From: Heiko Schocher <hs@denx.de>
Date: Tue, 2 Feb 2016 10:54:35 +0000 (+0100)
Subject: mtd, ubi: set free_count to zero before walking through erase list
X-Git-Tag: v2025.01-rc5-pxa1908~9560^2~1
X-Git-Url: http://git.dujemihanovic.xyz/img/login.html?a=commitdiff_plain;h=68fc449033732e7eb2aa022f9ef1b292f6871b8c;p=u-boot.git

mtd, ubi: set free_count to zero before walking through erase list

Set free_count to zero before walking through ai->erase list
in wl_init().

As U-Boot has no workqueue/threads, it immediately calls
erase_worker(), which increase for each erased block
free_count. Without this patch, free_count gets after
this initialized to zero in wl_init(), so the free_count
variable always has the maybe wrong value 0.

Detected this behaviour on the dxr2 board, where the
UBI fastmap gets not written when attaching/dettaching
on an empty NAND. It drops instead the error message:

could not find any anchor PEB

With this patch, fastmap gets written on dettach.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 507b091720..e823ca56f2 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1528,6 +1528,7 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		INIT_LIST_HEAD(&ubi->pq[i]);
 	ubi->pq_head = 0;
 
+	ubi->free_count = 0;
 	list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) {
 		cond_resched();
 
@@ -1546,7 +1547,6 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		found_pebs++;
 	}
 
-	ubi->free_count = 0;
 	list_for_each_entry(aeb, &ai->free, u.list) {
 		cond_resched();