This SoC is too old. It is difficult to maintain any longer.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
uniphier-pxs2-vodka.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
uniphier-pxs3-ref.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER_SLD3) += \
- uniphier-sld3-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
uniphier-sld8-ref.dtb
+++ /dev/null
-/*
- * Device Tree Source for UniPhier sLD3 Reference Board
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/dts-v1/;
-/include/ "uniphier-sld3.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
-
-/ {
- model = "UniPhier sLD3 Reference Board";
- compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- };
-
- memory@8000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000
- 0xc0000000 0x20000000>;
- };
-};
-
-ðsc {
- interrupts = <0 49 4>;
-};
-
-&serial0 {
- status = "okay";
-};
-
-&serial1 {
- status = "okay";
-};
-
-&serial2 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&emmc {
- status = "okay";
-};
-
-&sd {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
-
-/* for U-Boot only */
-&serial0 {
- u-boot,dm-pre-reloc;
-};
-
-&emmc {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart0 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_emmc {
- u-boot,dm-pre-reloc;
-};
+++ /dev/null
-/*
- * Device Tree Source for UniPhier sLD3 SoC
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/ {
- compatible = "socionext,uniphier-sld3";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- clocks {
- refclk: ref {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24576000>;
- };
-
- arm_timer_clk: arm_timer_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
- u-boot,dm-pre-reloc;
-
- timer@20000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x20000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@20000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@20001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x20001000 0x1000>,
- <0x20000100 0x100>;
- };
-
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(512 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- interrupts = <0 33 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&sys_clk 0>;
- clock-frequency = <36864000>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- interrupts = <0 35 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&sys_clk 0>;
- clock-frequency = <36864000>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- interrupts = <0 37 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&sys_clk 0>;
- clock-frequency = <36864000>;
- };
-
- port0x: gpio@55000008 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000008 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port1x: gpio@55000010 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000010 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port2x: gpio@55000018 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000018 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port3x: gpio@55000020 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000020 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port4: gpio@55000028 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000028 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port5x: gpio@55000030 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000030 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port6x: gpio@55000038 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000038 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port7x: gpio@55000040 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000040 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port8x: gpio@55000048 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000048 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port9x: gpio@55000050 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000050 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port10x: gpio@55000058 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000058 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port11x: gpio@55000060 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000060 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port12x: gpio@55000068 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000068 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port13x: gpio@55000070 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000070 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port14x: gpio@55000078 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000078 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port16x: gpio@55000088 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000088 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 41 1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 42 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 43 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 44 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c4: i2c@58600000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58600000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 45 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <400000>;
- };
-
- system_bus: system-bus@58c00000 {
- compatible = "socionext,uniphier-system-bus";
- status = "disabled";
- reg = <0x58c00000 0x400>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- smpctrl@59801000 {
- compatible = "socionext,uniphier-smpctrl";
- reg = <0x59801000 0x400>;
- };
-
- mioctrl@59810000 {
- compatible = "socionext,uniphier-sld3-mioctrl",
- "simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
- u-boot,dm-pre-reloc;
-
- mio_clk: clock {
- compatible = "socionext,uniphier-sld3-mio-clock";
- #clock-cells = <1>;
- u-boot,dm-pre-reloc;
- };
-
- mio_rst: reset {
- compatible = "socionext,uniphier-sld3-mio-reset";
- #reset-cells = <1>;
- };
- };
-
- emmc: sdhc@5a400000 {
- compatible = "socionext,uniphier-sdhc";
- status = "disabled";
- reg = <0x5a400000 0x200>;
- interrupts = <0 78 4>;
- pinctrl-names = "default", "1.8v";
- pinctrl-0 = <&pinctrl_emmc>;
- pinctrl-1 = <&pinctrl_emmc_1v8>;
- clocks = <&mio_clk 1>;
- reset-names = "host", "bridge";
- resets = <&mio_rst 1>, <&mio_rst 4>;
- bus-width = <8>;
- non-removable;
- cap-mmc-highspeed;
- cap-mmc-hw-reset;
- };
-
- sd: sdhc@5a500000 {
- compatible = "socionext,uniphier-sdhc";
- status = "disabled";
- reg = <0x5a500000 0x200>;
- interrupts = <0 76 4>;
- pinctrl-names = "default", "1.8v";
- pinctrl-0 = <&pinctrl_sd>;
- pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio_clk 0>;
- reset-names = "host", "bridge";
- resets = <&mio_rst 0>, <&mio_rst 3>;
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- interrupts = <0 80 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
- <&mio_rst 12>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- interrupts = <0 81 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
- <&mio_rst 13>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- interrupts = <0 82 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
- <&mio_rst 14>;
- };
-
- usb3: usb@5a830100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a830100 0x100>;
- interrupts = <0 83 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
- clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
- <&mio_rst 15>;
- };
-
- soc-glue@5f800000 {
- compatible = "socionext,uniphier-sld3-soc-glue",
- "simple-mfd", "syscon";
- reg = <0x5f800000 0x2000>;
- u-boot,dm-pre-reloc;
-
- pinctrl: pinctrl {
- compatible = "socionext,uniphier-sld3-pinctrl";
- u-boot,dm-pre-reloc;
- };
- };
-
- aidet@f1830000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xf1830000 0x200>;
- };
-
- sysctrl@f1840000 {
- compatible = "socionext,uniphier-sld3-sysctrl",
- "simple-mfd", "syscon";
- reg = <0xf1840000 0x10000>;
-
- sys_clk: clock {
- compatible = "socionext,uniphier-sld3-clock";
- #clock-cells = <1>;
- };
-
- sys_rst: reset {
- compatible = "socionext,uniphier-sld3-reset";
- #reset-cells = <1>;
- };
- };
-
- nand: nand@f8000000 {
- compatible = "socionext,uniphier-denali-nand-v5a";
- status = "disabled";
- reg-names = "nand_data", "denali_reg";
- reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
- interrupts = <0 65 4>;
- clocks = <&sys_clk 2>;
- nand-ecc-strength = <8>;
- };
- };
-};
-
-/include/ "uniphier-pinctrl.dtsi"
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_PRO4
-config ARCH_UNIPHIER_SLD3
- bool "UniPhier sLD3 SoC"
- select ARCH_UNIPHIER_32BIT
-
config ARCH_UNIPHIER_LD4_SLD8
bool "UniPhier LD4/sLD8 SoCs"
select ARCH_UNIPHIER_32BIT
void __iomem *base = (void __iomem *)UNIPHIER_SSCC + 0xc00;
switch (readl(UNIPHIER_SSCID)) { /* revision */
- case 0x11: /* sLD3 */
- base = (void __iomem *)UNIPHIER_SSCC + 0x870;
- break;
case 0x12: /* LD4 */
case 0x16: /* sld8 */
base = (void __iomem *)UNIPHIER_SSCC + 0x840;
and r1, r1, #SG_REVISION_TYPE_MASK
mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
-#define UNIPHIER_SLD3_UART_CLK 36864000
- cmp r1, #0x25
- bne sld3_end
-
- sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0
-
- ldr r0, =BCSCR5
- ldr r1, =0x24440000
- str r1, [r0]
-
- ldr r0, =SC_CLKCTRL
- ldr r1, [r0]
- orr r1, r1, #SC_CLKCTRL_CEN_PERI
- str r1, [r0]
-
- ldr r3, =DIV_ROUND(UNIPHIER_SLD3_UART_CLK, 16 * BAUDRATE)
-
- b init_uart
-sld3_end:
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
#define UNIPHIER_LD4_UART_CLK 36864000
cmp r1, #0x26
/*
* Now we are using the page table embedded in the Boot ROM.
- * It is not handy since it is not a straight mapped table for sLD3.
- * Also, the access to the external bus is prohibited. What we need
- * to do next is to create a page table and switch over to it.
+ * What we need to do next is to create a page table and switch
+ * over to it.
*/
bl create_page_table
bl __v7_flush_dcache_all
static int uniphier_get_nr_cpus(void)
{
switch (uniphier_get_soc_id()) {
- case UNIPHIER_SLD3_ID:
case UNIPHIER_PRO4_ID:
case UNIPHIER_PRO5_ID:
return 2;
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += bcu-sld3.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += bcu-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += bcu-ld4.o
+++ /dev/null
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- * Copyright (C) 2015-2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "bcu-regs.h"
-
-#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
-
-void uniphier_sld3_bcu_init(const struct uniphier_board_data *bd)
-{
- int shift;
-
- writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */
- writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */
- writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */
- /*
- * 0xe0000000-0xefffffff: Ex-bus
- * 0xf0000000-0xfbffffff: ASM bus
- * 0xfc000000-0xffffffff: OCM bus
- */
- writel(0x24440000, BCSCR5);
-
- /* Specify DDR channel */
- shift = bd->dram_ch[0].size / 0x04000000 * 4;
- writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
-
- shift -= 32;
- writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */
-
- shift -= 32;
- writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
-}
};
static const struct uniphier_initdata uniphier_initdata[] = {
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- {
- .soc_id = UNIPHIER_SLD3_ID,
- .nand_2cs = true,
- .sbc_init = uniphier_sbc_init_admulti,
- .pll_init = uniphier_sld3_pll_init,
- .clk_init = uniphier_ld4_clk_init,
- },
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
{
.soc_id = UNIPHIER_LD4_ID,
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
-static const struct uniphier_board_data uniphier_sld3_data = {
- .dram_freq = 1600,
- .dram_ch[0] = {
- .size = 0x20000000,
- .width = 32,
- },
- .dram_ch[1] = {
- .size = 0x20000000,
- .width = 16,
- },
- .dram_ch[2] = {
- .size = 0x10000000,
- .width = 16,
- },
- .flags = UNIPHIER_BD_DRAM_SPARSE,
-};
-#endif
-
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
static const struct uniphier_board_data uniphier_ld4_data = {
.dram_freq = 1600,
};
static const struct uniphier_board_id uniphier_boards[] = {
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- { "socionext,uniphier-sld3", &uniphier_sld3_data, },
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
{ "socionext,uniphier-ld4", &uniphier_ld4_data, },
#endif
obj-y += boot-device.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += boot-device-sld3.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += boot-device-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += boot-device-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += boot-device-ld4.o
+++ /dev/null
-/*
- * Copyright (C) 2014 Panasonic Corporation
- * Copyright (C) 2015-2017 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include "boot-device.h"
-
-const struct uniphier_boot_device uniphier_sld3_boot_device_table[] = {
- {BOOT_DEVICE_NOR, "NOR (XECS0)"},
- {BOOT_DEVICE_NONE, "External Master"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_MMC1, "eMMC (3.3V, Boot Oparation)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_MMC1, "eMMC (1.8V, Boot Oparation)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_MMC1, "eMMC (3.3V, Normal)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_MMC1, "eMMC (1.8V, Normal)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
-};
-
-const unsigned uniphier_sld3_boot_device_count =
- ARRAY_SIZE(uniphier_sld3_boot_device_table);
};
static const struct uniphier_boot_device_info uniphier_boot_device_info[] = {
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- {
- .soc_id = UNIPHIER_SLD3_ID,
- .boot_device_sel_shift = 0,
- .boot_device_table = uniphier_sld3_boot_device_table,
- .boot_device_count = &uniphier_sld3_boot_device_count,
- .have_internal_stm = 0,
- },
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
{
.soc_id = UNIPHIER_LD4_ID,
const char *desc;
};
-extern const struct uniphier_boot_device uniphier_sld3_boot_device_table[];
extern const struct uniphier_boot_device uniphier_ld4_boot_device_table[];
extern const struct uniphier_boot_device uniphier_pro5_boot_device_table[];
extern const struct uniphier_boot_device uniphier_pxs2_boot_device_table[];
extern const struct uniphier_boot_device uniphier_ld11_boot_device_table[];
extern const struct uniphier_boot_device uniphier_pxs3_boot_device_table[];
-extern const unsigned int uniphier_sld3_boot_device_count;
extern const unsigned int uniphier_ld4_boot_device_count;
extern const unsigned int uniphier_pro5_boot_device_count;
extern const unsigned int uniphier_pxs2_boot_device_count;
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-early-sld3.o clk-dram-sld3.o dpll-sld3.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-sld3.o clk-dram-sld3.o dpll-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-sld3.o clk-dram-sld3.o dpll-pro4.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-early-sld3.o clk-dram-sld3.o dpll-sld8.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-early-sld3.o clk-dram-pro5.o dpll-pro5.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-early-ld4.o clk-dram-ld4.o dpll-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-early-ld4.o clk-dram-pro5.o dpll-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-early-ld4.o clk-dram-pxs2.o dpll-pxs2.o
else
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o pll-sld3.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o pll-pro4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o
#include "../init.h"
#include "../sc-regs.h"
-void uniphier_sld3_dram_clk_init(void)
+void uniphier_ld4_dram_clk_init(void)
{
u32 tmp;
#include "../init.h"
#include "../sc-regs.h"
-void uniphier_sld3_early_clk_init(void)
+void uniphier_ld4_early_clk_init(void)
{
u32 tmp;
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "../init.h"
-
-int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd)
-{
- /* add pll init code here */
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "../init.h"
-#include "pll.h"
-
-void uniphier_sld3_pll_init(void)
-{
- uniphier_ld4_dpll_ssc_en();
-}
puts("SoC: ");
switch (id) {
- case UNIPHIER_SLD3_ID:
- puts("sLD3");
- required_model = 2;
- break;
case UNIPHIER_LD4_ID:
puts("LD4");
required_rev = 2;
#
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += debug-uart-sld3.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += debug-uart-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += debug-uart-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += debug-uart-sld8.o
+++ /dev/null
-/*
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "../bcu/bcu-regs.h"
-#include "../sc-regs.h"
-#include "../sg-regs.h"
-#include "debug-uart.h"
-
-#define UNIPHIER_SLD3_UART_CLK 36864000
-
-unsigned int uniphier_sld3_debug_uart_init(void)
-{
- u32 tmp;
-
- sg_set_pinsel(64, 1, 4, 4); /* TXD0 -> TXD0 */
-
- writel(0x24440000, BCSCR5);
-
- tmp = readl(SC_CLKCTRL);
- tmp |= SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
-
- return DIV_ROUND_CLOSEST(UNIPHIER_SLD3_UART_CLK, 16 * CONFIG_BAUDRATE);
-}
unsigned int divisor;
switch (uniphier_get_soc_id()) {
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- case UNIPHIER_SLD3_ID:
- divisor = uniphier_sld3_debug_uart_init();
- break;
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
case UNIPHIER_LD4_ID:
divisor = uniphier_ld4_debug_uart_init();
#ifndef _MACH_DEBUG_UART_H
#define _MACH_DEBUG_UART_H
-unsigned int uniphier_sld3_debug_uart_init(void);
unsigned int uniphier_ld4_debug_uart_init(void);
unsigned int uniphier_pro4_debug_uart_init(void);
unsigned int uniphier_sld8_debug_uart_init(void);
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += umc-sld3.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += umc-ld4.o \
ddrphy-training.o ddrphy-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += umc-pro4.o \
+++ /dev/null
-#include "../init.h"
-
-int uniphier_sld3_umc_init(const struct uniphier_board_data *bd)
-{
- return 0;
-}
};
static const struct uniphier_memif_data uniphier_memif_data[] = {
- {
- .soc_id = UNIPHIER_SLD3_ID,
- .sparse_ch1_base = 0xc0000000,
- /*
- * In fact, SLD3 has DRAM ch2, but the memory regions for ch1
- * and ch2 overlap, and host cannot get access to them at the
- * same time. Hide the ch2 from U-Boot.
- */
- },
{
.soc_id = UNIPHIER_LD4_ID,
.sparse_ch1_base = 0xc0000000,
const struct uniphier_board_data *uniphier_get_board_param(void);
-int uniphier_sld3_init(const struct uniphier_board_data *bd);
int uniphier_ld4_init(const struct uniphier_board_data *bd);
int uniphier_pro4_init(const struct uniphier_board_data *bd);
int uniphier_sld8_init(const struct uniphier_board_data *bd);
}
#endif
-void uniphier_sld3_bcu_init(const struct uniphier_board_data *bd);
void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd);
int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd);
-int uniphier_memconf_3ch_no_disbit_init(const struct uniphier_board_data *bd);
int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd);
-int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd);
int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd);
int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd);
int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd);
int uniphier_pro5_dpll_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_dpll_init(const struct uniphier_board_data *bd);
-void uniphier_sld3_early_clk_init(void);
+void uniphier_ld4_early_clk_init(void);
-void uniphier_sld3_dram_clk_init(void);
+void uniphier_ld4_dram_clk_init(void);
void uniphier_pro5_dram_clk_init(void);
void uniphier_pxs2_dram_clk_init(void);
-int uniphier_sld3_umc_init(const struct uniphier_board_data *bd);
int uniphier_ld4_umc_init(const struct uniphier_board_data *bd);
int uniphier_pro4_umc_init(const struct uniphier_board_data *bd);
int uniphier_sld8_umc_init(const struct uniphier_board_data *bd);
int uniphier_pro5_umc_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd);
-void uniphier_sld3_pll_init(void);
void uniphier_ld4_pll_init(void);
void uniphier_pro4_pll_init(void);
void uniphier_ld11_pll_init(void);
#include "init.h"
static int __uniphier_memconf_init(const struct uniphier_board_data *bd,
- int have_ch2, int have_ch2_disable_bit)
+ int have_ch2)
{
u32 val = 0;
unsigned long size_per_word;
goto out;
if (!bd->dram_ch[2].size) {
- if (have_ch2_disable_bit)
- val |= SG_MEMCONF_CH2_DISABLE;
+ val |= SG_MEMCONF_CH2_DISABLE;
goto out;
}
int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd)
{
- return __uniphier_memconf_init(bd, 0, 0);
-}
-
-int uniphier_memconf_3ch_no_disbit_init(const struct uniphier_board_data *bd)
-{
- return __uniphier_memconf_init(bd, 1, 0);
+ return __uniphier_memconf_init(bd, 0);
}
int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd)
{
- return __uniphier_memconf_init(bd, 1, 1);
+ return __uniphier_memconf_init(bd, 1);
}
struct mmc *mmc;
/*
- * work around a bug in the Boot ROM of PH1-sLD3, LD4, Pro4, and sLD8:
+ * work around a bug in the Boot ROM of LD4, Pro4, and sLD8:
*
* The boot ROM in these SoCs breaks the PARTITION_CONFIG [179] of
* Extended CSD register; when switching to the Boot Partition 1, the
#ifndef ARCH_SC_REGS_H
#define ARCH_SC_REGS_H
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
-#define SC_BASE_ADDR 0xf1840000
-#else
#define SC_BASE_ADDR 0x61840000
-#endif
#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110)
#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1)
#include <linux/kernel.h>
#include <linux/stddef.h>
-#define UNIPHIER_SLD3_ID 0x25
#define UNIPHIER_LD4_ID 0x26
#define UNIPHIER_PRO4_ID 0x28
#define UNIPHIER_SLD8_ID 0x29
};
static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- {
- .soc_id = UNIPHIER_SLD3_ID,
- .bcu_init = uniphier_sld3_bcu_init,
- .early_clk_init = uniphier_sld3_early_clk_init,
- .dpll_init = uniphier_sld3_dpll_init,
- .memconf_init = uniphier_memconf_3ch_no_disbit_init,
- .dram_clk_init = uniphier_sld3_dram_clk_init,
- .umc_init = uniphier_sld3_umc_init,
- },
-#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
{
.soc_id = UNIPHIER_LD4_ID,
.bcu_init = uniphier_ld4_bcu_init,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_ld4_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
- .dram_clk_init = uniphier_sld3_dram_clk_init,
+ .dram_clk_init = uniphier_ld4_dram_clk_init,
.umc_init = uniphier_ld4_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
{
.soc_id = UNIPHIER_PRO4_ID,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_pro4_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
- .dram_clk_init = uniphier_sld3_dram_clk_init,
+ .dram_clk_init = uniphier_ld4_dram_clk_init,
.umc_init = uniphier_pro4_umc_init,
},
#endif
{
.soc_id = UNIPHIER_SLD8_ID,
.bcu_init = uniphier_ld4_bcu_init,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_sld8_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
- .dram_clk_init = uniphier_sld3_dram_clk_init,
+ .dram_clk_init = uniphier_ld4_dram_clk_init,
.umc_init = uniphier_sld8_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
{
.soc_id = UNIPHIER_PRO5_ID,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_pro5_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_pro5_dram_clk_init,
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
{
.soc_id = UNIPHIER_PXS2_ID,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_pxs2_dpll_init,
.memconf_init = uniphier_memconf_3ch_init,
.dram_clk_init = uniphier_pxs2_dram_clk_init,
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
{
.soc_id = UNIPHIER_LD6B_ID,
- .early_clk_init = uniphier_sld3_early_clk_init,
+ .early_clk_init = uniphier_ld4_early_clk_init,
.dpll_init = uniphier_pxs2_dpll_init,
.memconf_init = uniphier_memconf_3ch_init,
.dram_clk_init = uniphier_pxs2_dram_clk_init,
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_ARCH_UNIPHIER_SLD3=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-sld3-ref"
-# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
-CONFIG_SPL=y
-CONFIG_SPL_NOR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CONFIG=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_GPIO_UNIPHIER=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_MMC_UNIPHIER=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_STORAGE=y
Board | <defconfig> | <device-tree>
---------------|------------------------------|------------------------------
-sLD3 reference | uniphier_sld3_defconfig | uniphier-sld3-ref (default)
LD4 reference | uniphier_ld4_sld8_defconfig | uniphier-ld4-ref (default)
sld8 reference | uniphier_ld4_sld8_defconfig | uniphier-sld8-def
Pro4 reference | uniphier_pro4_defconfig | uniphier-pro4-ref (default)
}
static const struct udevice_id uniphier_clk_match[] = {
- {
- .compatible = "socionext,uniphier-sld3-mio-clock",
- .data = (ulong)&uniphier_mio_clk_data,
- },
{
.compatible = "socionext,uniphier-ld4-mio-clock",
.data = (ulong)&uniphier_mio_clk_data,
UNIPHIER_MIO_CLK_USB2(8, 0),
UNIPHIER_MIO_CLK_USB2(9, 1),
UNIPHIER_MIO_CLK_USB2(10, 2),
- UNIPHIER_MIO_CLK_USB2(11, 3), /* for PH1-sLD3 only */
UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
- UNIPHIER_MIO_CLK_USB2_PHY(15, 3), /* for PH1-sLD3 only */
UNIPHIER_CLK_END
};
config PINCTRL_UNIPHIER
bool
-config PINCTRL_UNIPHIER_SLD3
- bool "UniPhier sLD3 SoC pinctrl driver"
- depends on ARCH_UNIPHIER_SLD3
- default y
- select PINCTRL_UNIPHIER
-
config PINCTRL_UNIPHIER_LD4
bool "UniPhier LD4 SoC pinctrl driver"
depends on ARCH_UNIPHIER_LD4
obj-y += pinctrl-uniphier-core.o
-obj-$(CONFIG_PINCTRL_UNIPHIER_SLD3) += pinctrl-uniphier-sld3.o
obj-$(CONFIG_PINCTRL_UNIPHIER_LD4) += pinctrl-uniphier-ld4.o
obj-$(CONFIG_PINCTRL_UNIPHIER_PRO4) += pinctrl-uniphier-pro4.o
obj-$(CONFIG_PINCTRL_UNIPHIER_SLD8) += pinctrl-uniphier-sld8.o
+++ /dev/null
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <dm/pinctrl.h>
-
-#include "pinctrl-uniphier.h"
-
-static const unsigned emmc_pins[] = {55, 56, 60};
-static const int emmc_muxvals[] = {1, 1, 1};
-static const unsigned emmc_dat8_pins[] = {57};
-static const int emmc_dat8_muxvals[] = {1};
-static const unsigned ether_mii_pins[] = {35, 107, 108, 109, 110, 111, 112,
- 113};
-static const int ether_mii_muxvals[] = {1, 2, 2, 2, 2, 2, 2, 2};
-static const unsigned ether_rmii_pins[] = {35};
-static const int ether_rmii_muxvals[] = {1};
-static const unsigned i2c0_pins[] = {36};
-static const int i2c0_muxvals[] = {0};
-static const unsigned nand_pins[] = {38, 39, 40, 58, 59};
-static const int nand_muxvals[] = {1, 1, 1, 1, 1};
-static const unsigned nand_cs1_pins[] = {41};
-static const int nand_cs1_muxvals[] = {1};
-static const unsigned sd_pins[] = {42, 43, 44, 45};
-static const int sd_muxvals[] = {1, 1, 1, 1};
-static const unsigned system_bus_pins[] = {46, 50, 51, 53, 54, 73, 74, 75, 76,
- 77, 78, 79, 80, 88, 89, 91, 92, 99};
-static const int system_bus_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1};
-static const unsigned system_bus_cs0_pins[] = {93};
-static const int system_bus_cs0_muxvals[] = {1};
-static const unsigned system_bus_cs1_pins[] = {94};
-static const int system_bus_cs1_muxvals[] = {1};
-static const unsigned system_bus_cs2_pins[] = {95};
-static const int system_bus_cs2_muxvals[] = {1};
-static const unsigned system_bus_cs3_pins[] = {96};
-static const int system_bus_cs3_muxvals[] = {1};
-static const unsigned system_bus_cs4_pins[] = {81};
-static const int system_bus_cs4_muxvals[] = {1};
-static const unsigned system_bus_cs5_pins[] = {82};
-static const int system_bus_cs5_muxvals[] = {1};
-static const unsigned uart0_pins[] = {63, 64};
-static const int uart0_muxvals[] = {0, 1};
-static const unsigned uart1_pins[] = {65, 66};
-static const int uart1_muxvals[] = {0, 1};
-static const unsigned uart2_pins[] = {96, 102};
-static const int uart2_muxvals[] = {2, 2};
-static const unsigned usb0_pins[] = {13, 14};
-static const int usb0_muxvals[] = {0, 1};
-static const unsigned usb1_pins[] = {15, 16};
-static const int usb1_muxvals[] = {0, 1};
-static const unsigned usb2_pins[] = {17, 18};
-static const int usb2_muxvals[] = {0, 1};
-static const unsigned usb3_pins[] = {19, 20};
-static const int usb3_muxvals[] = {0, 1};
-
-static const struct uniphier_pinctrl_group uniphier_sld3_groups[] = {
- UNIPHIER_PINCTRL_GROUP_SPL(emmc),
- UNIPHIER_PINCTRL_GROUP_SPL(emmc_dat8),
- UNIPHIER_PINCTRL_GROUP(ether_mii),
- UNIPHIER_PINCTRL_GROUP(ether_rmii),
- UNIPHIER_PINCTRL_GROUP(i2c0),
- UNIPHIER_PINCTRL_GROUP(nand),
- UNIPHIER_PINCTRL_GROUP(nand_cs1),
- UNIPHIER_PINCTRL_GROUP(sd),
- UNIPHIER_PINCTRL_GROUP(system_bus),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs0),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs1),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs2),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs3),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs4),
- UNIPHIER_PINCTRL_GROUP(system_bus_cs5),
- UNIPHIER_PINCTRL_GROUP_SPL(uart0),
- UNIPHIER_PINCTRL_GROUP_SPL(uart1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart2),
- UNIPHIER_PINCTRL_GROUP(usb0),
- UNIPHIER_PINCTRL_GROUP(usb1),
- UNIPHIER_PINCTRL_GROUP(usb2),
- UNIPHIER_PINCTRL_GROUP(usb3)
-};
-
-static const char * const uniphier_sld3_functions[] = {
- UNIPHIER_PINMUX_FUNCTION_SPL(emmc),
- UNIPHIER_PINMUX_FUNCTION(ether_mii),
- UNIPHIER_PINMUX_FUNCTION(ether_rmii),
- UNIPHIER_PINMUX_FUNCTION(i2c0),
- UNIPHIER_PINMUX_FUNCTION(nand),
- UNIPHIER_PINMUX_FUNCTION(sd),
- UNIPHIER_PINMUX_FUNCTION(system_bus),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart0),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart1),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart2),
- UNIPHIER_PINMUX_FUNCTION(usb0),
- UNIPHIER_PINMUX_FUNCTION(usb1),
- UNIPHIER_PINMUX_FUNCTION(usb2),
- UNIPHIER_PINMUX_FUNCTION(usb3),
-};
-
-static struct uniphier_pinctrl_socdata uniphier_sld3_pinctrl_socdata = {
- .groups = uniphier_sld3_groups,
- .groups_count = ARRAY_SIZE(uniphier_sld3_groups),
- .functions = uniphier_sld3_functions,
- .functions_count = ARRAY_SIZE(uniphier_sld3_functions),
- .caps = UNIPHIER_PINCTRL_CAPS_MUX_4BIT,
-};
-
-static int uniphier_sld3_pinctrl_probe(struct udevice *dev)
-{
- return uniphier_pinctrl_probe(dev, &uniphier_sld3_pinctrl_socdata);
-}
-
-static const struct udevice_id uniphier_sld3_pinctrl_match[] = {
- { .compatible = "socionext,uniphier-sld3-pinctrl" },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(uniphier_sld3_pinctrl) = {
- .name = "uniphier-sld3-pinctrl",
- .id = UCLASS_PINCTRL,
- .of_match = of_match_ptr(uniphier_sld3_pinctrl_match),
- .probe = uniphier_sld3_pinctrl_probe,
- .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
- .ops = &uniphier_pinctrl_ops,
-};
#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch) \
UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17)
-static const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld4_sys_reset_data[] = {
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* Ether, HSC, MIO */
UNIPHIER_RESET_END,
};
static const struct udevice_id uniphier_reset_match[] = {
/* System reset */
- {
- .compatible = "socionext,uniphier-sld3-reset",
- .data = (ulong)uniphier_sld3_sys_reset_data,
- },
{
.compatible = "socionext,uniphier-ld4-reset",
- .data = (ulong)uniphier_sld3_sys_reset_data,
+ .data = (ulong)uniphier_ld4_sys_reset_data,
},
{
.compatible = "socionext,uniphier-pro4-reset",
},
{
.compatible = "socionext,uniphier-sld8-reset",
- .data = (ulong)uniphier_sld3_sys_reset_data,
+ .data = (ulong)uniphier_ld4_sys_reset_data,
},
{
.compatible = "socionext,uniphier-pro5-reset",
.data = (ulong)uniphier_ld20_sys_reset_data,
},
/* Media I/O reset */
- {
- .compatible = "socionext,uniphier-sld3-mio-clock",
- .data = (ulong)uniphier_mio_reset_data,
- },
{
.compatible = "socionext,uniphier-ld4-mio-reset",
.data = (ulong)uniphier_mio_reset_data,
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
-#ifdef CONFIG_ARCH_UNIPHIER_SLD3
-#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
-#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
-#else
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
-#endif
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
-#if defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
- defined(CONFIG_ARCH_UNIPHIER_LD4) || \
+#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
#else
projects / u-boot.git / commitdiff
