colibri_imx6: get rid of obsolete nospl configurations

Now with SPL long since being in place even for recovery using SDP
finally get rid of those nospl configurations.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

diff --git a/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg b/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg
deleted file mode 100644 (file)
index c940714..0000000
--- a/board/toradex/colibri_imx6/800mhz_2x64mx16.cfg
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2014-2016, Toradex AG
- */
-
-DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
-DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
-DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
-DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
-DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
-DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
-/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
-DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
-/* DDR3 DATA BUS SIZE: 64BIT */
-/* DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000 */
-/* DDR3 DATA BUS SIZE: 32BIT */
-DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000
-
-/* Write commands to DDR */
-/* Load Mode Registers */
-/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
-/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
-/* ZQ calibration */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-
-DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
-DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
-DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
-
-DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
-DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
-
-DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
-DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
-DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
-DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
-
-DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
-DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
-DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
-DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
-
-DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
-DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
-DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
-DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
-
-DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

diff --git a/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg b/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg
deleted file mode 100644 (file)
index c319d2a..0000000
--- a/board/toradex/colibri_imx6/800mhz_4x64mx16.cfg
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2014-2016, Toradex AG
- */
-
-DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
-DATA 4, MX6_MMDC_P0_MDCFG0, 0x2C305503
-DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8D63
-DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-DATA 4, MX6_MMDC_P0_MDOR, 0x00301023
-DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
-DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
-/* CS0 End: 7MSB of ((0x10000000 + 512M) -1) >> 25 */
-DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
-/* DDR3 DATA BUS SIZE: 64BIT */
-DATA 4, MX6_MMDC_P0_MDCTL, 0x821A0000
-/* DDR3 DATA BUS SIZE: 32BIT */
-/* DATA 4, MX6_MMDC_P0_MDCTL, 0x82190000 */
-
-/* Write commands to DDR */
-/* Load Mode Registers */
-/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
-/* DATA 4, MX6_MMDC_P0_MDSCR, 0x04408032 */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
-/* ZQ calibration */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-
-DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
-DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
-DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
-
-DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000
-DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000
-
-DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42360232
-DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021F022A
-DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x421E0224
-DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02110218
-
-DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x41434344
-DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4345423E
-DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x39383339
-DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3E363930
-
-DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00340039
-DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D
-DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00120019
-DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D
-
-DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006

diff --git a/board/toradex/colibri_imx6/MAINTAINERS b/board/toradex/colibri_imx6/MAINTAINERS
index 1cc7ef2e71b5b61ea10c03e6189ebd3c42bb5250..49999d8cf5797aec6c132afb92f2e4a9419c0719 100644 (file)
--- a/board/toradex/colibri_imx6/MAINTAINERS
+++ b/board/toradex/colibri_imx6/MAINTAINERS
@@ -5,4 +5,3 @@ S:      Maintained
 F:     board/toradex/colibri_imx6/
 F:     include/configs/colibri_imx6.h
 F:     configs/colibri_imx6_defconfig
-F:     configs/colibri_imx6_nospl_defconfig

diff --git a/board/toradex/colibri_imx6/clocks.cfg b/board/toradex/colibri_imx6/clocks.cfg
deleted file mode 100644 (file)
index 1bcbc4f..0000000
--- a/board/toradex/colibri_imx6/clocks.cfg
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2014-2016, Toradex AG
- *
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *      Addr-type register length (1,2 or 4 bytes)
- *      Address   absolute address of the register
- *      value     value to be stored in the register
- */
-
-/* set the default clock gate to save power */
-DATA 4, CCM_CCGR0, 0x00C03F3F
-DATA 4, CCM_CCGR1, 0x0030FC03
-DATA 4, CCM_CCGR2, 0x0FFFC000
-DATA 4, CCM_CCGR3, 0x3FF00000
-DATA 4, CCM_CCGR4, 0x00FFF300
-DATA 4, CCM_CCGR5, 0x0F0000C3
-DATA 4, CCM_CCGR6, 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
-DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
-
-/*
- * Setup CCM_CCOSR register as follows:
- *
- * cko1_en  = 1           --> CKO1 enabled
- * cko1_div = 111  --> divide by 8
- * cko1_sel = 1011 --> ahb_clk_root
- *
- * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
- */
-DATA 4, CCM_CCOSR, 0x000000fb

diff --git a/board/toradex/colibri_imx6/colibri_imx6.cfg b/board/toradex/colibri_imx6/colibri_imx6.cfg
deleted file mode 100644 (file)
index 517c5eb..0000000
--- a/board/toradex/colibri_imx6/colibri_imx6.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2014 Toradex AG
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM      sd
-
-#define __ASSEMBLY__
-#include <config.h>
-#include "asm/arch/mx6-ddr.h"
-#include "asm/arch/iomux.h"
-#include "asm/arch/crm_regs.h"
-
-#include "ddr-setup.cfg"
-
-#if CONFIG_DDR_MB == 256
-#include "800mhz_2x64mx16.cfg"
-#elif CONFIG_DDR_MB == 512
-#include "800mhz_4x64mx16.cfg"
-#else
-#error "unknown DDR size"
-#endif
-
-#include "clocks.cfg"

diff --git a/board/toradex/colibri_imx6/ddr-setup.cfg b/board/toradex/colibri_imx6/ddr-setup.cfg
deleted file mode 100644 (file)
index a943fd2..0000000
--- a/board/toradex/colibri_imx6/ddr-setup.cfg
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Boundary Devices
- * Copyright (C) 2014-2016, Toradex AG
- *
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *      Addr-type register length (1,2 or 4 bytes)
- *      Address   absolute address of the register
- *      value     value to be stored in the register
- */
-
-/*
- * DDR3 settings
- * MX6Q    ddr is limited to 1066 Mhz  currently 1056 MHz(528 MHz clock),
- *        memory bus width: 64 bits    x16/x32/x64
- * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
- *        memory bus width: 64 bits    x16/x32/x64
- * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
- *        memory bus width: 32 bits    x16/x32
- */
-DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
-
-DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
-DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
-/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
-
-DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
-
-DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
-DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
-
-DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
-DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
-
-DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
-DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
-
-/* (differential input) */
-DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-/* (differential input) */
-DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-/* disable ddr pullups */
-DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-
-/* Read data DQ Byte0-3 delay */
-DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-
-/*
- * MDMISC      mirroring       interleaved (row/bank/col)
- */
-/* TODO: check what the RALAT field does */
-DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
-
-/*
- * MDSCR       con_req
- */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000

diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig
deleted file mode 100644 (file)
index 5e9490b..0000000
--- a/configs/colibri_imx6_nospl_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_TARGET_COLIBRI_IMX6=y
-CONFIG_CMD_HDMIDETECT=y
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,MX6DL,DDR_MB=256"
-CONFIG_BOOTDELAY=1
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_MISC_INIT_R=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="Colibri iMX6 # "
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_DFU_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_MII=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Toradex"
-CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_VIDEO=y
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set