board: ten64: add a bootmenu entries for NAND-based entries

The recovery-firmware and OpenWrt-NAND do not yet have bootflow
/bootstd entrypoints, so add bootmenu entries to make them
accessible.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/include/configs/ten64.h b/include/configs/ten64.h
index f9e800d4b6cb49dc1d1ec667ba95a7214aa53d9e..d2bef9b6e528d8b8bd8b9eb2dc3221924cef8b57 100644 (file)
--- a/include/configs/ten64.h
+++ b/include/configs/ten64.h
@@ -46,6 +46,15 @@
        "bootm $load_addr#ten64\0"
 #undef CFG_EXTRA_ENV_SETTINGS
 
+#if CONFIG_IS_ENABLED(CMD_BOOTMENU)
+#define DEFAULT_MENU_ENTRIES \
+       "bootmenu_0=Continue standard boot=run bootcmd\0" \
+       "bootmenu_1=Boot into recovery=run bootcmd_recovery\0" \
+       "bootmenu_2=Boot OpenWrt from NAND=run bootcmd_openwrt_nand\0"
+#else
+#define DEFAULT_MENU_ENTRIES ""
+#endif /* CONFIG_IS_ENABLED(CMD_BOOTMENU) */
+
 #define CFG_EXTRA_ENV_SETTINGS \
        "BOARD=ten64\0"                                 \
        "fdt_addr_r=0x90000000\0"               \
@@ -57,7 +66,8 @@
        "openwrt_active_sys=a\0" \
        "load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \
        "fdt resize && fdt boardsetup\0" \
-       "bootcmd_recovery=mtd read recovery 0xa0000000 && " \
-       "setenv bootargs \"earlycon root=/dev/ram0 ramdisk_size=0x3000000\" && bootm 0xa0000000#ten64\0"
+       "bootcmd_recovery=mtd read recovery 0xa0000000;  " \
+       "setenv bootargs \"earlycon root=/dev/ram0 ramdisk_size=0x3000000\" && bootm 0xa0000000#ten64\0" \
+       DEFAULT_MENU_ENTRIES
 
 #endif /* __TEN64_H */