configs:ls1046afrwy: Add tfa secure boot defonfig

Add TFA secure boot defconfig and Enables secure boot related
configs in it.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/board/freescale/ls1046afrwy/MAINTAINERS b/board/freescale/ls1046afrwy/MAINTAINERS
index 357d23e70d33ff3dcacb61c723e747ca2df1384b..cb8aa8c3780f41769e6d27a3660e5f1cb69b66e8 100644 (file)
--- a/board/freescale/ls1046afrwy/MAINTAINERS
+++ b/board/freescale/ls1046afrwy/MAINTAINERS
@@ -5,3 +5,8 @@ F:      board/freescale/ls1046afrwy/
 F:     board/freescale/ls1046afrwy/ls1046afrwy.c
 F:     include/configs/ls1046afrwy.h
 F:     configs/ls1046afrwy_tfa_defconfig
+
+LS1046AFRWY_SECURE_BOOT BOARD
+M:     Manish Tomar <manish.tomar@nxp.com>
+S:     Maintained
+F:     configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig

diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
new file mode 100644 (file)
index 0000000..4da4963
--- /dev/null
+++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,68 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AFRWY=y
+CONFIG_TFABOOT=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_ENV_OFFSET=0x500000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
+CONFIG_ENV_ADDR=0x40500000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+# CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_SECURE_BOOT=y
+CONFIG_RSA=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_CMD_SETEXPR=y