CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
CONFIG_BOOTDELAY=0
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
CONFIG_SPL_BOARD_INIT=y
CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
# CONFIG_CMD_MII is not set
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
# CONFIG_CMD_MII is not set
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
DFU_ALT_INFO_QSPI
#else
#ifdef CONFIG_SPL_DFU
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_RAM
#define CONFIG_SPL_BSS_START_ADDR 0x04000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
-#ifndef CONFIG_XIP
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x00200000
-#else
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80010000
-#endif
-
#ifdef CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
#endif
#ifdef CONFIG_SPL_BUILD
#ifdef CONFIG_SPL_DFU
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_RAM
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
/* Image load address in RAM for DFU boot*/
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x81000000
#else
/*
* Maximum size in memory allocated to the SPL BSS. Keep it as tight as
#define CONFIG_SYS_SPL_MALLOC_START 0x84000000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
/* Image load address in RAM for DFU boot*/
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80080000
#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
-
#endif
#define CONFIG_SYS_SDRAM_BASE 0x80000000
CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x84000000
-
#define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \
GENERATED_GBL_DATA_SIZE)
/* ATF is my kernel image */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
-/* FIT load address for RAM boot */
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
-
/* MMC support */
#ifdef CONFIG_MMC_SDHCI_ZYNQ
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
#define CONFIG_SPL_BSS_START_ADDR 0x100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
-
#endif /* __CONFIG_ZYNQ_COMMON_H */
CONFIG_SPL_INIT_MINIMAL
CONFIG_SPL_JR0_LIODN_NS
CONFIG_SPL_JR0_LIODN_S
-CONFIG_SPL_LOAD_FIT_ADDRESS
CONFIG_SPL_MAX_FOOTPRINT
CONFIG_SPL_MAX_PEB_SIZE
CONFIG_SPL_MAX_SIZE