+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada 371x family of SoCs
* (also named 88F3710)
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-37xx.dtsi"
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Marvell Armada 3720 development board
* (DB-88F3720-DDR3)
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
stdout-path = "serial0:115200n8";
};
- aliases {
- ethernet0 = ð0;
- i2c0 = &i2c0;
- spi0 = &spi0;
- };
-
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
-};
-&comphy {
- phy0 {
- phy-type = <COMPHY_TYPE_USB3_HOST0>;
- phy-speed = <COMPHY_SPEED_5G>;
+ exp_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&exp_usb3_vbus>;
};
- phy1 {
- phy-type = <COMPHY_TYPE_PEX0>;
- phy-speed = <COMPHY_SPEED_2_5G>;
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ vcc_sd_reg2: regulator-vmcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sd2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
};
};
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
ð0 {
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+ð1 {
+ phy-mode = "sgmii";
+ phy = <&phy1>;
status = "okay";
- phy-mode = "rgmii";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
+
+ gpio_exp: pca9555@22 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0x22>;
+ /*
+ * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT
+ * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE
+ * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN
+ * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN
+ * IO0_4: PWR_EN_SD
+ * IO0_5: PWR_EN_EMMC
+ * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL
+ * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS
+ */
+ };
+
+ rtc@68 {
+ /* PT7C4337A from pericom fully compatible with the ds1337 */
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
};
-/* CON3 */
-&sata {
+&mdio {
status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
-&sdhci1 {
- bus-width = <4>;
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
pinctrl-names = "default";
- pinctrl-0 = <&sdio_pins>;
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* CON3 */
+&sata {
status = "okay";
};
mmc-ddr-1_8v;
mmc-hs400-1_8v;
marvell,pad-type = "fixed-1-8v";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc_pins>;
status = "okay";
+};
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard@0 {
- compatible = "mmc-card";
- reg = <0>;
- };
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+ wp-inverted;
+ cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vcc_sd_reg1>;
+ vmmc-supply = <&vcc_sd_reg2>;
+ status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <50000000>;
- m25p,fast-read;
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x200000>;
+ };
+ partition@200000 {
+ label = "U-boot Env";
+ reg = <0x200000 0x10000>;
+ };
+ partition@210000 {
+ label = "Linux";
+ reg = <0x210000 0xDF0000>;
+ };
+ };
};
};
-/* Exported on the micro USB connector CON32 through an FTDI */
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
+ */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
-/* CON29 */
-&usb2 {
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
status = "okay";
};
-/* CON31 */
-&usb3 {
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
status = "okay";
};
-/* CON17 */
-&pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
status = "okay";
+ usb-phy = <&usb3_phy>;
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Device Tree file for Marvell Armada 3720 community board
- * (ESPRESSOBin)
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
* Copyright (C) 2016 Marvell
*
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
+ * Romain Perier <romain.perier@free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
*/
/dts-v1/;
-#include "armada-372x.dtsi"
+#include "armada-3720-espressobin.dtsi"
/ {
model = "Globalscale Marvell ESPRESSOBin Board";
compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- ethernet0 = ð0;
- i2c0 = &i2c0;
- spi0 = &spi0;
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- vcc_sd_reg0: regulator@0 {
- compatible = "regulator-gpio";
- regulator-name = "vcc_sd0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-type = "voltage";
- states = <1800000 0x1
- 3300000 0x0>;
- gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
- };
-};
-
-ð0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
- phy-mode = "rgmii";
- phy_addr = <0x1>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-/* CON3 */
-&sata {
- status = "okay";
- phys = <&comphy2 0>;
-};
-
-&sdhci1 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdio_pins>;
- bus-width = <4>;
- cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vcc_sd_reg0>;
- status = "okay";
-};
-
-/* U11 */
-&sdhci0 {
- non-removable;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,xenon-emmc;
- marvell,xenon-tun-count = <9>;
- marvell,pad-type = "fixed-1-8v";
-
- pinctrl-names = "default";
- pinctrl-0 = <&mmc_pins>;
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard@0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <50000000>;
- m25p,fast-read;
- };
-};
-
-/* Exported on the micro USB connector CON32 through an FTDI */
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
- status = "okay";
-};
-
-/* CON29 */
-&usb2 {
- status = "okay";
-};
-
-/* CON31 */
-&usb3 {
- status = "okay";
- phys = <&comphy0 0>;
-};
-
-&pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- status = "okay";
- phys = <&comphy1 0>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = ð0;
+ /* for dsa slave device */
+ ethernet1 = &switch0port1;
+ ethernet2 = &switch0port2;
+ ethernet3 = &switch0port3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ led2: gpio-led2 {
+ /* led2 is working only on v7 board */
+ status = "disabled";
+
+ compatible = "gpio-leds";
+
+ led2 {
+ label = "led2";
+ gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+/* J9 */
+&pcie0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+};
+
+/* J6 */
+&sata {
+ status = "okay";
+};
+
+/* U11 */
+&sdhci0 {
+ /* Main DTS file for Espressobin is without eMMC */
+ status = "disabled";
+
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
+/* J1 */
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vcc_sd_reg1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ };
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+/*
+ * Connector J17 and J18 expose a number of different features. Some pins are
+ * multiplexed. This is the case for instance for the following features:
+ * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
+ * how to enable it. Beware that the signals are 1.8V TTL.
+ * - I2C
+ * - SPI
+ * - MMC
+ */
+
+/* J7 */
+&usb3 {
+ status = "okay";
+};
+
+/* J8 */
+&usb2 {
+ status = "okay";
+};
+
+&mdio {
+ switch0: switch0@1 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0port0: port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <ð0>;
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch0port1: port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ switch0port2: port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ switch0port3: port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
-// SPDX-License-Identifier: GPL-2.0+ or X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CZ.NIC Turris Mox Board
- * 2018 by Marek Behun <marek.behun@nic.cz>
- *
- * Based on armada-3720-espressobin.dts by:
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
+ * 2019 by Marek Behún <kabel@kernel.org>
*/
/dts-v1/;
+#include <dt-bindings/bus/moxtet.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
#include "armada-372x.dtsi"
/ {
compatible = "cznic,turris-mox", "marvell,armada3720",
"marvell,armada3710";
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
aliases {
+ spi0 = &spi0;
ethernet0 = ð0;
ethernet1 = ð1;
- i2c0 = &i2c0;
- spi0 = &spi0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
-
- led {
+ red {
+ label = "mox:red:activity";
gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_ACTIVITY;
+ linux,default-trigger = "default-on";
};
};
compatible = "gpio-keys";
reset {
- compatible = "gpio-keys";
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
};
};
- reg_usb3_vbus: usb3_vbus@0 {
+ exp_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- startup-delay-us = <2000000>;
- shutdown-delay-us = <1000000>;
- gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
};
vsdc_reg: vsdc-reg {
enable-active-high;
};
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
+ vsdio_reg: vsdio-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vsdio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
- eth_phy1: ethernet-phy@1 {
- reg = <1>;
- };
+ gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
};
-};
-ð0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
- phy-mode = "rgmii";
- phy = <ð_phy1>;
-};
+ sdhci1_pwrseq: sdhci1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
-ð1 {
- phy-mode = "2500base-x";
- phys = <&comphy0 1>;
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
+
+ /* enabled by U-Boot if SFP module is present */
+ status = "disabled";
+ };
+
+ firmware {
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+ };
+ };
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ /delete-property/ mrvl,i2c-fast-mode;
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
rtc@6f {
- compatible = "microchip,mcp7941x";
+ compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
};
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ status = "okay";
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ /*
+ * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+ * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+ * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+ * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+ * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+ * for IO and the rest 112 MB (64+32+16) for MEM. Controller supports 32-bit IO mapping.
+ * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+ * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+ * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+ * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+ * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+ */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */
+ 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */
+
+ /* enabled by U-Boot if PCIe module is present */
+ status = "disabled";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
+ status = "okay";
+};
+
+ð1 {
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ phys = <&comphy0 1>;
+};
+
&sdhci0 {
wp-inverted;
bus-width = <4>;
status = "okay";
};
-&pinctrl_nb {
- spi_cs1_pins: spi-cs1-pins {
- groups = "spi_cs1";
- function = "spi";
- };
+&sdhci1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
+ non-removable;
+ bus-width = <4>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vsdio_reg>;
+ mmc-pwrseq = <&sdhci1_pwrseq>;
+ /* forbid SDR104 for FCC purposes */
+ sdhci-caps-mask = <0x2 0x0>;
+ status = "okay";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&spi_cs1_pins>;
+ pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
assigned-clocks = <&nb_periph_clk 7>;
assigned-clock-parents = <&tbg 1>;
assigned-clock-rates = <20000000>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,s25fl064l", "jedec,spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- m25p,fast-read;
partitions {
compatible = "fixed-partitions";
};
};
- moxtet@1 {
+ moxtet: moxtet@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "cznic,moxtet";
reg = <1>;
reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
spi-cpol;
spi-cpha;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gpiosb>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+
+ moxtet_sfp: gpio@0 {
+ compatible = "cznic,moxtet-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ status = "disabled";
+ };
};
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+&usb2 {
status = "okay";
};
-&usb2 {
- status = "okay";
+&comphy2 {
+ connector {
+ compatible = "usb-a-connector";
+ phy-supply = <&exp_usb3_vbus>;
+ };
};
&usb3 {
- vbus-supply = <®_usb3_vbus>;
status = "okay";
phys = <&comphy2 0>;
};
-&pcie0 {
+&mdio {
pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- status = "disabled";
- phys = <&comphy1 0>;
+ pinctrl-0 = <&smi_pins>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ /* switch nodes are enabled by U-Boot if modules are present */
+ switch0@10 {
+ compatible = "marvell,mv88e6190";
+ reg = <0x10 0>;
+ dsa,member = <0 0>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_PERIDOT(0)>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: switch0phy1@1 {
+ reg = <0x1>;
+ };
+
+ switch0phy2: switch0phy2@2 {
+ reg = <0x2>;
+ };
+
+ switch0phy3: switch0phy3@3 {
+ reg = <0x3>;
+ };
+
+ switch0phy4: switch0phy4@4 {
+ reg = <0x4>;
+ };
+
+ switch0phy5: switch0phy5@5 {
+ reg = <0x5>;
+ };
+
+ switch0phy6: switch0phy6@6 {
+ reg = <0x6>;
+ };
+
+ switch0phy7: switch0phy7@7 {
+ reg = <0x7>;
+ };
+
+ switch0phy8: switch0phy8@8 {
+ reg = <0x8>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "lan5";
+ phy-handle = <&switch0phy5>;
+ };
+
+ port@6 {
+ reg = <0x6>;
+ label = "lan6";
+ phy-handle = <&switch0phy6>;
+ };
+
+ port@7 {
+ reg = <0x7>;
+ label = "lan7";
+ phy-handle = <&switch0phy7>;
+ };
+
+ port@8 {
+ reg = <0x8>;
+ label = "lan8";
+ phy-handle = <&switch0phy8>;
+ };
+
+ port@9 {
+ reg = <0x9>;
+ label = "cpu";
+ ethernet = <ð1>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ };
+
+ switch0port10: port@a {
+ reg = <0xa>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch1port9 &switch2port9>;
+ status = "disabled";
+ };
+
+ port-sfp@a {
+ reg = <0xa>;
+ label = "sfp";
+ sfp = <&sfp>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "disabled";
+ };
+ };
+ };
+
+ switch0@2 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x2 0>;
+ dsa,member = <0 0>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_TOPAZ>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1_topaz: switch0phy1@11 {
+ reg = <0x11>;
+ };
+
+ switch0phy2_topaz: switch0phy2@12 {
+ reg = <0x12>;
+ };
+
+ switch0phy3_topaz: switch0phy3@13 {
+ reg = <0x13>;
+ };
+
+ switch0phy4_topaz: switch0phy4@14 {
+ reg = <0x14>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1_topaz>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan2";
+ phy-handle = <&switch0phy2_topaz>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan3";
+ phy-handle = <&switch0phy3_topaz>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan4";
+ phy-handle = <&switch0phy4_topaz>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "cpu";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ ethernet = <ð1>;
+ };
+ };
+ };
+
+ switch1@11 {
+ compatible = "marvell,mv88e6190";
+ reg = <0x11 0>;
+ dsa,member = <0 1>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_PERIDOT(1)>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1phy1: switch1phy1@1 {
+ reg = <0x1>;
+ };
+
+ switch1phy2: switch1phy2@2 {
+ reg = <0x2>;
+ };
+
+ switch1phy3: switch1phy3@3 {
+ reg = <0x3>;
+ };
+
+ switch1phy4: switch1phy4@4 {
+ reg = <0x4>;
+ };
+
+ switch1phy5: switch1phy5@5 {
+ reg = <0x5>;
+ };
+
+ switch1phy6: switch1phy6@6 {
+ reg = <0x6>;
+ };
+
+ switch1phy7: switch1phy7@7 {
+ reg = <0x7>;
+ };
+
+ switch1phy8: switch1phy8@8 {
+ reg = <0x8>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan9";
+ phy-handle = <&switch1phy1>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan10";
+ phy-handle = <&switch1phy2>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan11";
+ phy-handle = <&switch1phy3>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan12";
+ phy-handle = <&switch1phy4>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "lan13";
+ phy-handle = <&switch1phy5>;
+ };
+
+ port@6 {
+ reg = <0x6>;
+ label = "lan14";
+ phy-handle = <&switch1phy6>;
+ };
+
+ port@7 {
+ reg = <0x7>;
+ label = "lan15";
+ phy-handle = <&switch1phy7>;
+ };
+
+ port@8 {
+ reg = <0x8>;
+ label = "lan16";
+ phy-handle = <&switch1phy8>;
+ };
+
+ switch1port9: port@9 {
+ reg = <0x9>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch0port10>;
+ };
+
+ switch1port10: port@a {
+ reg = <0xa>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch2port9>;
+ status = "disabled";
+ };
+
+ port-sfp@a {
+ reg = <0xa>;
+ label = "sfp";
+ sfp = <&sfp>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "disabled";
+ };
+ };
+ };
+
+ switch1@2 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x2 0>;
+ dsa,member = <0 1>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_TOPAZ>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1phy1_topaz: switch1phy1@11 {
+ reg = <0x11>;
+ };
+
+ switch1phy2_topaz: switch1phy2@12 {
+ reg = <0x12>;
+ };
+
+ switch1phy3_topaz: switch1phy3@13 {
+ reg = <0x13>;
+ };
+
+ switch1phy4_topaz: switch1phy4@14 {
+ reg = <0x14>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan9";
+ phy-handle = <&switch1phy1_topaz>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan10";
+ phy-handle = <&switch1phy2_topaz>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan11";
+ phy-handle = <&switch1phy3_topaz>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan12";
+ phy-handle = <&switch1phy4_topaz>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch0port10>;
+ };
+ };
+ };
+
+ switch2@12 {
+ compatible = "marvell,mv88e6190";
+ reg = <0x12 0>;
+ dsa,member = <0 2>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_PERIDOT(2)>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch2phy1: switch2phy1@1 {
+ reg = <0x1>;
+ };
+
+ switch2phy2: switch2phy2@2 {
+ reg = <0x2>;
+ };
+
+ switch2phy3: switch2phy3@3 {
+ reg = <0x3>;
+ };
+
+ switch2phy4: switch2phy4@4 {
+ reg = <0x4>;
+ };
+
+ switch2phy5: switch2phy5@5 {
+ reg = <0x5>;
+ };
+
+ switch2phy6: switch2phy6@6 {
+ reg = <0x6>;
+ };
+
+ switch2phy7: switch2phy7@7 {
+ reg = <0x7>;
+ };
+
+ switch2phy8: switch2phy8@8 {
+ reg = <0x8>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan17";
+ phy-handle = <&switch2phy1>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan18";
+ phy-handle = <&switch2phy2>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan19";
+ phy-handle = <&switch2phy3>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan20";
+ phy-handle = <&switch2phy4>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "lan21";
+ phy-handle = <&switch2phy5>;
+ };
+
+ port@6 {
+ reg = <0x6>;
+ label = "lan22";
+ phy-handle = <&switch2phy6>;
+ };
+
+ port@7 {
+ reg = <0x7>;
+ label = "lan23";
+ phy-handle = <&switch2phy7>;
+ };
+
+ port@8 {
+ reg = <0x8>;
+ label = "lan24";
+ phy-handle = <&switch2phy8>;
+ };
+
+ switch2port9: port@9 {
+ reg = <0x9>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch1port10 &switch0port10>;
+ };
+
+ port-sfp@a {
+ reg = <0xa>;
+ label = "sfp";
+ sfp = <&sfp>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "disabled";
+ };
+ };
+ };
+
+ switch2@2 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x2 0>;
+ dsa,member = <0 2>;
+ interrupt-parent = <&moxtet>;
+ interrupts = <MOXTET_IRQ_TOPAZ>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch2phy1_topaz: switch2phy1@11 {
+ reg = <0x11>;
+ };
+
+ switch2phy2_topaz: switch2phy2@12 {
+ reg = <0x12>;
+ };
+
+ switch2phy3_topaz: switch2phy3@13 {
+ reg = <0x13>;
+ };
+
+ switch2phy4_topaz: switch2phy4@14 {
+ reg = <0x14>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <0x1>;
+ label = "lan17";
+ phy-handle = <&switch2phy1_topaz>;
+ };
+
+ port@2 {
+ reg = <0x2>;
+ label = "lan18";
+ phy-handle = <&switch2phy2_topaz>;
+ };
+
+ port@3 {
+ reg = <0x3>;
+ label = "lan19";
+ phy-handle = <&switch2phy3_topaz>;
+ };
+
+ port@4 {
+ reg = <0x4>;
+ label = "lan20";
+ phy-handle = <&switch2phy4_topaz>;
+ };
+
+ port@5 {
+ reg = <0x5>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ link = <&switch1port10 &switch0port10>;
+ };
+ };
+ };
};
* Device tree for the uDPU board.
* Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
* Copyright (C) 2016 Marvell
- * Copyright (C) 2018 Methode
- * Copyright (C) 2018 Telus
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
*
* Vladimir Vid <vladimir.vid@sartura.hr>
*/
/dts-v1/;
-#include "armada-37xx.dtsi"
-#include "armada-3720-uDPU-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
/ {
model = "Methode uDPU Board";
- compatible = "methode,udpu";
+ compatible = "methode,udpu", "marvell,armada3720";
chosen {
stdout-path = "serial0:115200n8";
- bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000";
- };
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- spi0 = &spi0;
};
memory@0 {
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
- mdio: mdio@32004 {
- #address-cells = <1>;
- #size-cells = <0>;
- ethphy0: ethernet-phy@0 {
- reg = <0>;
+ leds {
+ pinctrl-names = "default";
+ compatible = "gpio-leds";
+
+ power1 {
+ label = "udpu:green:power";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
};
- ethphy1: ethernet-phy@1 {
- reg = <1>;
+
+ power2 {
+ label = "udpu:red:power";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
};
- };
- scsi: scsi {
- compatible = "marvell,mvebu-scsi";
- #address-cells = <1>;
- #size-cells = <1>;
- max-id = <1>;
- max-lun = <1>;
- status = "okay";
- };
+ network1 {
+ label = "udpu:green:network";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ };
- i2c1: i2c@11080 {
- compatible = "marvell,armada-3700-i2c", "simple-bus";
- reg = <0x0 0x11080 0x0 0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- #address-cells = <2>;
- #size-cells = <2>;
- status = "okay";
- };
+ network2 {
+ label = "udpu:red:network";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ };
- uart1: serial@12200 {
- compatible = "marvell,armada-3700-uart-ext";
- reg = <0x0 0x12200 0x0 0x30>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
- #address-cells = <2>;
- #size-cells = <2>;
- };
+ alarm1 {
+ label = "udpu:green:alarm";
+ gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+ };
- vcc_sd_reg0: regulator@0 {
- compatible = "regulator-gpio";
- regulator-name = "vcc_sd0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-type = "voltage";
- states = <1800000 0x1
- 3300000 0x0>;
- gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ alarm2 {
+ label = "udpu:red:alarm";
+ gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+ };
};
sfp_eth0: sfp-eth0 {
mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
sfp_eth1: sfp-eth1 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
- sfp,ethernet = <ð1>;
los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
};
-ð0 {
- pinctrl-0 = <&pcie_pins>;
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- phy = <ðphy0>;
- phys = <&comphy1 0>;
-};
-
-ð1 {
+&sdhci0 {
status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- phy = <ðphy1>;
- phys = <&comphy0 1>;
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ non-removable;
+ no-sd;
+ no-sdio;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q1024a","n25q512a";
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
- m25p,fast-read;
-
- partition@0 {
- label = "uboot";
- reg = <0 0x400000>;
+ spi-max-frequency = <54000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* only bootloader is located on the SPI */
+ partition@0 {
+ label = "uboot";
+ reg = <0 0x400000>;
+ };
};
};
};
-&sdhci0 {
- non-removable;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- bus-width = <4>;
- vqmmc-supply = <&vcc_sd_reg0>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio_pins>;
+&pinctrl_nb {
+ i2c1_recovery_pins: i2c1-recovery-pins {
+ groups = "i2c1";
+ function = "gpio";
+ };
+
+ i2c2_recovery_pins: i2c2-recovery-pins {
+ groups = "i2c2";
+ function = "gpio";
+ };
+};
+
+&i2c0 {
status = "okay";
+ pinctrl-names = "default", "recovery";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_recovery_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard@0 {
- compatible = "mmc-card";
- reg = <0>;
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "recovery";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&i2c2_recovery_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ lm75@48 {
+ status = "okay";
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ lm75@49 {
+ status = "okay";
+ compatible = "lm75";
+ reg = <0x49>;
};
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ð0 {
+ phy-mode = "sgmii";
status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy1 0>;
+ sfp = <&sfp_eth0>;
+};
+
+ð1 {
+ phy-mode = "sgmii";
+ status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy0 1>;
+ sfp = <&sfp_eth1>;
};
&usb3 {
status = "okay";
+ phys = <&usb2_utmi_otg_phy>;
+ phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+ status = "okay";
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada 372x family of SoCs
* (also named 88F3720)
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-37xx.dtsi"
compatible = "marvell,armada3720", "marvell,armada3710";
cpus {
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53","arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x1>;
+ clocks = <&nb_periph_clk 16>;
enable-method = "psci";
};
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada 37xx family of SoCs.
*
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/comphy/comphy_data.h>
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell Armada 37xx SoC";
aliases {
serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * The PSCI firmware region depicted below is the default one
+ * and should be updated by the bootloader.
+ */
+ psci-area@4000000 {
+ reg = <0 0x4000000 0 0x200000>;
+ no-map;
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0>;
+ clocks = <&nb_periph_clk 16>;
enable-method = "psci";
};
};
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
#size-cells = <2>;
ranges;
- internal-regs {
+ internal-regs@d0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
+ wdt: watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
+
+ cpu_misc: system-controller@d000 {
+ compatible = "marvell,armada-3700-cpu-misc",
+ "syscon";
+ reg = <0xd000 0x1000>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,armada-3700-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10600 0xA00>;
+ clocks = <&nb_periph_clk 7>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <4>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,armada-3700-i2c";
+ reg = <0x11000 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&nb_periph_clk 10>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11080 {
+ compatible = "marvell,armada-3700-i2c";
+ reg = <0x11080 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&nb_periph_clk 9>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ avs: avs@11500 {
+ compatible = "marvell,armada-3700-avs",
+ "syscon";
+ reg = <0x11500 0x40>;
+ };
+
uart0: serial@12000 {
compatible = "marvell,armada-3700-uart";
- reg = <0x12000 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12000 0x18>;
+ clocks = <&xtalclk>;
+ interrupts =
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart-sum", "uart-tx", "uart-rx";
status = "disabled";
};
- wdt: watchdog-timer@8300 {
- compatible = "marvell,armada-3700-wdt";
- reg = <0x8300 0x40>;
+ uart1: serial@12200 {
+ compatible = "marvell,armada-3700-uart-ext";
+ reg = <0x12200 0x30>;
+ clocks = <&xtalclk>;
+ interrupts =
+ <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "uart-tx", "uart-rx";
+ status = "disabled";
};
nb_periph_clk: nb-periph-clk@13000 {
- compatible = "marvell,armada-3700-periph-clock-nb";
+ compatible = "marvell,armada-3700-periph-clock-nb",
+ "syscon";
reg = <0x13000 0x100>;
- clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+ <&tbg 3>, <&xtalclk>;
#clock-cells = <1>;
};
sb_periph_clk: sb-periph-clk@18000 {
compatible = "marvell,armada-3700-periph-clock-sb";
reg = <0x18000 0x100>;
- clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+ <&tbg 3>, <&xtalclk>;
#clock-cells = <1>;
};
tbg: tbg@13200 {
compatible = "marvell,armada-3700-tbg-clock";
reg = <0x13200 0x100>;
+ clocks = <&xtalclk>;
#clock-cells = <1>;
};
- pinctrl_nb: pinctrl-nb@13800 {
+ pinctrl_nb: pinctrl@13800 {
compatible = "marvell,armada3710-nb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x13800 0x100>, <0x13C00 0x20>;
- gpionb: gpionb {
+ /* MPP1[19:0] */
+ gpionb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_nb 0 0 36>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts =
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ xtalclk: xtal-clk {
+ compatible = "marvell,armada-3700-xtal-clock";
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
};
spi_quad_pins: spi-quad-pins {
function = "spi";
};
+ spi_cs1_pins: spi-cs1-pins {
+ groups = "spi_cs1";
+ function = "spi";
+ };
+
i2c1_pins: i2c1-pins {
groups = "i2c1";
function = "i2c";
};
};
- pinctrl_sb: pinctrl-sb@18800 {
+ nb_pm: syscon@14000 {
+ compatible = "marvell,armada-3700-nb-pm",
+ "syscon";
+ reg = <0x14000 0x60>;
+ };
+
+ comphy: phy@18300 {
+ compatible = "marvell,comphy-a3700";
+ reg = <0x18300 0x300>,
+ <0x1F000 0x400>,
+ <0x5C000 0x400>,
+ <0xe0178 0x8>;
+ reg-names = "comphy",
+ "lane1_pcie_gbe",
+ "lane0_usb3_gbe",
+ "lane2_sata_usb3";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&xtalclk>;
+ clock-names = "xtal";
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
+ pinctrl_sb: pinctrl@18800 {
compatible = "marvell,armada3710-sb-pinctrl",
- "syscon", "simple-mfd";
+ "syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
- gpiosb: gpiosb {
+ /* MPP2[23:0] */
+ gpiosb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_sb 0 0 30>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts =
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
function = "sdio";
};
- pcie_pins: pcie-pins {
- groups = "pcie1";
+ pcie_reset_pins: pcie-reset-pins {
+ groups = "pcie1"; /* this actually controls "pcie1_reset" */
function = "gpio";
};
+
+ pcie_clkreq_pins: pcie-clkreq-pins {
+ groups = "pcie1_clkreq";
+ function = "pcie";
+ };
+ };
+
+ eth0: ethernet@30000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x30000 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 8>;
+ status = "disabled";
+ };
+
+ mdio: mdio@32004 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x32004 0x4>;
+ };
+
+ eth1: ethernet@40000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x40000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 7>;
+ status = "disabled";
};
usb3: usb@58000 {
compatible = "marvell,armada3700-xhci",
"generic-xhci";
reg = <0x58000 0x4000>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,usb-misc-reg = <&usb32_syscon>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 12>;
+ phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+ phy-names = "usb3-phy", "usb2-utmi-otg-phy";
status = "disabled";
};
+ usb2_utmi_otg_phy: phy@5d000 {
+ compatible = "marvell,a3700-utmi-otg-phy";
+ reg = <0x5d000 0x800>;
+ marvell,usb-misc-reg = <&usb32_syscon>;
+ #phy-cells = <0>;
+ };
+
+ usb32_syscon: system-controller@5d800 {
+ compatible = "marvell,armada-3700-usb2-host-device-misc",
+ "syscon";
+ reg = <0x5d800 0x800>;
+ };
+
usb2: usb@5e000 {
compatible = "marvell,armada-3700-ehci";
- reg = <0x5e000 0x450>;
+ reg = <0x5e000 0x1000>;
+ marvell,usb-misc-reg = <&usb2_syscon>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_utmi_host_phy>;
+ phy-names = "usb2-utmi-host-phy";
status = "disabled";
};
+ usb2_utmi_host_phy: phy@5f000 {
+ compatible = "marvell,a3700-utmi-host-phy";
+ reg = <0x5f000 0x800>;
+ marvell,usb-misc-reg = <&usb2_syscon>;
+ #phy-cells = <0>;
+ };
+
+ usb2_syscon: system-controller@5f800 {
+ compatible = "marvell,armada-3700-usb2-host-misc",
+ "syscon";
+ reg = <0x5f800 0x800>;
+ };
+
xor@60900 {
compatible = "marvell,armada-3700-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
+ reg = <0x60900 0x100>,
+ <0x60b00 0x100>;
xor10 {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
+ crypto: crypto@90000 {
+ compatible = "inside-secure,safexcel-eip97ies";
+ reg = <0x90000 0x20000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clocks = <&nb_periph_clk 15>;
+ };
+
+ rwtm: mailbox@b0000 {
+ compatible = "marvell,armada-3700-rwtm-mailbox";
+ reg = <0xb0000 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
+
sdhci1: sdhci@d0000 {
compatible = "marvell,armada-3700-sdhci",
- "marvell,sdhci-xenon";
- reg = <0xd0000 0x300
- 0x1e808 0x4>;
+ "marvell,sdhci-xenon";
+ reg = <0xd0000 0x300>,
+ <0x1e808 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
status = "disabled";
};
sdhci0: sdhci@d8000 {
compatible = "marvell,armada-3700-sdhci",
- "marvell,sdhci-xenon";
- reg = <0xd8000 0x300
- 0x17808 0x4>;
+ "marvell,sdhci-xenon";
+ reg = <0xd8000 0x300>,
+ <0x17808 0x4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
status = "disabled";
};
sata: sata@e0000 {
compatible = "marvell,armada-3700-ahci";
- reg = <0xe0000 0x2000>;
+ reg = <0xe0000 0x178>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 1>;
+ phys = <&comphy2 0>;
+ phy-names = "sata-phy";
status = "disabled";
};
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x1d00000 0x10000>, /* GICD */
- <0x1d40000 0x40000>; /* GICR */
- };
-
- eth0: neta@30000 {
- compatible = "marvell,armada-3700-neta";
- reg = <0x30000 0x20>;
- status = "disabled";
- };
-
- eth1: neta@40000 {
- compatible = "marvell,armada-3700-neta";
- reg = <0x40000 0x20>;
- status = "disabled";
- };
-
- i2c0: i2c@11000 {
- compatible = "marvell,armada-3700-i2c";
- reg = <0x11000 0x100>;
- status = "disabled";
- };
-
- spi0: spi@10600 {
- compatible = "marvell,armada-3700-spi";
- reg = <0x10600 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- spi-max-frequency = <50000000>;
- clocks = <&nb_periph_clk 7>;
- status = "disabled";
- };
-
- comphy: comphy@18300 {
- compatible = "marvell,comphy-a3700";
- reg = <0x18300 0x28>,
- <0x1f300 0x3d000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- comphy0: phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- comphy1: phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- comphy2: phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
+ <0x1d40000 0x40000>, /* GICR */
+ <0x1d80000 0x2000>, /* GICC */
+ <0x1d90000 0x2000>, /* GICH */
+ <0x1da0000 0x20000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
pcie0: pcie@d0070000 {
compatible = "marvell,armada-3700-pcie";
+ device_type = "pci";
+ status = "disabled";
reg = <0 0xd0070000 0 0x20000>;
#address-cells = <3>;
#size-cells = <2>;
- device_type = "pci";
- num-lanes = <1>;
- status = "disabled";
-
- bus-range = <0 0xff>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ msi-parent = <&pcie0>;
+ msi-controller;
/*
* The 128 MiB address range [0xe8000000-0xf0000000] is
* dedicated for PCIe and can be assigned to 8 windows
* IO at the end and the remaining seven windows
* (totaling 127 MiB) for MEM.
*/
- ranges = <0x82000000 0 0xe8000000
- 0 0xe8000000 0 0x7f00000 /* Port 0 MEM */
- 0x81000000 0 0xeff00000
- 0 0xeff00000 0 0x100000>; /* Port 0 IO*/
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */
+ 0x81000000 0 0xeff00000 0 0xeff00000 0 0x00100000>; /* Port 0 IO*/
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ max-link-speed = <2>;
+ phys = <&comphy1 0>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ firmware {
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware";
+ mboxes = <&rwtm 0>;
+ status = "okay";
};
};
};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Constant for device tree bindings for Turris Mox module configuration bus
+ *
+ * Copyright (C) 2019 Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef _DT_BINDINGS_BUS_MOXTET_H
+#define _DT_BINDINGS_BUS_MOXTET_H
+
+#define MOXTET_IRQ_PCI 0
+#define MOXTET_IRQ_USB3 4
+#define MOXTET_IRQ_PERIDOT(n) (8 + (n))
+#define MOXTET_IRQ_TOPAZ 12
+
+#endif /* _DT_BINDINGS_BUS_MOXTET_H */
projects / u-boot.git / commitdiff
