board: ti: am43xx: remove net platform code

The TI AM43xx platform has DM_ETH and OF_CONTROL enabled,
so remove networking platform code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index d12f1ebfdf9534e1852fe4ed9cabfa8d848b7289..99b83d7ed19bfc98e927bcfa76243388b6beedfc 100644 (file)
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -9,6 +9,7 @@
 
 #include <common.h>
 #include <eeprom.h>
+#include <dm/uclass.h>
 #include <env.h>
 #include <i2c.h>
 #include <init.h>
@@ -28,8 +29,6 @@
 #include <power/pmic.h>
 #include <power/tps65218.h>
 #include <power/tps62362.h>
-#include <miiphy.h>
-#include <cpsw.h>
 #include <linux/usb/gadget.h>
 #include <dwc3-uboot.h>
 #include <dwc3-omap-uboot.h>
@@ -853,109 +852,6 @@ int board_usb_cleanup(int index, enum usb_init_type init)
 #endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
 #endif /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
 
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-static void cpsw_control(int enabled)
-{
-       /* Additional controls can be added here */
-       return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-       {
-               .slave_reg_ofs  = 0x208,
-               .sliver_reg_ofs = 0xd80,
-               .phy_addr       = 16,
-       },
-       {
-               .slave_reg_ofs  = 0x308,
-               .sliver_reg_ofs = 0xdc0,
-               .phy_addr       = 1,
-       },
-};
-
-static struct cpsw_platform_data cpsw_data = {
-       .mdio_base              = CPSW_MDIO_BASE,
-       .cpsw_base              = CPSW_BASE,
-       .mdio_div               = 0xff,
-       .channels               = 8,
-       .cpdma_reg_ofs          = 0x800,
-       .slaves                 = 1,
-       .slave_data             = cpsw_slaves,
-       .ale_reg_ofs            = 0xd00,
-       .ale_entries            = 1024,
-       .host_port_reg_ofs      = 0x108,
-       .hw_stats_reg_ofs       = 0x900,
-       .bd_ram_ofs             = 0x2000,
-       .mac_control            = (1 << 5),
-       .control                = cpsw_control,
-       .host_port_num          = 0,
-       .version                = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-       int rv;
-       uint8_t mac_addr[6];
-       uint32_t mac_hi, mac_lo;
-
-       /* try reading mac address from efuse */
-       mac_lo = readl(&cdev->macid0l);
-       mac_hi = readl(&cdev->macid0h);
-       mac_addr[0] = mac_hi & 0xFF;
-       mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-       mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-       mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-       mac_addr[4] = mac_lo & 0xFF;
-       mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-       if (!env_get("ethaddr")) {
-               puts("<ethaddr> not set. Validating first E-fuse MAC\n");
-               if (is_valid_ethaddr(mac_addr))
-                       eth_env_set_enetaddr("ethaddr", mac_addr);
-       }
-
-       mac_lo = readl(&cdev->macid1l);
-       mac_hi = readl(&cdev->macid1h);
-       mac_addr[0] = mac_hi & 0xFF;
-       mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-       mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-       mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-       mac_addr[4] = mac_lo & 0xFF;
-       mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-       if (!env_get("eth1addr")) {
-               if (is_valid_ethaddr(mac_addr))
-                       eth_env_set_enetaddr("eth1addr", mac_addr);
-       }
-
-       if (board_is_eposevm()) {
-               writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-               cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
-               cpsw_slaves[0].phy_addr = 16;
-       } else if (board_is_sk()) {
-               writel(RGMII_MODE_ENABLE, &cdev->miisel);
-               cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-               cpsw_slaves[0].phy_addr = 4;
-               cpsw_slaves[1].phy_addr = 5;
-       } else if (board_is_idk()) {
-               writel(RGMII_MODE_ENABLE, &cdev->miisel);
-               cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-               cpsw_slaves[0].phy_addr = 0;
-       } else {
-               writel(RGMII_MODE_ENABLE, &cdev->miisel);
-               cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-               cpsw_slaves[0].phy_addr = 0;
-       }
-
-       rv = cpsw_register(&cpsw_data);
-       if (rv < 0)
-               printf("Error %d registering CPSW switch\n", rv);
-
-       return rv;
-}
-#endif
-
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, bd_t *bd)
 {