From: Duje Mihanović <duje.mihanovic@skole.hr>
Date: Wed, 18 Dec 2024 15:57:28 +0000 (+0100)
Subject: slim down DTs
X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/login.html?a=commitdiff_plain;h=80d51b63ff48daa04aa29bf10deb223d7a734958;p=u-boot.git
slim down DTs
---
diff --git a/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts
index 5749b5f568..a7d3ce278f 100644
--- a/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts
@@ -9,9 +9,6 @@
compatible = "samsung,coreprimevelte", "marvell,pxa1908";
aliases {
- mmc0 = &sdh2; /* eMMC */
- mmc1 = &sdh0; /* SD card */
- mmc2 = &sdh1; /* SDIO */
serial0 = &uart0;
};
@@ -77,76 +74,6 @@
max-reason = <5>;
};
};
-
-
- i2c-muic {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <3>;
- i2c-gpio,timeout-ms = <100>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_muic_pins>;
-
- muic: extcon@14 {
- compatible = "siliconmitus,sm5504-muic";
- reg = <0x14>;
- interrupt-parent = <&gpio>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pins>;
- autorepeat;
-
- key-home {
- label = "Home";
- linux,code = <KEY_HOME>;
- gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
- };
-
- key-volup {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- key-voldown {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- backlight {
- compatible = "kinetic,ktd2801";
- ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
- max-brightness = <210>;
- };
-
- wlan_pwrseq: pwrseq0 {
- compatible = "mmc-pwrseq-simple";
- powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
- };
-
- vibrator {
- compatible = "pwm-vibrator";
- pwm-names = "enable";
- pwms = <&pwm 100000>;
- enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_pins>;
- };
-};
-
-&smmu {
- status = "okay";
};
&pmx {
@@ -476,127 +403,3 @@
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
-
-&twsi0 {
- status = "okay";
-};
-
-&twsi1 {
- status = "okay";
-};
-
-&twsi2 {
- status = "okay";
-
- pmic@30 {
- compatible = "marvell,88pm886-a1";
- reg = <0x30>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- onkey {
- compatible = "marvell,88pm88x-onkey";
- wakeup-source;
- };
-
- regulators {
- ldo2: ldo2 {
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo15: ldo15 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- buck2: buck2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
- };
-};
-
-&twsi3 {
- status = "okay";
-
- touchscreen@50 {
- compatible = "imagis,ist3032c";
- reg = <0x50>;
- interrupt-parent = <&gpio>;
- interrupts = <72 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&ldo2>;
- touchscreen-size-x = <480>;
- touchscreen-size-y = <800>;
- linux,code = <KEY_APPSELECT>, <KEY_BACK>;
- };
-};
-
-&usb {
- extcon = <&muic>, <&muic>;
-};
-
-&sdh2 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sdh2_pins_1 &sdh2_pins_2 &sdh2_pins_3>;
- pinctrl-1 = <&sdh2_pins_1_fast &sdh2_pins_2_fast &sdh2_pins_3_fast>;
- bus-width = <8>;
- non-removable;
- mmc-ddr-1_8v;
-};
-
-&sdh0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>;
- cd-gpios = <&gpio 11 0>;
- cd-inverted;
- bus-width = <4>;
- wp-inverted;
-};
-
-&sdh1 {
- status = "okay";
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sdh1_pins_1 &sdh1_pins_2 &sdh1_pins_3>;
- pinctrl-1 = <&sdh1_pins_1_fast &sdh1_pins_2_fast &sdh1_pins_3>;
- pinctrl-2 = <&sdh1_edge_wakeup>;
- bus-width = <4>;
- max-frequency = <200000000>;
- cap-sd-highspeed;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- keep-power-in-suspend;
- wakeup-source;
- cap-sdio-irq;
- vmmc-supply = <&ldo15>;
- vqmmc-supply = <&buck2>;
- mmc-pwrseq = <&wlan_pwrseq>;
- non-removable;
- cap-power-off-card;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- mwifiex: wifi@1 {
- compatible = "marvell,sd8777";
- reg = <1>;
- interrupt-parent = <&gpio>;
- interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
- marvell,wakeup-pin = <3>;
- };
-
- btmrvl: bluetooth@2 {
- compatible = "marvell,sd8777-bt";
- reg = <2>;
- interrupt-parent = <&gpio>;
- interrupts = <40 IRQ_TYPE_LEVEL_LOW>;
-
- marvell,cal-data = /bits/ 8 <
- 0x00 0x1c 0xfa 0x37 0xff 0xff 0xff 0xff 0x00 0x0d 0x7f 0x01
- 0xce 0xba 0x00 0x00 0x00 0x2d 0xc6 0xc0 0x00 0x00 0x00 0x00
- 0x00 0xf0 0x00 0x00>;
- };
-};
diff --git a/arch/arm/dts/pxa1908.dtsi b/arch/arm/dts/pxa1908.dtsi
index b0c9f80d78..8db4978646 100644
--- a/arch/arm/dts/pxa1908.dtsi
+++ b/arch/arm/dts/pxa1908.dtsi
@@ -44,15 +44,6 @@
};
};
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -72,16 +63,6 @@
#size-cells = <2>;
ranges;
- smmu: iommu@c0010000 {
- compatible = "arm,mmu-400";
- reg = <0 0xc0010000 0 0x10000>;
- #global-interrupts = <1>;
- #iommu-cells = <1>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
gic: interrupt-controller@d1df9000 {
compatible = "arm,gic-400";
reg = <0 0xd1df9000 0 0x1000>,
@@ -101,53 +82,6 @@
#size-cells = <1>;
ranges = <0 0 0xd4000000 0x200000>;
- pdma: dma-controller@0 {
- compatible = "marvell,pdma-1.0";
- reg = <0 0x10000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- dma-channels = <30>;
- #dma-cells = <2>;
- };
-
- twsi1: i2c@10800 {
- compatible = "mrvl,mmp-twsi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x10800 0x64>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apbc PXA1908_CLK_TWSI1>;
- mrvl,i2c-fast-mode;
- status = "disabled";
- };
-
- twsi0: i2c@11000 {
- compatible = "mrvl,mmp-twsi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11000 0x64>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apbc PXA1908_CLK_TWSI0>;
- mrvl,i2c-fast-mode;
- status = "disabled";
- };
-
- twsi3: i2c@13800 {
- compatible = "mrvl,mmp-twsi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x13800 0x64>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apbc PXA1908_CLK_TWSI3>;
- mrvl,i2c-fast-mode;
- status = "disabled";
- };
-
- apbc: clock-controller@15000 {
- compatible = "marvell,pxa1908-apbc";
- reg = <0x15000 0x1000>;
- #clock-cells = <1>;
- };
-
uart0: serial@17000 {
compatible = "mrvl,mmp-uart", "intel,xscale-uart", "ns16550";
reg = <0x17000 0x1000>;
@@ -164,44 +98,6 @@
reg-shift = <2>;
};
- gpio: gpio@19000 {
- compatible = "marvell,mmp-gpio";
- reg = <0x19000 0x800>;
- #address-cells = <1>;
- #size-cells = <1>;
- gpio-controller;
- #gpio-cells = <2>;
- clocks = <&apbc PXA1908_CLK_GPIO>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpio_mux";
- interrupt-controller;
- #interrupt-cells = <2>;
- ranges = <0 0x19000 0x800>;
-
- gpio@0 {
- reg = <0x0 0x4>;
- };
-
- gpio@4 {
- reg = <0x4 0x4>;
- };
-
- gpio@8 {
- reg = <0x8 0x4>;
- };
-
- gpio@100 {
- reg = <0x100 0x4>;
- };
- };
-
- pwm: pwm@1ac00 {
- compatible = "marvell,pxa250-pwm";
- reg = <0x1ac00 0x10>;
- #pwm-cells = <1>;
- clocks = <&apbc PXA1908_CLK_PWM3>;
- };
-
pmx: pinmux@1e000 {
compatible = "marvell,pxa1908-padconf", "pinconf-single";
reg = <0x1e000 0x330>;
@@ -227,17 +123,6 @@
reg-shift = <2>;
};
- twsi2: i2c@37000 {
- compatible = "mrvl,mmp-twsi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x37000 0x64>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apbcp PXA1908_CLK_TWSI2>;
- mrvl,i2c-fast-mode;
- status = "disabled";
- };
-
apbcp: clock-controller@3b000 {
compatible = "marvell,pxa1908-apbcp";
reg = <0x3b000 0x1000>;
@@ -250,62 +135,5 @@
#clock-cells = <1>;
};
};
-
- axi@d4200000 {
- compatible = "simple-bus";
- reg = <0 0xd4200000 0 0x200000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0xd4200000 0x200000>;
-
- usbphy: phy@7000 {
- compatible = "marvell,pxa1928-usb-phy";
- reg = <0x7000 0x200>;
- clocks = <&apmu PXA1908_CLK_USB>;
- #phy-cells = <0>;
- };
-
- usb: usb@8000 {
- compatible = "chipidea,usb2";
- reg = <0x8000 0x200>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apmu PXA1908_CLK_USB>;
- phys = <&usbphy>;
- phy-names = "usb-phy";
- };
-
- sdh0: mmc@80000 {
- compatible = "mrvl,pxav3-mmc";
- reg = <0x80000 0x120>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apmu PXA1908_CLK_SDH0>;
- clock-names = "io";
- mrvl,clk-delay-cycles = <31>;
- };
-
- sdh1: mmc@80800 {
- compatible = "mrvl,pxav3-mmc";
- reg = <0x80800 0x120>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apmu PXA1908_CLK_SDH1>;
- clock-names = "io";
- mrvl,clk-delay-cycles = <31>;
- };
-
- sdh2: mmc@81000 {
- compatible = "mrvl,pxav3-mmc";
- reg = <0x81000 0x120>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apmu PXA1908_CLK_SDH2>;
- clock-names = "io";
- mrvl,clk-delay-cycles = <31>;
- };
-
- apmu: clock-controller@82800 {
- compatible = "marvell,pxa1908-apmu";
- reg = <0x82800 0x400>;
- #clock-cells = <1>;
- };
- };
};
};