powerpc/t4240qds: Update DDR timing table

Update the timing table to support more rank density, based on the theory
that similar density DIMMs have similar clock adjust and write level start
timing. Update the timing for 1600 and 1866 MT/s. Tested with Micron
MT18JSF1G72AZ-1G9E1 DIMMs, iDIMM M3CN-4GMJ3C0C-M92.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
index 692616aed4d88f0f58a65f6a14ceef9c178bd203..058d62511f5979fef8c9fc72502af540b79aed33 100644 (file)
--- a/board/freescale/t4qds/ddr.c
+++ b/board/freescale/t4qds/ddr.c
@@ -19,6 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
 struct board_specific_parameters {
        u32 n_ranks;
        u32 datarate_mhz_high;
+       u32 rank_gb;
        u32 clk_adjust;
        u32 wrlvl_start;
        u32 wrlvl_ctl_2;
@@ -36,16 +37,19 @@ struct board_specific_parameters {
 static const struct board_specific_parameters udimm0[] = {
        /*
         * memory controller 0
-        *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-        * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+        *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+        * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
         */
-       {2,  1350,    5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
-       {2,  1666,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-       {2,  2140,    5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
-       {1,  1350,    5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-       {1,  1700,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-       {1,  1900,    4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-       {1,  2140,    4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+       {2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+       {2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
+       {2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
+       {2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
+       {2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+       {2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+       {1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+       {1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+       {1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+       {1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
        {}
 };
 
@@ -61,19 +65,19 @@ static const struct board_specific_parameters *udimms[] = {
 static const struct board_specific_parameters rdimm0[] = {
        /*
         * memory controller 0
-        *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-        * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+        *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+        * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
         */
-       {4,  1350,    5,     9, 0x08070605, 0x07080805,   0xff,    2,  0},
-       {4,  1666,    5,     8, 0x08070605, 0x07080805,   0xff,    2,  0},
-       {4,  2140,    5,     8, 0x08070605, 0x07081805,   0xff,    2,  0},
-       {2,  1350,    5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
-       {2,  1666,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-       {2,  2140,    5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
-       {1,  1350,    5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-       {1,  1700,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-       {1,  1900,    4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-       {1,  2140,    4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+       {4,  1350, 0, 5,     9, 0x08070605, 0x07080805,   0xff,    2,  0},
+       {4,  1666, 0, 5,     8, 0x08070605, 0x07080805,   0xff,    2,  0},
+       {4,  2140, 0, 5,     8, 0x08070605, 0x07081805,   0xff,    2,  0},
+       {2,  1350, 0, 5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
+       {2,  1666, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+       {2,  2140, 0, 5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+       {1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+       {1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+       {1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+       {1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
        {}
 };
 
@@ -113,7 +117,8 @@ void fsl_ddr_board_options(memctl_options_t *popts,
         */
        ddr_freq = get_ddr_freq(0) / 1000000;
        while (pbsp->datarate_mhz_high) {
-               if (pbsp->n_ranks == pdimm->n_ranks) {
+               if (pbsp->n_ranks == pdimm->n_ranks &&
+                   (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
                        if (ddr_freq <= pbsp->datarate_mhz_high) {
                                popts->cpo_override = pbsp->cpo;
                                popts->write_data_delay =
@@ -146,6 +151,13 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                panic("DIMM is not supported by this board");
        }
 found:
+       debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+               "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+               "wrlvl_ctrl_3 0x%x\n",
+               pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+               pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+               pbsp->wrlvl_ctl_3);
+
        /*
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed