--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <misc.h>
+#include <asm/io.h>
+#include <linux/iopoll.h>
+
+#define BSEC_OTP_MAX_VALUE 95
+
+#define BSEC_TIMEOUT_US 10000
+
+/* BSEC REGISTER OFFSET (base relative) */
+#define BSEC_OTP_CONF_OFF 0x000
+#define BSEC_OTP_CTRL_OFF 0x004
+#define BSEC_OTP_WRDATA_OFF 0x008
+#define BSEC_OTP_STATUS_OFF 0x00C
+#define BSEC_OTP_LOCK_OFF 0x010
+#define BSEC_DISTURBED_OFF 0x01C
+#define BSEC_ERROR_OFF 0x034
+#define BSEC_SPLOCK_OFF 0x064 /* Program safmem sticky lock */
+#define BSEC_SWLOCK_OFF 0x07C /* write in OTP sticky lock */
+#define BSEC_SRLOCK_OFF 0x094 /* shadowing sticky lock */
+#define BSEC_OTP_DATA_OFF 0x200
+
+/* BSEC_CONFIGURATION Register MASK */
+#define BSEC_CONF_POWER_UP 0x001
+
+/* BSEC_CONTROL Register */
+#define BSEC_READ 0x000
+#define BSEC_WRITE 0x100
+
+/* LOCK Register */
+#define OTP_LOCK_MASK 0x1F
+#define OTP_LOCK_BANK_SHIFT 0x05
+#define OTP_LOCK_BIT_MASK 0x01
+
+/* STATUS Register */
+#define BSEC_MODE_BUSY_MASK 0x08
+#define BSEC_MODE_PROGFAIL_MASK 0x10
+#define BSEC_MODE_PWR_MASK 0x20
+
+/*
+ * OTP Lock services definition
+ * Value must corresponding to the bit number in the register
+ */
+#define BSEC_LOCK_PROGRAM 0x04
+
+/**
+ * bsec_check_error() - Check status of one otp
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error, -EAGAIN or -ENOTSUPP
+ */
+static u32 bsec_check_error(u32 base, u32 otp)
+{
+ u32 bit;
+ u32 bank;
+
+ bit = 1 << (otp & OTP_LOCK_MASK);
+ bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
+
+ if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
+ return -EAGAIN;
+ else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
+ return -ENOTSUPP;
+
+ return 0;
+}
+
+/**
+ * bsec_lock() - manage lock for each type SR/SP/SW
+ * @address: address of bsec IP register
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_lock(u32 address, u32 otp)
+{
+ u32 bit;
+ u32 bank;
+
+ bit = 1 << (otp & OTP_LOCK_MASK);
+ bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
+
+ return !!(readl(address + bank) & bit);
+}
+
+/**
+ * bsec_read_SR_lock() - read SR lock (Shadowing)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SR_lock(u32 base, u32 otp)
+{
+ return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
+}
+
+/**
+ * bsec_read_SP_lock() - read SP lock (program Lock)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SP_lock(u32 base, u32 otp)
+{
+ return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
+}
+
+/**
+ * bsec_SW_lock() - manage SW lock (Write in Shadow)
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: true if locked else false
+ */
+static bool bsec_read_SW_lock(u32 base, u32 otp)
+{
+ return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
+}
+
+/**
+ * bsec_power_safmem() - Activate or deactivate safmem power
+ * @base: base address of bsec IP
+ * @power: true to power up , false to power down
+ * Return: 0 if succeed
+ */
+static int bsec_power_safmem(u32 base, bool power)
+{
+ u32 val;
+ u32 mask;
+
+ if (power) {
+ setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
+ mask = BSEC_MODE_PWR_MASK;
+ } else {
+ clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
+ mask = 0;
+ }
+
+ /* waiting loop */
+ return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+ val, (val & BSEC_MODE_PWR_MASK) == mask,
+ BSEC_TIMEOUT_US);
+}
+
+/**
+ * bsec_shadow_register() - copy safmen otp to bsec data
+ * @base: base address of bsec IP
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_shadow_register(u32 base, u32 otp)
+{
+ u32 val;
+ int ret;
+ bool power_up = false;
+
+ /* check if shadowing of otp is locked */
+ if (bsec_read_SR_lock(base, otp))
+ pr_debug("bsec : OTP %d is locked and refreshed with 0\n", otp);
+
+ /* check if safemem is power up */
+ val = readl(base + BSEC_OTP_STATUS_OFF);
+ if (!(val & BSEC_MODE_PWR_MASK)) {
+ ret = bsec_power_safmem(base, true);
+ if (ret)
+ return ret;
+ power_up = 1;
+ }
+ /* set BSEC_OTP_CTRL_OFF with the otp value*/
+ writel(otp | BSEC_READ, base + BSEC_OTP_CTRL_OFF);
+
+ /* check otp status*/
+ ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+ val, (val & BSEC_MODE_BUSY_MASK) == 0,
+ BSEC_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ ret = bsec_check_error(base, otp);
+
+ if (power_up)
+ bsec_power_safmem(base, false);
+
+ return ret;
+}
+
+/**
+ * bsec_read_shadow() - read an otp data value from shadow
+ * @base: base address of bsec IP
+ * @val: read value
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_read_shadow(u32 base, u32 *val, u32 otp)
+{
+ *val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
+
+ return bsec_check_error(base, otp);
+}
+
+/**
+ * bsec_write_shadow() - write value in BSEC data register in shadow
+ * @base: base address of bsec IP
+ * @val: value to write
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * Return: 0 if no error
+ */
+static int bsec_write_shadow(u32 base, u32 val, u32 otp)
+{
+ /* check if programming of otp is locked */
+ if (bsec_read_SW_lock(base, otp))
+ pr_debug("bsec : OTP %d is lock, write will be ignore\n", otp);
+
+ writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
+
+ return bsec_check_error(base, otp);
+}
+
+/**
+ * bsec_program_otp() - program a bit in SAFMEM
+ * @base: base address of bsec IP
+ * @val: value to program
+ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
+ * after the function the otp data is not refreshed in shadow
+ * Return: 0 if no error
+ */
+static int bsec_program_otp(long base, u32 val, u32 otp)
+{
+ u32 ret;
+ bool power_up = false;
+
+ if (bsec_read_SP_lock(base, otp))
+ pr_debug("bsec : OTP %d locked, prog will be ignore\n", otp);
+
+ if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
+ pr_debug("bsec : Global lock, prog will be ignore\n");
+
+ /* check if safemem is power up */
+ if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
+ ret = bsec_power_safmem(base, true);
+ if (ret)
+ return ret;
+
+ power_up = true;
+ }
+ /* set value in write register*/
+ writel(val, base + BSEC_OTP_WRDATA_OFF);
+
+ /* set BSEC_OTP_CTRL_OFF with the otp value */
+ writel(otp | BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);
+
+ /* check otp status*/
+ ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
+ val, (val & BSEC_MODE_BUSY_MASK) == 0,
+ BSEC_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ if (val & BSEC_MODE_PROGFAIL_MASK)
+ ret = -EACCES;
+ else
+ ret = bsec_check_error(base, otp);
+
+ if (power_up)
+ bsec_power_safmem(base, false);
+
+ return ret;
+}
+
+/* BSEC MISC driver *******************************************************/
+struct stm32mp_bsec_platdata {
+ u32 base;
+};
+
+static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
+{
+ struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
+ u32 tmp_data = 0;
+ int ret;
+
+ /* read current shadow value */
+ ret = bsec_read_shadow(plat->base, &tmp_data, otp);
+ if (ret)
+ return ret;
+
+ /* copy otp in shadow */
+ ret = bsec_shadow_register(plat->base, otp);
+ if (ret)
+ return ret;
+
+ ret = bsec_read_shadow(plat->base, val, otp);
+ if (ret)
+ return ret;
+
+ /* restore shadow value */
+ ret = bsec_write_shadow(plat->base, tmp_data, otp);
+ return ret;
+}
+
+static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
+{
+ struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
+
+ return bsec_read_shadow(plat->base, val, otp);
+}
+
+static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
+{
+ struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
+
+ return bsec_program_otp(plat->base, val, otp);
+}
+
+static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
+{
+ struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
+
+ return bsec_write_shadow(plat->base, val, otp);
+}
+
+static int stm32mp_bsec_read(struct udevice *dev, int offset,
+ void *buf, int size)
+{
+ int ret;
+ int i;
+ bool shadow = true;
+ int nb_otp = size / sizeof(u32);
+ int otp;
+
+ if (offset >= STM32_BSEC_OTP_OFFSET) {
+ offset -= STM32_BSEC_OTP_OFFSET;
+ shadow = false;
+ }
+ otp = offset / sizeof(u32);
+
+ if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) {
+ dev_err(dev, "wrong value for otp, max value : %i\n",
+ BSEC_OTP_MAX_VALUE);
+ return -EINVAL;
+ }
+
+ for (i = otp; i < (otp + nb_otp); i++) {
+ u32 *addr = &((u32 *)buf)[i - otp];
+
+ if (shadow)
+ ret = stm32mp_bsec_read_shadow(dev, addr, i);
+ else
+ ret = stm32mp_bsec_read_otp(dev, addr, i);
+
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
+static int stm32mp_bsec_write(struct udevice *dev, int offset,
+ const void *buf, int size)
+{
+ int ret = 0;
+ int i;
+ bool shadow = true;
+ int nb_otp = size / sizeof(u32);
+ int otp;
+
+ if (offset >= STM32_BSEC_OTP_OFFSET) {
+ offset -= STM32_BSEC_OTP_OFFSET;
+ shadow = false;
+ }
+ otp = offset / sizeof(u32);
+
+ if (otp < 0 || (otp + nb_otp - 1) > BSEC_OTP_MAX_VALUE) {
+ dev_err(dev, "wrong value for otp, max value : %d\n",
+ BSEC_OTP_MAX_VALUE);
+ return -EINVAL;
+ }
+
+ for (i = otp; i < otp + nb_otp; i++) {
+ u32 *val = &((u32 *)buf)[i - otp];
+
+ if (shadow)
+ ret = stm32mp_bsec_write_shadow(dev, *val, i);
+ else
+ ret = stm32mp_bsec_write_otp(dev, *val, i);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
+static const struct misc_ops stm32mp_bsec_ops = {
+ .read = stm32mp_bsec_read,
+ .write = stm32mp_bsec_write,
+};
+
+static int stm32mp_bsec_ofdata_to_platdata(struct udevice *dev)
+{
+ struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev);
+
+ plat->base = (u32)dev_read_addr_ptr(dev);
+
+ return 0;
+}
+
+static const struct udevice_id stm32mp_bsec_ids[] = {
+ { .compatible = "st,stm32mp-bsec" },
+ {}
+};
+
+U_BOOT_DRIVER(stm32mp_bsec) = {
+ .name = "stm32mp_bsec",
+ .id = UCLASS_MISC,
+ .of_match = stm32mp_bsec_ids,
+ .ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata),
+ .ops = &stm32mp_bsec_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+/* bsec IP is not present in device tee, manage IP address by platdata */
+static struct stm32mp_bsec_platdata stm32_bsec_platdata = {
+ .base = STM32_BSEC_BASE,
+};
+
+U_BOOT_DEVICE(stm32mp_bsec) = {
+ .name = "stm32mp_bsec",
+ .platdata = &stm32_bsec_platdata,
+};
projects / u-boot.git / commitdiff
