powerpc/mpc85xx: Remove QE firmware copy from NAND

qe_init() does not use data copied from NAND. Thise code is not tested or
complied causing compilation error during NAND boot

So, remove QE firmware copy from NAND to ddr.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 867abb6cf73038a1ef3d0bb05eadcf7c02a0ab15..a2b79cc7cc0fd153ea7c5e319b357d7d1c1721a8 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -899,19 +899,6 @@ void cpu_secondary_init_r(void)
 #endif
 
 #ifdef CONFIG_QE
-#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
-       int ret;
-       size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
-
-       /* load QE firmware from NAND flash to DDR first */
-       ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
-                       &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
-
-       if (ret && ret == -EUCLEAN) {
-               printf ("NAND read for QE firmware at offset %x failed %d\n",
-                               CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
-       }
-#endif
        qe_init(qe_base);
        qe_reset();
 #endif