phy: Fix kerneldoc alignment

Insert missing space in front of asterisk to avoid checkpatch warning.
Replace 'beeing' with 'being' as well, to fix another checkpatch warning.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

diff --git a/include/generic-phy.h b/include/generic-phy.h
index fa5f6fa36364d433a30dbf55b51376835840a213..8dca21b12838e0cc84e9359c7bf59ad15360aab9 100644 (file)
--- a/include/generic-phy.h
+++ b/include/generic-phy.h
@@ -69,72 +69,72 @@ struct phy_ops {
        int     (*init)(struct phy *phy);
 
        /**
-       * exit - de-initialize the PHY device
-       *
-       * Hardware de-intialization should be done here. Every step done in
-       * init() should be undone here.
-       * This could be used to suspend the phy to reduce power consumption or
-       * to put the phy in a known condition before booting the OS (though it
-       * is NOT called automatically before booting the OS)
-       * If power_off() is not implemented, it must power down the phy.
-       *
-       * @phy: PHY port to be de-initialized
-       * Return: 0 if OK, or a negative error code
-       */
+        * exit - de-initialize the PHY device
+        *
+        * Hardware de-intialization should be done here. Every step done in
+        * init() should be undone here.
+        * This could be used to suspend the phy to reduce power consumption or
+        * to put the phy in a known condition before booting the OS (though it
+        * is NOT called automatically before booting the OS)
+        * If power_off() is not implemented, it must power down the phy.
+        *
+        * @phy:        PHY port to be de-initialized
+        * Return: 0 if OK, or a negative error code
+        */
        int     (*exit)(struct phy *phy);
 
        /**
-       * reset - resets a PHY device without shutting down
-       *
-       * @phy: PHY port to be reset
-       *
-       * During runtime, the PHY may need to be reset in order to
-       * re-establish connection etc without being shut down or exit.
-       *
-       * Return: 0 if OK, or a negative error code
-       */
+        * reset - resets a PHY device without shutting down
+        *
+        * @phy:        PHY port to be reset
+        *
+        * During runtime, the PHY may need to be reset in order to
+        * re-establish connection etc without being shut down or exit.
+        *
+        * Return: 0 if OK, or a negative error code
+        */
        int     (*reset)(struct phy *phy);
 
        /**
-       * power_on - power on a PHY device
-       *
-       * @phy: PHY port to be powered on
-       *
-       * During runtime, the PHY may need to be powered on or off several
-       * times. This function is used to power on the PHY. It relies on the
-       * setup done in init(). If init() is not implemented, it must take care
-       * of setting up the context (PLLs, ...)
-       *
-       * Return: 0 if OK, or a negative error code
-       */
+        * power_on - power on a PHY device
+        *
+        * @phy:        PHY port to be powered on
+        *
+        * During runtime, the PHY may need to be powered on or off several
+        * times. This function is used to power on the PHY. It relies on the
+        * setup done in init(). If init() is not implemented, it must take care
+        * of setting up the context (PLLs, ...)
+        *
+        * Return: 0 if OK, or a negative error code
+        */
        int     (*power_on)(struct phy *phy);
 
        /**
-       * power_off - power off a PHY device
-       *
-       * @phy: PHY port to be powered off
-       *
-       * During runtime, the PHY may need to be powered on or off several
-       * times. This function is used to power off the PHY. Except if
-       * init()/deinit() are not implemented, it must not de-initialize
-       * everything.
-       *
-       * Return: 0 if OK, or a negative error code
-       */
+        * power_off - power off a PHY device
+        *
+        * @phy:        PHY port to be powered off
+        *
+        * During runtime, the PHY may need to be powered on or off several
+        * times. This function is used to power off the PHY. Except if
+        * init()/deinit() are not implemented, it must not de-initialize
+        * everything.
+        *
+        * Return: 0 if OK, or a negative error code
+        */
        int     (*power_off)(struct phy *phy);
 
        /**
-       * configure - configure a PHY device
-       *
-       * @phy: PHY port to be configured
-       * @params: PHY Parameters, underlying data is specific to the PHY function
-       *
-       * During runtime, the PHY may need to be configured for it's main function.
-       * This function configures the PHY for it's main function following
-       * power_on/off() after beeing initialized.
-       *
-       * Return: 0 if OK, or a negative error code
-       */
+        * configure - configure a PHY device
+        *
+        * @phy:        PHY port to be configured
+        * @params: PHY Parameters, underlying data is specific to the PHY function
+        *
+        * During runtime, the PHY may need to be configured for it's main function.
+        * This function configures the PHY for it's main function following
+        * power_on/off() after being initialized.
+        *
+        * Return: 0 if OK, or a negative error code
+        */
        int     (*configure)(struct phy *phy, void *params);
 };