From e50d238a1ce856d3e16bbc279a6e92a0c2b5fb4f Mon Sep 17 00:00:00 2001 From: Swapna Gurumani <swapna.gurumani@microchip.com> Date: Mon, 2 Dec 2019 21:06:10 +0000 Subject: [PATCH] configs: sama5d27_som1_ek: Add default config to read ENV from QSPI In the initial SPI flash setup, the default bus mode being used was 3, which is incorrect, causing a CRC error when the ENV was being read from QSPI. Setting the default bus mode to 0 which is the correct mode. Signed-off-by: Swapna Gurumani <swapna.gurumani@microchip.com> --- configs/sama5d27_som1_ek_qspiflash_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig index a77cc9d0e6..7328566797 100644 --- a/configs/sama5d27_som1_ek_qspiflash_defconfig +++ b/configs/sama5d27_som1_ek_qspiflash_defconfig @@ -47,6 +47,14 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_som1_ek" CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_USE_ENV_SPI_MAX_HZ=y +CONFIG_ENV_SPI_MAX_HZ=50000000 +CONFIG_USE_ENV_SPI_MODE=y +CONFIG_ENV_SPI_MODE=0x0 CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -- 2.39.5