_t *bd = gd->bd;
-
-       print_num("arch_number",        bd->bi_arch_number);
-       print_bi_boot_params(bd);
-       print_bi_dram(bd);
-
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-       if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
-               print_num("Secure ram",
-                         gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
-       }
-#endif
-#ifdef CONFIG_RESV_RAM
-       if (gd->arch.resv_ram)
-               print_num("Reserved ram", gd->arch.resv_ram);
-#endif
-#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
-       print_eths();
-#endif
-       print_baudrate();
-#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
-       print_num("TLB addr", gd->arch.tlb_addr);
-#endif
-       print_num("relocaddr", gd->relocaddr);
-       print_num("reloc off", gd->reloc_off);
-       print_num("irq_sp", gd->irq_sp);        /* irq stack pointer */
-       print_num("sp start ", gd->start_addr_sp);
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
-       print_num("FB base  ", gd->fb_base);
-#endif
-       /*
-        * TODO: Currently only support for davinci SOC's is added.
-        * Remove this check once all the board implement this.
-        */
-#ifdef CONFIG_CLOCKS
-       printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
-       printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
-       printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
-#endif
-#ifdef CONFIG_BOARD_TYPES
-       printf("Board Type  = %ld\n", gd->board_type);
-#endif
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-       printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
-              CONFIG_VAL(SYS_MALLOC_F_LEN));
-#endif
-#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
-       print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
-#endif
-       if (gd->fdt_blob)
-               print_num("fdt_blob", (ulong)gd->fdt_blob);
-       print_cpu_word_size();
-
-       return 0;
-}
+#define USE_GENERIC
 
 #elif defined(CONFIG_SH)
 
@@ -308,6 +251,8 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 #ifdef DEBUG
        print_num("bd address", (ulong)bd);
 #endif
+       if (IS_ENABLED(CONFIG_ARM))
+               print_num("arch_number", bd->bi_arch_number);
        print_bi_dram(bd);
        print_std_bdinfo(bd);
        print_num("relocaddr", gd->relocaddr);
@@ -319,6 +264,47 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
        print_num("fdt_blob", (ulong)gd->fdt_blob);
        print_num("new_fdt", (ulong)gd->new_fdt);
        print_num("fdt_size", (ulong)gd->fdt_size);
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
+       print_num("FB base  ", gd->fb_base);
+#endif
+
+       /* This section is used only by ARM */
+#ifdef CONFIG_ARM
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+       if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
+               print_num("Secure ram",
+                         gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
+       }
+#endif
+#ifdef CONFIG_RESV_RAM
+       if (gd->arch.resv_ram)
+               print_num("Reserved ram", gd->arch.resv_ram);
+#endif
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+       print_num("TLB addr", gd->arch.tlb_addr);
+#endif
+       print_num("irq_sp", gd->irq_sp);        /* irq stack pointer */
+       print_num("sp start ", gd->start_addr_sp);
+       /*
+        * TODO: Currently only support for davinci SOC's is added.
+        * Remove this check once all the board implement this.
+        */
+#ifdef CONFIG_CLOCKS
+       printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
+       printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
+       printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
+#endif
+#ifdef CONFIG_BOARD_TYPES
+       printf("Board Type  = %ld\n", gd->board_type);
+#endif
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+       printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
+              CONFIG_VAL(SYS_MALLOC_F_LEN));
+#endif
+#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
+       print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
+#endif
+#endif /* CONFIG_ARM */
 
        /* This section is used only by ppc */
 #if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)