This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
config TARGET_UC100
bool "Support uc100"
-config TARGET_STXXTC
- bool "Support stxxtc"
-
config TARGET_FPS850L
bool "Support FPS850L"
source "board/r360mpi/Kconfig"
source "board/sixnet/Kconfig"
source "board/spd8xx/Kconfig"
-source "board/stx/stxxtc/Kconfig"
source "board/svm_sc8xx/Kconfig"
source "board/tqc/tqm8xx/Kconfig"
+++ /dev/null
-if TARGET_STXXTC
-
-config SYS_BOARD
- string
- default "stxxtc"
-
-config SYS_VENDOR
- string
- default "stx"
-
-config SYS_CONFIG_NAME
- string
- default "stxxtc"
-
-endif
+++ /dev/null
-STXXTC BOARD
-M: Dan Malek <dan@embeddedalley.com>
-S: Orphan (since 2014-06)
-F: board/stx/stxxtc/
-F: include/configs/stxxtc.h
-F: configs/stxxtc_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = stxxtc.o
+++ /dev/null
-
-
-First, some build notes on the Silicon Turnkey eXpress XTc.
-
-This board has both 87x/88x procesor options at various
-frequencies. The configuration file has some macros for setting
-the clock speed, not all have been tested. They all have
-a 10MHz input clock. Please do not check in a configuration
-file that selects a high speed not available on all processors.
-We chose the 66MHz core and bus speed, which should be OK on
-all boards. If you have a processor, lucky you! :-)
-Just build a new configuration with that speed, check
-the macro configuration to ensure it's correct. If the
-macro is updated, please check that in, but keep default
-processor speed.
-
-The board is likely to have more than 1Mbyte of NOR boot flash.
-It was also configured with a high boot vector (Dan's fault)
-so the standard 8xx mapping doesn't work well. We had to move
-the addresses around a little bit so one copy would work. The
-flash got fragmented, and we are working on a better solution.
-There is an "xtc.cfg" floating around for the BDI2000, use
-that for programming a new version of U-Boot. You can probably
-find it on the Silicon Turnkey eXpress (www.silicontkx.com),
-Embedded Alley Solutions (embeddedalley.com), or Denx (denx.de)
-servers.
-
-The board will also have various SDRAM sizes, but the code
-should automatically determine the amount of memory.
-
-There are a couple of different board versions, visually
-they use different BGA or surface mount memory parts. However,
-they are logically the same board.
-
-Now, some operational notes.
-
-The board has the option of sporting two FEC Ethernet ports.
-The second port isn't configured to be automatically available
-because it would cause U-Boot to generate a board data structure
-(the bd_t) with multiple MAC addresses and be incompatible with
-standard 8xx kernel builds. You can use/test the second FEC
-in U-Boot by assigning an 'eth1addr' and selecting the second
-FEC as the port to use.
-
-Since this is just a development board and not a product, STx
-does not assign unique MAC addresses. We just pilfer the
-"default" ones used by Wolfgang on some other boards. Please
-ensure you assign unique MAC addresses when using these boards.
-
-The serial port baud rate is 38400, because that's the way
-I like it :-)
-
-Thanks to Pantelis for lots of the work on this board port.
-
-Have Fun!
-
- -- Dan
-
-15 August 2005
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2005
- * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * U-Boot port on STx XTc board
- * Mostly copied from Netta
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b) (1U << (31-(_b)))
-#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b) (1U << (15-(_b)))
-#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b) (1U << (7-(_b)))
-#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b) _BD(_b)
-#define _BR(_l, _h) _BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
- printf ("Silicon Turnkey eXpress XTc\n");
- return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000 0x00000000
-#define CS_0001 0x10000000
-#define CS_0010 0x20000000
-#define CS_0011 0x30000000
-#define CS_0100 0x40000000
-#define CS_0101 0x50000000
-#define CS_0110 0x60000000
-#define CS_0111 0x70000000
-#define CS_1000 0x80000000
-#define CS_1001 0x90000000
-#define CS_1010 0xA0000000
-#define CS_1011 0xB0000000
-#define CS_1100 0xC0000000
-#define CS_1101 0xD0000000
-#define CS_1110 0xE0000000
-#define CS_1111 0xF0000000
-
-#define BS_0000 0x00000000
-#define BS_0001 0x01000000
-#define BS_0010 0x02000000
-#define BS_0011 0x03000000
-#define BS_0100 0x04000000
-#define BS_0101 0x05000000
-#define BS_0110 0x06000000
-#define BS_0111 0x07000000
-#define BS_1000 0x08000000
-#define BS_1001 0x09000000
-#define BS_1010 0x0A000000
-#define BS_1011 0x0B000000
-#define BS_1100 0x0C000000
-#define BS_1101 0x0D000000
-#define BS_1110 0x0E000000
-#define BS_1111 0x0F000000
-
-#define GPL0_AAAA 0x00000000
-#define GPL0_AAA0 0x00200000
-#define GPL0_AAA1 0x00300000
-#define GPL0_000A 0x00800000
-#define GPL0_0000 0x00A00000
-#define GPL0_0001 0x00B00000
-#define GPL0_111A 0x00C00000
-#define GPL0_1110 0x00E00000
-#define GPL0_1111 0x00F00000
-
-#define GPL1_0000 0x00000000
-#define GPL1_0001 0x00040000
-#define GPL1_1110 0x00080000
-#define GPL1_1111 0x000C0000
-
-#define GPL2_0000 0x00000000
-#define GPL2_0001 0x00010000
-#define GPL2_1110 0x00020000
-#define GPL2_1111 0x00030000
-
-#define GPL3_0000 0x00000000
-#define GPL3_0001 0x00004000
-#define GPL3_1110 0x00008000
-#define GPL3_1111 0x0000C000
-
-#define GPL4_0000 0x00000000
-#define GPL4_0001 0x00001000
-#define GPL4_1110 0x00002000
-#define GPL4_1111 0x00003000
-
-#define GPL5_0000 0x00000000
-#define GPL5_0001 0x00000400
-#define GPL5_1110 0x00000800
-#define GPL5_1111 0x00000C00
-#define LOOP 0x00000080
-
-#define EXEN 0x00000040
-
-#define AMX_COL 0x00000000
-#define AMX_ROW 0x00000020
-#define AMX_MAR 0x00000030
-
-#define NA 0x00000008
-
-#define UTA 0x00000004
-
-#define TODT 0x00000002
-
-#define LAST 0x00000001
-
-#define A10_AAAA GPL0_AAAA
-#define A10_AAA0 GPL0_AAA0
-#define A10_AAA1 GPL0_AAA1
-#define A10_000A GPL0_000A
-#define A10_0000 GPL0_0000
-#define A10_0001 GPL0_0001
-#define A10_111A GPL0_111A
-#define A10_1110 GPL0_1110
-#define A10_1111 GPL0_1111
-
-#define RAS_0000 GPL1_0000
-#define RAS_0001 GPL1_0001
-#define RAS_1110 GPL1_1110
-#define RAS_1111 GPL1_1111
-
-#define CAS_0000 GPL2_0000
-#define CAS_0001 GPL2_0001
-#define CAS_1110 GPL2_1110
-#define CAS_1111 GPL2_1111
-
-#define WE_0000 GPL3_0000
-#define WE_0001 GPL3_0001
-#define WE_1110 GPL3_1110
-#define WE_1111 GPL3_1111
-
-/* #define CAS_LATENCY 3 */
-#define CAS_LATENCY 2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
-#endif
-
- /* UPT */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
- CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-static const uint nandcs_table[0x40] = {
- /* RSS */
- CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111,
- CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */
-
- /* RBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
- /* WBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* UPT */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 ,
- CS_0001 | LAST,
-};
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 9 */
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
- unsigned int i, j, v, vv;
- volatile unsigned int *p;
- unsigned int pv;
-
- p = (unsigned int *)addr;
- pv = (unsigned int)p;
- for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
- *p++ = pv;
-
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- v = (unsigned int)p;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- p++;
- }
-
- for (j = 0; j < 5; j++) {
- switch (j) {
- case 0: v = 0x00000000; break;
- case 1: v = 0xffffffff; break;
- case 2: v = 0x55555555; break;
- case 3: v = 0xaaaaaaaa; break;
- default:v = 0xdeadbeef; break;
- }
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- *p = v;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- *p = ~v;
- p++;
- }
- }
-}
-
-#define DO_LOOP do { for (;;) asm volatile ("nop" : : : "memory"); } while(0)
-
-phys_size_t initdram(int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size;
- u32 d1, d2;
-
- upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
- memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */
-
- udelay(200);
-
- /* perform SDRAM initialisation sequence */
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/
- udelay(1);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay(10000);
-
-
- d1 = 0xAA55AA55;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- DO_LOOP;
- }
-
- d1 = 0x55AA55AA;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- DO_LOOP;
- }
-
- d1 = 0x12345678;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- DO_LOOP;
- }
-
- size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
- return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
- int phyno;
- unsigned short v;
-
- udelay(10000);
- /* reset the damn phys */
- mii_init();
-
- for (phyno = 0; phyno < 32; ++phyno) {
- miiphy_read("FEC", phyno, MII_PHYSID1, &v);
- if (v == 0xFFFF)
- continue;
- miiphy_write("FEC", phyno, MII_BMCR, BMCR_PDOWN);
- udelay(10000);
- miiphy_write("FEC", phyno, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
- udelay(10000);
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK _BW(6)
-#define PA_GP_OUTMASK (_BW(7))
-#define PA_SP_MASK 0
-#define PA_ODR_VAL 0
-#define PA_GP_OUTVAL (_BW(7))
-#define PA_SP_DIRVAL 0
-
-#define PB_GP_INMASK 0
-#define PB_GP_OUTMASK (_B(23))
-#define PB_SP_MASK 0
-#define PB_ODR_VAL 0
-#define PB_GP_OUTVAL (_B(23))
-#define PB_SP_DIRVAL 0
-
-#define PC_GP_INMASK 0
-#define PC_GP_OUTMASK (_BW(15))
-
-#define PC_SP_MASK 0
-#define PC_SOVAL 0
-#define PC_INTVAL 0
-#define PC_GP_OUTVAL 0
-#define PC_SP_DIRVAL 0
-
-#define PE_GP_INMASK 0
-#define PE_GP_OUTMASK 0
-#define PE_GP_OUTVAL 0
-
-#define PE_SP_MASK 0
-#define PE_ODR_VAL 0
-#define PE_SP_DIRVAL 0
-
-int board_early_init_f(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *ioport = &immap->im_ioport;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- (void)ioport;
- (void)cpm;
-#if 1
- /* NAND chip select */
- upmconfig(UPMB, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
- memctl->memc_or2 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
- memctl->memc_br2 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMB);
- memctl->memc_mbmr = 0; /* all clear */
-#endif
-
- memctl->memc_br5 &= ~BR_V;
- memctl->memc_br6 &= ~BR_V;
- memctl->memc_br7 &= ~BR_V;
-
-#if 1
- ioport->iop_padat = PA_GP_OUTVAL;
- ioport->iop_paodr = PA_ODR_VAL;
- ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL;
- ioport->iop_papar = PA_SP_MASK;
-
- cpm->cp_pbdat = PB_GP_OUTVAL;
- cpm->cp_pbodr = PB_ODR_VAL;
- cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL;
- cpm->cp_pbpar = PB_SP_MASK;
-
- ioport->iop_pcdat = PC_GP_OUTVAL;
- ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL;
- ioport->iop_pcso = PC_SOVAL;
- ioport->iop_pcint = PC_INTVAL;
- ioport->iop_pcpar = PC_SP_MASK;
-
- cpm->cp_pedat = PE_GP_OUTVAL;
- cpm->cp_peodr = PE_ODR_VAL;
- cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL;
- cpm->cp_pepar = PE_SP_MASK;
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
- /* XXX add here the really funky stuff */
-}
-
-#endif
-
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
- /* printf("overwrite_console called\n"); */
- return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
- return 0;
-}
-
-int last_stage_init(void)
-{
- reset_phys();
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_STXXTC=y
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+stxxtc powerpc mpc8xx - - Dan Malek <dan@embeddedalley.com>
omap5912osk arm arm926ejs - - Rishi Bhattacharya <rishi@ti.com>
p1023rds powerpc mpc85xx d0bc5140 2014-07-22 Roy Zang <tie-fei.zang@freescale.com>
spc1920 powerpc mpc8xx 98ad54be 2014-07-07
defined(CONFIG_MPC866) || \
defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
-#elif defined(CONFIG_MPC870) \
- || defined(CONFIG_MPC875) \
- || defined(CONFIG_MPC880) \
- || defined(CONFIG_MPC885)
+#elif defined(CONFIG_MPC885)
# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) \
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
- * U-Boot port on STx XTc 8xx board
- * Mostly copied from Panto's NETTA2 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC875 1 /* This is a MPC875 CPU */
-#define CONFIG_STXXTC 1 /* ...on a STx XTc board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40F00000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115.2kbps */
-
-#define CONFIG_XIN 10000000 /* 10 MHz input xtal */
-
-/* Select one of few clock rates defined later in this file.
-*/
-/* #define MPC8XX_HZ 50000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#undef CONFIG_RMII
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 1 /* phy address of FEC */
-#undef CONFIG_FEC1_PHY_NORXERR
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 3
-#undef CONFIG_FEC2_PHY_NORXERR
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "xtc> " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-
-/* yes this is weird, I know :) */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE | 0x00F00000)
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00000000)
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x00010000)
-#define CONFIG_ENV_OFFSET_REDUND 0
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x2000000 }
-
-#define CONFIG_SYS_FLASH_PROTECTION
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-#else
-#error unsupported freq for XIN (must be 10MHz)
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x42000000 /* FLASH bank #1 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-
-#define FLASH_BANK_MAX_SIZE 0x01000000 /* max size per chip */
-
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000
-#define CONFIG_SYS_PRELIM_OR_AM (0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-
-#define CONFIG_SYS_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-
-/*
- * BR4 and OR4 (SDRAM)
- *
- */
-#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR4_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define NAND_SIZE 0x00010000 /* 64K */
-#define NAND_BASE 0xF1000000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
- * CxOE and CxRESET. We use the CxOE.
- */
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/******************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/******************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-
-/*****************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_CRC32_VERIFY 1
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*****************************************************************************/
-
-/* pass open firmware flattened device tree */
-#define CONFIG_OF_LIBFDT 1
-
-#define OF_TBCLK (MPC8XX_HZ / 16)
-
-#endif /* __CONFIG_H */
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-/***** STx XTc ********************************************************/
-#elif defined(CONFIG_STXXTC)
-/* XXX empty just to avoid the error */
-/************************************************************************/
#elif defined(CONFIG_V38B)
# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
projects / u-boot.git / commitdiff
